Little Partners LPA1002 User manual

Brand
Little Partners
Model
LPA1002
Type
User manual
PART LIST & HARDWARE
Solid Wood (x1) Safety Clip (x2)
A B
Strap (x2)
C
Sticker Pad (x4)
D
1
PRN: AIM-LPA1002/LPA1102-LPN [16.08.16]
!KEEP INSTRUCTIONS FOR FUTURE USE
!READ all instructions BEFORE assembly and USE of the product.
!Check after assembly and periodically during use at least once a month.
!Adult assembly required. Hardware contains small parts.
!Choking Hazard: unassembled parts may be a choking hazard.
!ENSURE EZ Fit Adaptor is tight and secure against the Banister Post and CANNOT be moved
before you attach any Safety Gate.
!ENSURE that you use ONLY an ASTM F1004-13 Certified Safety Gate with this product.
Placing fingers on either side of clip
prongs, apply pressure inward until clip
unlocks and can be pulled apart.
CLIP OPENING
PRESS PRESS
a. Thread strap with buckle through openings on the bottom of clip. Lift open buckle locking cover.
b. Make sure the rough side of velcro is on the inside of the clip.
c. Place clip on the hairy side of velcro and adjust as needed.
STRAP INSTALLATION
Make sure the pad location is same height as
the flat part of the post.
1 2
Sticker pad is placed where adapter meets
the post.
01-AISANN
01-AISANN
Rough side
of Velcro
Rough side
of Velcro
aC
b
Your EZ gate is designed to fit a maximum diameter post of 16”. Should your post be
larger than 16”, please call us for a longer strap.
Rough side of Velcro
Hairy side of Velcro
LPA1002/LPA1102
36” EZ-FIT SAFETY GATE ADAPTER KIT
PAD
Location
PAD
Location
peel off the back
D
D
A
2
PRODUCT PACKAGING INFORMATION
C
B
Place adapter
firmly against post.
Thread strap
through bottom
opening of
adapter and wrap
around post.
A
C
Thread enclosed
clip (opened) on
to strap.
Your EZ gate is
designed to fit a
maximum diameter
post of 16”. Should
your post be larger
than 16”, please
call us for a longer
strap.
Your EZ-Fit adapter is
ready for your safety
gate installation.
Install your safety gate using
manufacturer’s instructions. Some
installations may require 2 adapters.
one on each side.
7 8
3 4
LPA1002/LPA1102
36” EZ-FIT SAFETY GATE ADAPTER KIT
B
C
B
Thread end of strap through metal buckle.
Pull strap tight and fold end back over itself
to secure.
Hold metal buckle with one hand as you
pull to tighten strap with other hand.
Close clip over strap, snap
locked.
REPEAT ON THE TOP OPENING.
Make sure the metal
clasp is NOT on the
corner.
x
B
C
5 6
When attaching gate hardware
to your EZ Gate, ensure the
screws used are NOT longer than
the thickness of our product. Any
protruding screws may damage
staircase rails AND pose a safety
hazard.
IMPORTANT CAUTION
Model #: LPA1002 / LPA1102
Color: WHITE
Shipment Ref.#.
Date Code:
Distributed by LPA1 LLC.
501 South 9th Street
Reading, PA 19602 USA
Email: [email protected]
Toll Free: 1.800.704.9058
MADE IN CHINA
  • Page 1 1
  • Page 2 2

Little Partners LPA1002 User manual

Brand
Little Partners
Model
LPA1002
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents