WINONLY sleep headphone User manual

  • Hello! I am an AI chatbot trained to assist you with the WINONLY sleep headphone User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
WINONLY
Sleep Headphone Bluetooth Headband
USER MANUAL
Warranty:
Contact Us:
For warranty service or support, Please contact our
Service Team, WINONLY promises: FREE RETURN, FREE
REPLACEMENT or FULL REFUND to solve your issue and
make you satisfied.
info@winonly-us.com
www.winonly-us.com
18883692169
(Toll Free:4:30PM-6:00AM PST
To Activate Lifetime Warranty:
Fashion head wearing bluetooth
Operation guide
Product Factory Configuration
1. Head wearing bluetooth-1 Pc
2. Instruction Menu---1Pc
3. Charging cable---1Pc(Matching)
Product Specification
1. Charging Time 2-2.5 hours
( Please charge it first before use)
2. Bluetooth continuous working
Time: more than 8 Hours
3. Power/Handfree/Stop/Play
4. Vol Down/Next
5. Vol Up/previous
How to connect Bluetooth
1. Close all your bluetooth in the phone
2. Long press the "on/off" button to red/blue light flash.
3. Open your bluetooth in the phone, find the Bluetooth name
BT-FAAH, then connect.
4.You can listen to the music directly after connect the bluetooth.
5. Only connect bluetooth in one device at one time, please make sure disconnect
with the previous bluetooth device when connect a new device.
Bluetooth Music Play Instruction:
1. Press once PLAY/STOP button start playing,press once again to stop playing
2. Press Vol- for previous song
3. Press Vol+ for next song
4. Long press Vol- will constant reduce volume to minimum, a
di di di'sound will be heard when reaches minimum level;
Long press Vol+ will constant increase Volume to max, a ' di di di'
sound will be heard when reaches max level
Bluetooth Handfree
1. Incoming call, press once PLAY/STOP Button for auto receives call.
2. Incoming call, press and hold PLAY/STOP button for 3 sec to reject
call.
3. During call, long press PLAY/STOP Button for 3 sec to switch to
mobile device,press.
PLAY /STOP Button again for 3 sec will switch back to earphone.
Charging Function Operation Instruction
1. Connect the Android Data Cable to USB charger( or computer USB
port),the other end connect to our device as shown on the right
diagram,our device have a LED indication on the right, RED light
constant on shows that device is charging, RED Light off and then became
blue when charged fully.
Notes:
-Open the bluetooth in your phone and match with bluetooth name
"BT-FAAH"
-Can be washable when take out the bluetooth module.
-Both speakers are not fixed, can adjust placement accordingly
based on your size
-Please check USB cable if can’t work to charge.
-Please adjust the volume from your mobile or Long press Vol+ from
Bluetooth if you can’t hear any music.
- The sound may have a bit noise if there’s environmental
interference
-If you have any problem with using our product, please contact us
Directly via order id. We promise to solve the
problem for you 100%. Your using experience and suggestions will
be a great help to improve better.
/