KRAUS KHU101-23-KPF1622-KSD30CH Operating instructions

Brand
KRAUS
Model
KHU101-23-KPF1622-KSD30CH
Type
Operating instructions

This manual is also suitable for

Single Lever Pull-Out
Kitchen Mixer
KPF-1622
www.kraususa.com I Toll Free: 1.800.775.0703 I ©2017 Kraus USA Inc. I REV. August 7, 2017
INSTALLATION GUIDE
1
Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep teh box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
2
PRIOR TO INSTALLATION
• Make sure you have all necessary parts by checking the diagram and parts
list. If any part is missing or damaged, please contact Kraus Customer
Service at 800-775-0703 for a replacement
• Turn o the hot and cold water supply at the angle stops and turn on the
old faucet to release any built up pressure. Remove existing faucet. Clean
sink or countertop to remove any debris, plumber’s putty, or silicone
• Place bucket under angle stops. Turn on to ush any debris prior to
installing new plumbing. Shut o angle stops
• Pre-drilled hole size requirement: 1-3/8”
• Max countertop thickness without deck plate: 1-3/8”
Tools Required
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or C[email protected]
Adjustable Wrench
6 5/8”
5 4/5”
3/8”
(10mm)
7/8”
19.7
º
(22mm)
8 5/16”
1 1/4-18UNF-2A
(21mm)
10 1/8”
(257mm)
1 3/8”
(35mm)
3 3/4”
(168mm)
(147.3mm)
(96mm)
∅ 1 3/4”
(
∅ 45mm)
∅ 1 15/16”
(
∅ 50mm)
9/16”-18UNEF
27mm ~ 41.3mm
1 1/16” ~ 1 5/8”
∅ 1 15/16”
(
∅ 50mm)
12 7/16”
(316mm)
1 5/8”
(42.5 mm Max)
7A
8B
8C
8D
8A
7A
8B
8C
8D
8A
Silicone Sealant
6 5/8”
5 4/5”
3/8”
(10mm)
7/8”
19.7
º
(22mm)
8 5/16”
1 1/4-18UNF-2A
(21mm)
10 1/8”
(257mm)
1 3/8”
(35mm)
3 3/4”
(168mm)
(147.3mm)
(96mm)
∅ 1 3/4”
(
∅ 45mm)
∅ 1 15/16”
(
∅ 50mm)
9/16”-18UNEF
27mm ~ 41.3mm
1 1/16” ~ 1 5/8”
∅ 1 15/16”
(
∅ 50mm)
12 7/16”
(316mm)
1 5/8”
(42.5 mm Max)
7A
8B
8C
8D
8A
7A
8B
8C
8D
8A
Phillips Screwdriver
Safety Goggles
Bucket
3
Diagram and Parts List
A. Faucet Body
B. Aerator Head
C. Base
D. Base O-Ring
E. Mounting Hardware Assembly
E1 Rubber& Metal Washer
E2 Mounting Nut
E3 Mounting Screws
F. Weight
G. Hot & Cold Waterlines
H. Spray Hose
I. Spacer
J. Check Valve
Included Parts:
1. Faucet Body
2. Aerator Head
3. Base
4. Base O-Ring
5. Rubber Washer
6. Mounting Nut
7. Mounting Screws
8. Weight
9. Hot & Cold Waterlines
10. Spray Hose
11. Spacer
KPF-1622 Diagram and Parts List
2
Aerator
Pull Out Hose
14 3/4”
1
3
4
5
6
7
8
10
11
9
Wrench
Phillips Screwdriver
Tools you will need:
3
2
Aerator
Pull Out Hose
14 3/4”
1
4
5
6
7
8
9
10 12
13
11
3
2
Aerator
14 3/4”
1
4
5
6
7
8
9
10 12
13
11
12
12. Check Valve
A
B
D
C
E1
E2
E3
F
G
H
I
J
4
Faucet Dimensions
7”
(179 mm)
12°
8 -1/4”
(209 mm)
9 -3/8”
(239 mm)
6 -7/8”
(175 mm)
5-3/8”
(135 mm)
2 -5/8”
(66 mm)
14 -7/8”
(377 mm)
2 -1/8”
(53 mm)
360°
5
Faucet Dimensions
7”
(179 mm)
12°
8 -1/4”
(209 mm)
9 -3/8”
(239 mm)
6 -7/8”
(175 mm)
5-3/8”
(135 mm)
2 -5/8”
(66 mm)
14 -7/8”
(377 mm)
2 -1/8”
(53 mm)
360°
6
Faucet Installation Methods
Installation Method 1
Installation Method 2
The minimum distance between
the faucet hole and wall should
be 3.5”
If the distance between the
faucet hole and the wall is less
than 3.5”, position the faucet
lever 30 degrees to 90 degrees
off the wall to allow for full
operation
Mi
nimum d
istance 3.5
1. Remove mounting screws (9), mounting nut (8), metal washer (7),
and rubber washer (6) from the faucet body (1).
Mi
nimum d
istance 3.5
Less than
Ø35~Ø38
Ø1
~Ø1
Step 1
1
6
7
8
9
Faucet Installation Methods
Installation Method 1
Installation Method 2
The minimum distance between
the faucet hole and wall should
be 3.5”
If the distance between the
faucet hole and the wall is less
than 3.5”, position the faucet
lever 30 degrees to 90 degrees
off the wall to allow for full
operation
1. Remove mounting screws (9), mounting nut (8), metal washer (7),
and rubber washer (6) from the faucet body (1).
Mi
nimum d
istance 3.5
Less than
Ø35~Ø38
Ø1
~Ø1
Step 1
1
6
7
8
9
1. Remove mounting screws (9), mounting nut (8), metal washer (7),
and rubber washer (6) from the faucet body (1).
Mi
nimum d
istance 3.5
Less than
Ø35~Ø38
Ø1
~Ø1
Step 1
1
6
7
8
9
Faucet Installation Procedures
Installation Method 1
Installation Method 2 (optional)
The minimum distance between
the faucet hole and the wall should
be 3.5”
If the distance between the faucet
hole and the wall is less than 3.5,”
position the faucet lever 30° to
90° off the wall to allow for full
operation
7
Step 1
1. Remove mounting screws (9), mounting nut (8), metal washer (7),
and rubber washer (6) from the faucet body (1).
Ø35~Ø38
Ø1
~Ø1
Step 1
1
Installation Steps
Step 2
Step 1
1. Remove mounting screws (9), mounting nut (8), metal washer (7),
and rubber washer (6) from the faucet body (1).
Ø35~Ø38
Ø1
~Ø1
Step 1
1
Installation Steps
Step 2
Remove mounting hardware
assembly (E)
Connect waterlines (G) to hot and
cold copper lines on faucet
E1
E2
E3
9
Step 6
Hot
Water
Cold
Water
Installer Tip
F
E
G
F
Hexagon Nut
Hot
Water
Cold
Water
Close
Open
Left
Hot Water
Push
25˚
90˚
Step 5
KPF-1602.indd 9 2016-08-09 3:39 PM
A
J
Use two wrenches when
securing waterlines (G) to
copper lines to prevent kinking,
as shown in picture
Step 1
Step 2
8
t the faucet body (1) into the hole on the deck with the base
(4) and base o-ring (5), and then install the rubber washer (6),
metal washer (7), mounting nut (8) and mounting screws (9) from
underneath the sink.
1
8
Step 3
2. Insert the faucet body (1) into the hole on the deck with the base
(4) and base o-ring (5), and then install the rubber washer (6),
metal washer (7), mounting nut (8) and mounting screws (9) from
underneath the sink.
4
5
6
7
8
9
3. After adjusting the direction of the faucet body (1), tighten the
mounting nut (8) until snug and tighten the mounting screws (9) to
Step 4
Step 3
t the faucet body (1) into the hole on the deck with the base
(4) and base o-ring (5), and then install the rubber washer (6),
metal washer (7), mounting nut (8) and mounting screws (9) from
underneath the sink.
1
8
Step 3
2. Insert the faucet body (1) into the hole on the deck with the base
(4) and base o-ring (5), and then install the rubber washer (6),
metal washer (7), mounting nut (8) and mounting screws (9) from
underneath the sink.
4
5
6
7
8
9
3. After adjusting the direction of the faucet body (1), tighten the
mounting nut (8) until snug and tighten the mounting screws (9) to
Step 4
Step 3
Insert faucet body (A) into hole
on deck or sink with base (C) and
base o-ring (D) attached. Attach
mounting hardware assembly (E)
Adjust faucet body (A). Secure
mounting hardware (E) with
wrench and Phillips head
screwdriver
E1
C
D
E2
E3
A
A
E
9
Step 6
Hot
Water
Cold
Water
Installer Tip
F
E
G
F
Hexagon Nut
Hot
Water
Cold
Water
Close
Open
Left
Hot Water
Push
25˚
90˚
Step 5
KPF-1602.indd 9 2016-08-09 3:39 PM
A
J
Step 3
Step 4
9
Connect spray hose (H) to check
valve (J) and tighten with an
adjustable wrench.
9
Step 6
Hot
Water
Cold
Water
Installer Tip
F
E
G
F
Hexagon Nut
Hot
Water
Cold
Water
Close
Open
Left
Hot Water
Push
25˚
90˚
Step 5
KPF-1602.indd 9 2016-08-09 3:39 PM
A
J
Insert washer
Step 5
Step 6
Step 4
4. Connect the spray h
with a wrench until snug
hose (12). Connect h
and tighten with a wrench, then turn on water supplies and check
leaks.
Attach weight (F) to lowest point
vertically on spray hose (H)
Connect and tighten waterlines (G)
to angle stops. Turn on the angle
stops and check for leaks
(DO NOT TURN FAUCET ON)
Step 5
Step 6
Step 4
4. Connect the spray h
with a wrench until snug
hose (12). Connect h
and tighten with a wrench, then turn on water supplies and check
leaks.
Installer Tip
Remove aerator and turn faucet on
for 60 seconds to flush any debris
F
H
J
A
Step 5
Step 6
10
3
2
Aerator
Pull Out Hose
8 1/2”
25˚
Close
Open
110
˚
Left
Hot Water
Right
Cold Water
Swiveling Range
360
˚
7”
14 3/4”
360˚
1
4
5
6
7
8
9
10 12
13
11
1. Pull the lever to the right to
turn on the water. Push to the
left to turn off
2. Pull the lever forward to
increase hot water flow and
push the lever back to increase
the cold water flow
3
2
Aerator
Pull Out Hose
8 1/2”
25˚
Close
Open
110
˚
Left
Hot Water
Right
Cold Water
Swiveling Range
360
˚
7”
14 3/4”
360˚
1
4
5
6
7
8
9
10 12
13
11
Usage
How to Operate the Handle
How to operate the handle:
Usage
Pull the lever to the right to turn
on the water. Push to the left to
turn off
Pull the lever forward to
increase hot water flow and
push the lever back to increase
the cold water flow
1.
2.
11
Replacement Parts
1. Aerator Assembly
2. Hose
3. Aerator Head
4. Set Screw
5. Cap
6. Set Screw
7. Cap
8. Handle
9. Cartridge Cover
10. Locking Nut
11. Cartridge
12. Base
13. Base O-Ring
14. Rubber & Metal Washer
15. Mounting Nut
16. Mounting Screw
17. Protective Sleeve
18. Weight
19. Check Valves
20. Connector
21. Washer
22. Hot & Cold Waterlines
23. Hex Wrenches 2mm &
2.5mm
24. Spacer (Optional)
4
8
3
1c
1b
1a
11
10
9
7
6
19
20
18
14
16
5
12
24
2
13
15
17
21
22
23
Care & Maintenance
*To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
*This installation manual is subject to change without further notice.
12
Water will not shut off
completely
Cartridge (11 ) may be
defective
Remove cap (7) at
bottom of handle
(8). Loosen set screw
(6) with 2.5mm hex
wrench (23). Remove
the handle (8) and
unscrew cartridge cover
(9) by hand. Unscrew
locking nut (10) with
an adjustable wrench.
Remove ceramic disc
cartridge. Check for
cracks
Aerator (1) drips or has
inconsistent water
flow pattern
Aerator (1) is dirty or
not seated properly
Unscrew aerator (1)
by hand and clean out
debris
Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM CAUSE ACTION
Leakage under handle
(8)
Locking nut (10) has
come loose
Remove cap (7) at
bottom of handle
(8). Loosen set screw
(6) with 2.5mm hex
wrench (23). Remove
the handle (8) and
unscrew cartridge cover
(9) by hand. Tighten
locking nut (10) with an
adjustable wrench
13
Codes/Standards Applicable:
Meets ASME A112.18.1M/A112.18.1
1.75gpm 6.6L/min maximum
GREEN
Water Eciency
LEAD FREE
I
A
P
M
O
R
&
T
TM
NSF/ANSI Standard 61 certied by IAPMO
NSF/ANSI Standard 372 certied by IAPMO
FAUCET WARRANTY
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends
this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty
is non-transferable.
Kraus warrants the structure and nish of the product to be free from defects in material and workmanship under
normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or
trade professional, from an authorized Kraus dealer, through the lifetime of
the original owner or end-user.
Kraus warrants the mechanical component (sprayhead assembly) of the product to be free from defects in material
and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of
purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the
original owner or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and
workmanship under normal usage for a period of ve (5) years. The warranty commences from the initial date of
purchase by the owner or trade professional, from an authorized Kraus dealer, through the ve (5) year term of the
original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty
period will be repaired
or replaced with a product of equal value at the option of Kraus. This warranty
extends to the original owner or end-user,
and is not transferable to a subsequent owner.
RESTRICTIONS
This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at
discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not cover instances of negligence,
misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive
materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care
or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia,
alcohol, or
chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the
nish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions
supplied by Kraus and all applicable rules, regulations, and legiswlation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional.
Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does
not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other
consequential damages, and Kraus accepts no liability for such damages.
This warranty does not cover Marine or Outdoor Installation.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of
merchantability and tness for a particular purpose, or compliance with any code. Shipping charges will be covered for
14
the rst (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply).
International shipping fees are not included.
COMMERCIAL WARRANTY
Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and
business use.
All incidental or consequential damages are specically excluded. No additional warranties, express or implied, are given,
including but not limited to any implied warranty of merchantability or tness for a particular purpose.
ome states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an
implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
[email protected]
If you are a plumbing contractor or trade professional please contact a Kraus
Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
[email protected]
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance
IMPORTANT
Register Your Kraus Product
REGISTER TODAY
http://www.kraususa.com/registration
Activate Your Warranty
Access Premium Customer Support
Get Product Information
www.kraususa.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

KRAUS KHU101-23-KPF1622-KSD30CH Operating instructions

Brand
KRAUS
Model
KHU101-23-KPF1622-KSD30CH
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents