Body-Solid SWT1000 User manual

Brand
Body-Solid
Model
SWT1000
Category
Fitness, gymnastics & weight training
Type
User manual

Body-Solid SWT1000 is a weight tree designed for storing weight plates. It is made of durable steel construction and has a powder-coated finish for added protection. The SWT1000 can hold up to 1,000 pounds of weight plates and has four upright posts with six weight horns on each post. This allows for easy access to weights and helps to keep your workout area organized.

Body-Solid SWT1000 is a weight tree designed for storing weight plates. It is made of durable steel construction and has a powder-coated finish for added protection. The SWT1000 can hold up to 1,000 pounds of weight plates and has four upright posts with six weight horns on each post. This allows for easy access to weights and helps to keep your workout area organized.

&
Assembly Instructions
OWNER’S MANUAL
v. SWT1000-090815
SWT1000
Warning, Safety & Maintenance
2
Be sure that all users carefully read and understand all
warning, safety and maintenance labels on the machine
before each use. Failure to do so may result in death or
serious injury.
It is imperative that you retain this Owner’s Manual and be
sure all warning labels are legible and intact. Replacement
Owner’s Manuals and warning labels are available from your
local Body-Solid dealer.
If you have any questions about the operation, set up or
maintenance of this machine please call our customer service
department at 1 (800) 556-3113.
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT.
TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
Inspect equipment before each workout.
Check that all nuts and bolts are in place and fully tightened.
Also, before use, check for signs of wear. Replace all worn parts immediately.
Never use equipment if any parts are damaged or missing.
FAILURE TO FOLLOW THESE RULES MAY RESULT IN INJURY.
Exercise with care. Perform your exercise at a smooth, moderate pace; never perform jerky or
uncoordinated movements that may cause injury.
DO NOT allow children or minors to play on or around this equipment.
If unsure of proper use of equipment, call your local Body-Solid distributor or the Body-Solid
customer service center at (800) 556-3113.
Consult your physician before starting your exercise program.
For your own safety, DO NOT begin any exercise program without proper instruction.
Table of Contents
3
• SAFETY INSTRUCTIONS.............................. PAGE 4
• PREPARATION............................................... PAGE 5
• HARDWARE LIST........................................... PAGE 6
• PARTS LIST.................................................... PAGE 7
• HARDWARE ILLUSTRATION........................ PAGE 8
• ASSEMBLY INSTRUCTIONS........................ PAGE 10
• EXPLODED VIEW......................................... PAGE 14
• CONTACT PAGE........................................... PAGE 16
Important Safety Instructions
4
Beforebeginninganytnessprogram,youshouldobtainacompletephysicalexaminationfromyourphysician.
Il est conseille de subir un examen medical complet avant d’entreprendre tout programme d’exercise.
Si vous avez des etourdissements ou des faiblesses, arretez les exercices immediatement.
Antes de comenzar cualquier programma de ejercicios, deberias tener un examen sico con su doctor.
When using exercise equipment, you
should always take basic precautions,
including the following:
m ReadallinstructionsbeforeusingtheSWT1000.
Theseinstructionsarewrittentoensureyoursafety
andtoprotecttheunit.
m Do not remove any safety labels from the
machine.
m Donotallowchildrenonorneartheequipment.
m Usetheequipmentonlyforitsintendedpurpose
asdescribedinthisguide.Donotuseaccessory
attachmentsthatarenotrecommendedbythe
manufacturer.Suchattachmentsmightcause
injuries.
m Wearproperexerciseclothingandshoesforyour
workout,nolooseclothing.
m Keephands,limbs,looseclothing,andlonghairwell
outofthewayofallmovingparts.
m Usecarewhengettingonorofftheunit.
m Donotoverexertyourselforworktoexhaustion.
m Ifyoufeelanypainorabnormalsymptoms,stop
yourworkoutimmediatelyandconsultyour
physician.
m Neveroperateunitwhenithasbeendroppedor
damaged.Returntheequipmenttoaservice
centerforexaminationandrepair.
m Neverdroporinsertobjectsintoanyopeningin
theequipment.
m Alwayschecktheunitanditscablesbeforeeach
use.Makesurethatallfastenersandcablesare
secureandingoodworkingcondition.
m Donotusetheequipmentoutdoorsornearwater.
Personal Safety During Assembly
m Beforebeginningassembly,pleasetakethetime
toreadtheinstructionsthoroughly.
m Readeachstepintheassemblyinstructionsand
followthestepsinsequence.Donotskipahead.
Ifyouskipahead,youmaylearnlaterthatyou
havetodisassemblecomponentsandthatyou
mayhavedamagedtheequipment.
m Assembleandoperatethe SWT1000onasolid,
level
surface.Locatetheunitafewfeetfromthewalls
orfurnituretoprovideeasyaccess.
TheSWT1000 isdesignedforyourenjoyment.Byfollow-
ingtheseprecautionsandusingcommonsense,youwill
havemanysafeandpleasurablehoursof
healthfulexercisewithyourBody-Solid Pro Club Weight
Tree.
Afterassembly,youshouldcheckallfunctionsto
ensurecorrectoperation.Ifyouexperienceproblems,
rstrechecktheassemblyinstructionstolocateany
possibleerrorsmadeduringassembly.Ifyouareunable
tocorrecttheproblem,callthedealerfromwhomyou
purchasedthemachineorcall1-800-556-3113forthe
dealernearestyou.
Obtaining Service
PleaseusethisOwner’sManualtomakesurethatall
partshavebeenincludedinyourshipment.When
orderingparts,youmustusethepartnumberand
descriptionfromthisOwner’sManual.Useonly
Body-Solidreplacementpartswhenservicingthis
machine.Failuretodosowillvoidyourwarrantyand
couldresultinpersonalinjury.
Forinformationaboutproductoperationorservice,
checkouttheofcialBody-Solidwebsiteat
www.bodysolid.comorcontactanauthorized
Body-SoliddealeroraBody-Solidfactory-authorized
servicecompanyorcontactBody-Solidcustomer
serviceatoneofthefollowing:
Toll Free: 1-800-556-3113
Phone: 1-708-427-3555
Fax: 1-708-427-3556
Hours: M-F 8:30-5:00 CST
E-Mail: [email protected]
Or write to: Body-Solid, Inc.
Service Department
1900 S. Des Plaines Ave.
Forest Park, IL 60130 USA
Retain this Owner’s Manual for future
reference. If you need to order replacement
parts please be prepared to provide the
following information when contacting us so
that we can assist you better.
1. Model Number
2. Place of Purchase
3. Serial Number (S/N)
4. Part # and Description
Preparation
5
Thankyouforpurchasingthe
SWT1000
.ThisbenchispartoftheBody-Solidlineofqualitystrengthtraining
machines,whichletsyoutargetspecicmusclegroupstoachievebettermuscletoneandoverallbody
conditioning. To maximize your use of the equipment please study this Owner’sManual thoroughly.
Body-Solidcontinuallyseekswaystoimprovetheperformance,specicationsandproductmanualsinordertoensurethatonly
superiorproductsarereleasedfromourfactories.Pleasetakethetimetocarefullyreadthroughthismanualthoroughly.Instructions
containedinthisdocumentarenotintendedtocoveralldetailsorvariationspossiblewithBody-Solidequipment,ortocoverevery
contingencythatmaybemetinconjunctionwithinstallation,operation,maintenanceortroubleshootingoftheequipment.Even
thoughwehavepreparedthismanualwithextremecare,neitherthepublishernortheauthorcanacceptresponsibilityforanyerrors
in,oromissionfrom,theinformationgiven.Shouldadditionalinformationberequired,orshouldsituationsarisethatarenotcovered
bythismanual,themattershouldbedirectedtoyourlocalBody-Solidrepresentative,ortheServiceDepartmentatBody-SolidInc.
inForestPark,Illinois.
Required Tools
Thebasictoolsthatyoumustobtainbeforeassembling
theSWT1000includebutarenotlimitedto:
m MetricAllenKeySet
m StandardAllenKeySet
m StandardWrenchSet
m MetricWrenchSet
m AdjustableWrench
m Screwdriver(standardand/orphillips)
Installation Requirements
Followtheseinstallationrequirementswhenassembling
theSWT1000:
SetuptheSWT1000onasolid,atsurface.Asmooth,
atsurfaceunderthemachinehelpskeepitlevel.A
levelmachinehasfewermalfunctions.
Provideamplespacearoundthemachine.Open
spacearoundthemachineallowsforeasieraccess.
Insertallboltsinthesamedirection.Foraesthetic
purposes,insertallboltsinthesamedirectionunless
specied(intextorillustrations)todootherwise.
Leaveroomforadjustments.Tightenfastenerssuchas
bolts,nuts,andscrewssotheunitisstable,butleave
roomforadjustments.Donotfullytightenfasteners
untilinstructedintheassemblystepstodoso.
Fill out and mail the warranty card.
Assembly Tips
Readall“Notes”oneachpagebeforebeginningeach
step.
WhileyoumaybeabletoassembletheSWT1000using
theillustrationsonly,importantsafetynotesandother
tipsareincludedinthetext.
Somepiecesmayhaveextraholesthatyouwillnotuse.
Useonlythoseholesindicatedintheinstructionsand
illustrations.
NOTE: Withsomanyassembledparts,proper
alignmentandadjustmentiscritical.While
tighteningthenutsandbolts,besuretoleave
roomforadjustments.
NOTE: Thebottlesthataremarked“Poison”isyour
touchuppaint.Keepawayfromchildren.
CAUTION: Obtainassistance!Ifyoufeellikeyoucan’t
assembletheSWT1000byyourselfthendo
notattempttodosoasthiscouldresultin
injury.Reviewtheinstallationrequirements
beforeproceedingwiththefollowingsteps.
YourS/N#can
befoundhere
↑
6
SWT1000 Hardware List
Part# Size Description Quantity
1
2
3
4
5
6
7
8
M10x125mm
M10x75mm
M10x70mm
M10x30mm
M10
ID11xOD28mm
M10
M10
HEX HEAD BOLT
HEX HEAD BOLT
BUTTON HEAD CAP SCREW
BUTTON HEAD CAP SCREW
FLAT WASHER
LARGE FLAT WASHER
LOCK WASHER
NYLON LOCK NUT
2 PCS.
2 PCS.
8 PCS.
16 PCS.
16 PCS.
24 PCS.
12 PCS.
12 PCS
7
SWT1000 Parts List
Part# Description Quantity
A
B
C
D
E
F
9
UPRIGHT
LOWER CENTER CROSS FRAME
LOWER SIDE CROSS FRAME
UPPER CENTER CROSS FRAME
UPPER SIDE CROSS FRAME
WEIGHT HORN
RUBBERDONUT,
ø50xø80x15mm
4 PCS.
1 PCS.
2 PCS.
1 PCS.
2 PCS.
12 PCS.
12 PCS.










45
8
SWT1000 Hardware Illustration
Part#1 HEX HEAD BOLTM10x125mm QTY.2
Part#2 HEXHEADBOLTM10x75mm QTY.2
Part#3 BUTTONHEADCAPSCREWM10x70mm QTY.8
Part#4 BUTTONHEADCAPSCREWM10x30mm QTY.16
Part#5 FLATWASHERM10 QTY.16















































































45
9
SWT1000 Hardware Illustration
Part#7 LOCKWASHERM10 QTY.12
Part#8 NYLONLOCKNUTM10 QTY.12
Part#6 LARGEFLATWASHERID11xOD28mm QTY.24
























































































10
STEP
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten unless instructed.
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto
bolts, they must be wrench tighten to fully go on.
1A. AttachtwoLowerCrossFrames(C)toLowerCenterCross
Frame(B) using:
2 - (#1) M10x125mm Hex Head Bolt
4 - (#5) M10 Flat Washer
2 - (#8) M10 Nylon Lock Nut
1A. AttachUprights(A)toCrossFrames(C & B)using:
8 - (#3) M10x70mm Button Head Cap Screw
8 - (#5) M10 Flat Washer
8 - (#8) M10 Nylon Lock Nut
8 - (#6) Large Flat Washer ID11xOD28mm
STEP
1
AboveshowsStep1assembledandcompleted.
11
12
STEP
2
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware rst in this step. Wrench tighten ALL hardware at the end of
and after STEP 2B. Some components may be pre-assembled. Nylon lock nuts will not
fully screw onto bolts, they must be wrench tighten to fully go on.
2A. AttachUpperCenterCrossFrame(D)toUprights(A)using:
2 - (#4) M10x30mm Button Head Cap Screw
2 - (#6) Large Flat Washer ID11xOD28mm
2A. AttachUpperSideCrossFrames(E)toUpperCenterCross
Frame(D)using:
2 - (#2) M10x75mm Hex Head Bolt
4 - (#5) M10 Flat Washer
2 - (#8) Nylon Lock Nut
2B. AttachUpperSideFrames(E)toUprights(A)using:
2 - (#4) M10x30mm Button Head Cap Screw
2 - (#6) Large Flat Washer ID11xOD28mm
2C. AttachWeightHorns(F)toUprights(A)using:
12 - (#4) M10x30mm Button Head Cap Screw
12 - (#6) Large Flat Washer ID11xOD28mm
12 - (#7) Lock Washer
2D. InsertRubberDonuts(9)ontoWeightHorns(F)
13
STEP
2
AboveshowsStep2assembledandcompleted.
45
14
SWT1000 Exploded View
15
Notes
1900S.DesPlainesAve.
ForestPark,Il60130
Phone:(708)427-3555
Fax:(708)427-3556
Hours:M-F8:30-5:00CST
www.bodysolid.com
Copyright 2009. Body-Solid. All rights reserved. Body-Solid reserves the right to change design and specications when we feel it will improve the product.
Body-Solid machines maintain several patented and patent pending features and designs. All rights reserved on all design patents and utility patents.
PLEASE WRITE YOUR SERIAL NUMBER IN THE BOXES BELOW
S/N# 010185-��-��-����-����
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Body-Solid SWT1000 User manual

Brand
Body-Solid
Model
SWT1000
Category
Fitness, gymnastics & weight training
Type
User manual

Body-Solid SWT1000 is a weight tree designed for storing weight plates. It is made of durable steel construction and has a powder-coated finish for added protection. The SWT1000 can hold up to 1,000 pounds of weight plates and has four upright posts with six weight horns on each post. This allows for easy access to weights and helps to keep your workout area organized.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents