Mircom FleXNet BBX-FXMNSRG Installation guide

Mircom
Brand
Mircom
Model
FleXNet BBX-FXMNSRG
Type
Installation guide

This manual is also suitable for

LT-6091 Rev 1
Nov 2014 Page 1 of 2
BBX-FXMNSRG
FleXNet
TM
Mass Notification System
Installation Instructions
FleXNet
TM
Mass Notification System (BBX-FXMNSRG) Enclosure
The BBX-FXMNSRG enclosure includes a backbox and a two part door and display deadfront chassis. This
enclosure can accommodate all the FleXNet
TM
Fire Alarm and audio models, QMP-5101NV vertical mounting master
paging microphone and the QMT-5302NV Master Telephone panels. Refer to Figure 1 for the enclosure dimensions.
Figure 1: BBX-FXMNSRG Enclosure with Dimensions
22.4
62.7
9.0
7.6
1.5
27.0
46.6
51.1
2.0
61.1
7.6
9.0
22.4
20.0
BBX-FXMNSRG
LT-6091 Rev 1
Nov 2014 Page 2 of 2
The backbox holds the fire alarm system FX-2000MNS, adder modules, the audio card cage QMB-5000N, PS-2040
Power Supply and batteries. The inner door or deadfront chassis holds the fire alarm display module, annunciator
modules and the QMP-5101NV Network Master Microphone Paging module and the QMT-5302NV Network Master
Telephone Module.
Figure 2: Expanded View of the BBX-FXMNSRG Enclosure
BBX-FXMNS FRONT DOORS
AND DEADFRONT CHASSIS
BBX-FXMNS BACKBOX
QMB-5000N
Audio Card Cage
FX-2000MNS
Fire Alarm
Board with
Adder
modules
PS-2040
Power Supply
Batteries
Fire Alarm Display
QMP-5101NV
Microphone
QMT-5302NV
Telephone
  • Page 1 1
  • Page 2 2

Mircom FleXNet BBX-FXMNSRG Installation guide

Mircom
Brand
Mircom
Model
FleXNet BBX-FXMNSRG
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents