Cumberland Farm Hand Relay Panels Owner's manual

Brand: Cumberland

Model: Farm Hand Relay Panels

Type: Owner's manual

Part No. 4801-0157 Owners Manual Farm Hand Relay Panels

Farm Hand Relay PanelsFarm Hand Relay Panels

2, 4, 8, or 12 Stage Relay Panels

Hired Hand, Inc.

1733 Co Rd 68

PO Box 99

Bremen, AL 35033

Part No. 4801-0157 Farm Hand Relay Panels Table of Contents

Table of Contents

1. Ratings and specifications........................................................................................................................ 1

2. Warnings................................................................................................................................................. 1

3. Limited Warranty.................................................................................................................................... 1

4. Physical Description/Drawing.................................................................................................................. 2

5. Use of Equipment.................................................................................................................................... 2

6. Installation .............................................................................................................................................. 2

6.1 Tools Required................................................................................................................................. 2

6.2 Instructions...................................................................................................................................... 2

7. Wiring Diagrams, Schematics, etc........................................................................................................... 3

7.1. Two Relay Panel.............................................................................................................................. 3

7.2. Four Relay Panel.............................................................................................................................. 4

7.3. Eight Relay Panel ............................................................................................................................ 5

7.4. Twelve Relay Panel.......................................................................................................................... 6

8. Exploded View Diagram/Parts List.......................................................................................................... 7

Part No. 4801-0157 Farm Hand Relay Panels 1

1. Ratings and specifications

The following applies to the coil for each stage:

Voltage: 120/240 VAC (depending upon model)

Frequency: 50/60 Hz

Operating Temperature: -40 C to +65 C

The following applies to the contacts on each stage:

30A @ 120/240 VAC, resistive load

1 HP @ 120 VAC

3 HP @ 240 VAC

2. Warnings

Warning!

High Voltage present inside the panel. If you need to reach inside the panel,

disconnect power first.

3. Limited Warranty

All products are warranted to be free from defects in material and workmanship for a period of

one year from the date of purchase if installed and used in strict accordance with the installation

instructions. Liability is limited to the sale price of any products proved to be defective or, at

manufacturers option, to the replacement of such products upon their return. No products are to

be returned to the manufacturer, until there is an inspection and/or a return-goods authorization

(RGA) number is issued.

All complaints should be directed first to the authorized distributor who sold the product. If

satisfaction is not obtained or the name of the distributor is not known, write the manufacturer

that appears below, directed to the attention of Customer Service Manager.

This limited warranty is expressly in lieu of any and all representations and warranties expressed

or implied, including any implied warranty of merchantability or fitness for a particular purpose.

The remedy set forth in this limited warranty shall be the exclusive remedy available to any

person. No person has authority to bind the manufacturer to any representation or warranty other

than this limited warranty. The manufacturer shall not be liable for any consequential damages

resulting from the use of our products or caused by any defect, failure or malfunction of our

products. (Some areas do not allow the exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may not apply to you.)

This warranty gives you specific legal rights and you may also have other rights that vary from

area to area.

Warrantor: Hired-Hand, Inc.

1733 Co. Rd. 68

PO Box 99

Bremen, AL 35033

Part No. 4801-0157 Farm Hand Relay Panels 2

4. Physical Description

The Farm Hand Relay Panels are enclosed in a plastic watertight box with two, four, eight, or

twelve switches on the front panel (depending upon model) coupled with each switch is a light to

show whether that particular stage is energized.

5. Use of Equipment

Hired Hand’s Farm Hand Relay system is a pre-wired set of heavy relays designed to allow

automatic switching of large loads. (Up to 3 Hp per stage.)

The Farm Hand Relay Panels allow you to manually turn on, or off the equipment wired to any or

all stages. Each stage has a three position switch. These positions are: ON—equipment will run

continuously, OFF—the equipment will not run, and AUTO—the equipment will run if a signal

is received from an external controller. If you want to turn a stage off and prevent it from

running, flip the switch for that stage to OFF.

6. Installation

6.1 Tools Required

Small Screwdriver Cordless Drill

Wire Strippers

6.2 Instructions

1. Unpack system, and check that all components are present.

2. Hang the Farm Hand Relay Panel using the four screws provided.

3. Make sure all power supplies are disconnected before breaking any wires, or reaching into

the panel.

4. Open the Farm Hand Relay Panel, and find all connections.

5. Connect wires from staged equipment to the appropriate stage. See wiring diagrams for

locations of terminals.

6. Connect the controller (if used) to the appropriate terminals inside the relay panel. See

wiring diagrams for location of the terminals.

Part No. 4801-0157 Farm Hand Relay Panels 3

7. Wiring Diagrams, Schematics, etc.

Your wiring

conncects here.

7.1 Two Relay Panel

Part No. 4801-0157 Farm Hand Relay Panels 4

Connect wires from breaker

panel, to stages, and to

controller to this terminal block.

7.2 Four Relay Panel

Part No. 4801-0157 Farm Hand Relay Panels 5

Connect wires from

breaker, to stages, and

controller to this terminal

strip as shown below.

7.3 Eight Relay Panel

Part No. 4801-0157 Farm Hand Relay Panels 6

Connect wires from

breaker, to stages and

controller to these

terminal strips as

shown below.

7.4 Twelve Relay Panel

Part No. 4801-0157 Farm Hand Relay Panels 7

8. Exploded View Diagram/Parts List

Part No. Description

1053-3026 Boot Switch Cover BLK

3006-5009 CONN Ter Block din rail mount

3006-5011 CONN Ter Block end stop

3015-2864 Swtch SPDT toggle cen off tab

3015-2879 RLY T92S7A22-120

3022-2613 LGHT Pnl 1252VAC red tabs (mod)

3001-2864

3022-2613

3015-2879

3006-5009

3006-5011

Cumberland Farm Hand Relay Panels Owner's manual

Cumberland Farm Hand Relay Panels Owner's manual

Cumberland Farm Hand Relay Panels Owner's manual

Related papers

Other documents