2. Davis Instruments
  3. Bumper Buddy

Davis Instruments Bumper Buddy Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Davis Instruments Bumper Buddy Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTRUCTIONS
3465 Diablo Ave., Hayward, CA 94545 U.S.A.
Phone (510) 732-9229 • Fax (510) 732-9188
inf[email protected] www.davisnet.com
1467_Ins.pdf June 2008
#1467
Bumper Buddy
®
is easy on…easy off… easy to
adjust. This streamlined product helps attach bumpers
in a matter of seconds, without having to tie a knot or
use screws to attach a holder permanently. Clips onto
rails, lifelines, windshields, or cleats and it's ready to
use.
• Snap over RAILS and WINDSHIELDS.
• For LIFELINES, install at uprights to prevent sliding.
• To fit CLEATS, slide on horizontally.
Accepts up to 3/8" (9.5 mm) diameter line and adjusts
in a matter of seconds.
Fishermen can also use Bumper Buddy to hold a fish
basket or minnow bucket.
Note: Bumper Buddy was discontinued in 2004.
See #393 Fender Tender II
®
, an equivalent product
offered by Davis.
/