IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning and danger labels.
Lea el manual de operación anexo sobre ensamblaje e inicio.
Place PTO (Blade Engage) Lever
in Off position.
Move Throttle to Choke position.
Move Throttle to Rabbit (fast) position.
Insert key and turn to Start position.
Release after engine starts.
Place Shift Lever in N
(neutral) position.
Fully depress the Brake Pedal.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
778-10729C© 2006 13AM762F765
Is the battery connected? Fresh gas in the unit?
See Operator’s Manual for additional troubleshooting tips.
Stopping the Unit
Didn’t Start?
Put PTO (blade engage)
lever in the Off position.
Turn key counterclockwise to
Stop position and remove.
Depress brake pedal. Move
Speed Control Lever/Parking
Brake to P (park brake) position.
Place shift lever in N
(neutral) position.
PTO (Blade
Engage) Lever
Shift
Lever
Throttle
Ignition
Switch
Brake
Pedal
Speed Control/
Parking Brake
/