TP-LINK KP100 KIT Quick Installation Guide

TP-LINK
Brand
TP-LINK
Model
KP100 KIT
Type
Quick Installation Guide

This manual is also suitable for

Kasa Wi-Fi Smart Plug Mini Installation
OR scan
QR code
1 Download Kasa for Mobile from the App Store or
Google Play.
2 Connect your mobile device to a 2.4GHz Wi-Fi
network.
3 Launch Kasa and follow the in-app instructions
to connect the Kasa Wi-Fi Smart Plug Mini to
your network.
Note: The Kasa Wi-Fi Smart Plug Mini only supports 2.4GHz
networks.
Note: The U.S. plug version is used throughout the Kasa app.
Support
Visit www.tp-link.com/support for technical support
and troubleshooting information.
7106507749 REV 1.0.0
Sketch 9:41 AM 100%
DONE
Great!
Your Smart Plug Mini is all set up.
It is now saved in your Device List.
Sketch 9:41 AM 100%
Power up your Smart Plug Mini
NEXT
Plug in your Smart Plug Mini. If you
don’t see the LED light, press the
power button once.
Quick Start Guide
KP100
Add Device
Sketch 9:41 AM 100%
Smart Plug
Smart Plug Mini
Smart Bulb
Smart Switch
Kasa Wi-Fi Smart Plug Mini
Press to turn the socket ON or OFF.
Press and hold for 5 seconds or until the LED
flashes amber and blue alternately to initiate
the configuration process (SoftAP).
Press and hold for 10 seconds or until the LED
flashes amber rapidly to factory reset the Kasa
Wi-Fi Smart Plug Mini.
Flashing amber and blue: Configuring.
Flashing blue rapidly: Connecting to the
network.
Solid blue: Connected to the network.
Flashing amber rapidly: Factory resetting.
Solid amber: Initializing, rebooting, or no
network connection.
Off: The Kasa Wi-Fi Smart Plug Mini is
switched OFF.
Troubleshooting
1. What devices can I control with the Kasa Wi-Fi Smart Plug Mini?
You can control lights, fans, humidifiers, portable heaters, and
any small appliances in accordance with the Kasa Wi-Fi Smart
Plug Mini’s specifications.
2. What should I do when I can’t turn devices on or off using Kasa?
• Make sure the device connected to the Kasa Wi-Fi Smart Plug
Mini is switched to ON.
• Make sure the Remote Control feature in the app is enabled to
control your devices from outside of your home.
3. What should I do when the LED is lit solid amber?
A solid amber light indicates no network connection.
• Check your network connectivity.
• Relocate the Kasa Wi-Fi Smart Plug Mini. Avoid placing the
Kasa Wi-Fi Smart Plug Mini near potential sources of radio
signal interference.
• Repeat the configuration process.
• Factory reset the Kasa Wi-Fi Smart Plug Mini and try to add it
again.
4. How do I pair the Kasa Wi-Fi Smart Plug Mini with Amazon Echo?
Visit www.tp-link.com/en/faq-944.html or within the Kasa Help
section for pairing instructions.
© 2017 TP-Link. All rights reserved.
LED
Supported Load Types:
Coffee Maker: 800 W
Desk Lamp: 235.2 W
LCD: 270 W
Heater: 1500 W
Humidifier: 260 W
Iron: 1500 W
Toaster: 850 W
Tower Fan: 50 W
  • Page 1 1
  • Page 2 2

TP-LINK KP100 KIT Quick Installation Guide

TP-LINK
Brand
TP-LINK
Model
KP100 KIT
Type
Quick Installation Guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers