2. Beacon Products
  3. Square Tenon Adapter

Beacon Products Square Tenon Adapter Installation guide

  • I have reviewed the instruction sheet for the Hubbell Lighting SETAVP Tenon Adapter. This document provides detailed mounting steps, and tells about its compatibility with VP-L and VP-S poles. The adapter is made from aluminum with a powder paint finish and includes all necessary hardware. I am ready to answer any questions you have about this product.
  • What drill bit size is needed for mounting?
    What material is the Tenon Adapter made of?
    What is the weight of the adapter?
    How many set-screws are included?
Catalog Number: SETAVP
Instruction Sheet: 93090330
Shipping Package Contents:
SETAVP Tenon Adapter (1)
Top Cover (1)
3/8-16 Bolt (1)
3/8-16 Set Screw (4)
3/8 Split Washer (1)
3/8-16 Nut (1)
5/8 Plug (3)
5/16 Plug (6)
Material:
Aluminum
Finish:
Powder Paint
Weight:
15 lbs
EPA:
0.2 ft
2
Hubbel Lighting
701 Millennium Blvd
Greenville, SC 29607
Technical Support: (864) 678-1000
www.beaconproducts.com
SETAVP - SquareTenon Adapter
TENON ADAPTERS ACCESSORY
Mounting Notes:
Engage set-screws to adapter half way in.
Slip adapter to pole tenon, then tighten set-screws.
Mark tenon using hole "A" as guide.
Remove adapter from tenon.
Drill tenon thru walls using 7/16" (.437") diameter drill
bit.
Install adapter back to tenon securing it with 3/8-16
thru bolt, lockwasher, and hex nut.
Tighten set-screws.
The adapter is now ready for fixture installation.
Install 5/16 and 5/8 plugs into unused holes.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Compatible with: VP-L, VP-S
TENON END
3/8-16
BOLT
TOP COVER
3/8-16 SET
SCREW (4)
5/8 PLUG (3)
3/8 SPLIT
WASHER
3/8 NUT
O
2.50
4.00
2.00
TAPPED 5/16"-18
(8) PLCS
O
5/8"
O
.44
(4) PLCS
O
.31
(4) PLCS
1.00 2.00
7.25
2.50
1.25
12.50
5/16
PLUG (6)
/