SPYKER KSP12-TD2 Owner's manual

Brand: SPYKER

Model: KSP12-TD2

Category: Car kits

Type: Owner's manual

SPYKER KSP12-TD2 is a top dressing spreader kit. The kit enables the user to apply granular materials like fertilizers, seeds, and ice melt on lawns and turf. It features an enclosed hopper that protects the material from the elements. The spinner mechanism ensures an even spread of the material. The kit is easy to assemble and install on compatible spreaders. With its durable construction and reliable performance, the SPYKER KSP12-TD2 is an excellent choice for lawn care and maintenance.

Page 1 1019577-BEnglish Manual

KIT INSTRUCTIONS

KSP12-TD2 Ride-On Spreader Top Dressing Kit

IMPORTANT:

Please reference your spreader manual for information on the safety

of persons and property. Read it carefully before assembly and operation of equipment!

Closed Hopper

Bearing

Part No. 1001522

Qty. 1

TD Shaft

+ Bevel Gear

Part No. 1019576

Qty. 1

S100-12010

TD Shaft B

Part No. 1019575

Qty. 1

Spinner

Shaft Coupling

Part No. 1000356

Qty. 1

Set Screw

1/4” x 3/8” SS

Part No. 1001251

Qty. 2

3. Remove the

three screws (D)

from the top of the

transmission and lift

off top cover (E).

1. Remove the

agitator (A) and

felt washer (B).

2. From the inside of

the hopper using a

flat head screwdriver,

press bushing (C)

out of hopper

base.

NOTE: Bushing

will remain on shaft.

Parts Assembly

Page 2 1019577-BEnglish Manual

Assembly

4. Remove the shaft (F) and fan (G) by rotating transm-

ission (H) forward while pulling up on the shaft (F).

5. Remove the clip and slide the fan (G) from the

shaft (F). NOTE: Retain fan and fan clip.

6. Installing

the Kit

Slide the

transmission

cover (E) over

the new gear

shaft assembly (5)

as illustrated.

Insert the

assembly (5)

into the transmiss-

ion gear box (H)

and secure the

transmission

cover (E) with the

original retained

screws (D).

7. Slide the

spinner shaft

coupling (3)

on the shaft

assembly (5).

9. FROM BELOW: Find the opening at the center and

base of the hopper. Press the closed hopper bearing (1)

into the hopper base.

8. Affix fan (G) to

the new shaft (2),

securing with the

fan clip (J).

Add the

closed hopper

bearing (1) on

top as illustrated

here.

Page 3 1019577-BEnglish Manual

Assembly / Service

10. Install the base of the shaft (2) in the coupling (3) that

was added on step 7. Secure with the two provided

set screws (4).

SERVICE

QUALITY CONTINUES

WITH QUALITY SERVICE

If you have installation questions, are missing parts or

need replacement parts, don’t go back to the store!

Please find your product serial number and model

number, then contact our Customer Service

department:

In North America and Canada call

Toll-Free: 800-972-6130

Chat online: www.spyker.com

NOTES

Assembly is complete.

Page 4 1019577-BEnglish Manual

1 YEAR LIMITED WARRANTY

This is warranted to the original purchaser only. Spyker will replace parts with defects in

materials and workmanship, for a period of one year from the date of purchase.

Spyker Spreaders will not be liable for any loss, damage or expense including, but not

limited to, consequential or incidental damages, arising from the operation, condition or

use of the item. The sole and exclusive remedy against Spyker Spreaders being the

replacement of the defective parts. This warranty gives you specic legal rights, and you

may also have other rights which vary from state to state.

This express warranty, which is applicable only to the original purchase, is in lieu

of and excludes all other warranties, whether expressed or implied by operation of

law or otherwise, including any warranty of merchantability or tness for particular

purpose.

WARRANTY

SPYKER SPREADERS

Jeffersonville, IN 47130 USA

Phone: 800.972.6130

www.spyker.com

SPYKER KSP12-TD2 Owner's manual

Brand: SPYKER

Model: KSP12-TD2

Category: Car kits

Type: Owner's manual

Download PDF

report

SPYKER KSP12-TD2 Owner's manual

SPYKER KSP12-TD2 Owner's manual

Related papers

Other documents