MR Direct V120-W Installation guide

Category
Kitchen sinks
Type
Installation guide
Vessel sinks are designed to be
mounted upon the countertop. They
are available in porcelain, glass,
stone, bronze, copper, bamboo, and
stainless steel. For models which
have a rounded bottom, a sink ring
is typically installed below the basin
in order to stabilize it.
THE INSTALLATION OF ANY VESSEL-STYLE SINK
Vessel
Sinks
877.946.5725
Toledo, Ohio
www.MRDirectInt.com
Details on Back q
INSTALLATION
INSTRUCTIONS
ABOVE COUNTER
INSTALLATION
More on Front q
THE STEPS
ABOVE COUNTER INSTALLATION
INSTALLATION
INSTRUCTIONS
CONTINUED
877.946.5725
Toledo, Ohio
www.MRDirectInt.com
Vessel
Sinks
Measure and cut a hole in the countertop matching the
diameter of the drain pipe.
If the bowl has a curved bottom it will require a sink ring.
Position the ring on the counter over the drain hole, then rest
the basin on the ring.
If the bowl has a at bottom it can be rested directly on the
counter without a sink ring.
Install the drain.
  • Page 1 1
  • Page 2 2

MR Direct V120-W Installation guide

Category
Kitchen sinks
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI