Kimex 015-1252 User manual

Kimex
Brand
Kimex
Model
015-1252
Category
Flat panel desk mounts
Type
User manual

This manual is also suitable for

Kimex 015-1252 is a dual monitor desk stand compatible with screens sized 13 to 27 inches and weighing up to 10 kilograms each. It offers flexible mounting options, allowing you to choose between using the weighted metal base or attaching it to your desk via a drilled hole. Adjustments can be made using the included Allen key and wrench to find the optimal viewing angles and heights for your monitors. Additionally, the stand includes cable clips to help you keep your workspace organized and free of clutter.

Kimex 015-1252 is a dual monitor desk stand compatible with screens sized 13 to 27 inches and weighing up to 10 kilograms each. It offers flexible mounting options, allowing you to choose between using the weighted metal base or attaching it to your desk via a drilled hole. Adjustments can be made using the included Allen key and wrench to find the optimal viewing angles and heights for your monitors. Additionally, the stand includes cable clips to help you keep your workspace organized and free of clutter.

Support de bureau 2 écrans moniteurs PC 13´´-27´´
2 PC monitors desk stand 13´´-27´´
015-1252
75x75/100x100 27"
MAX
10kg x2
(22lbs)
RATED
MANUEL DE MONTAGE / INSTRUCTION MANUAL
1
(1) Mât 35mm - a
35mm pole
(2)Fixation VESA- c
Monitor Arm
(1) Base - b
Weighted base
(1) Cache plastique - d
Plastic cover
(1) Support - f
Support plate
(1) Vis M10 - e
M10 bolt
(1) Rondelle M10 - g (1) Rondelle - h
M10 washer Spring washer
(2) Passe-câble - i
Wire clip
(3) Vis M6x29 - j
M6x29 bolt
(1) Clé Allen - k
Allen key
(1) Clé- l
Wrench
(4) Cache plastique - p
Spare cover
(8)Cale M4 - o
M4 space
(8)Vis M4x30 - n
M4x30 bolt
(8)Vis M4x12 - m
M4x12 bolt
Contenu du colis
Supplied parts list
Option 1
a
b
d
j
Le support peut être simplement installé sur sa
base en métal fournie (option 1), ou être fixé sur le
bureau (option 2 ou 3). Dans ce cas, percez
simplement un trou de 10mm de diamètre dans le
bureau afin d’y insérer la vis de fixation (e).
Installez la base et le mât
Mounting the base
The stand can be used with the weighted metal
base or there is a desk attachment provided (as
drawings on the bottom) allowing you to mount
the stand on a desk. This is very simple to
install and just requires a hole drilling (10mm
diameter) in your desk and clamping with the bolt
and large washer.
Option 2 Option 3
a
d
a
d
b
j
f
e
g
h
f
e
g
h
5
4
3
2Installez les fixations VESA
Install monitor ARM
Ajustements
Do the necessary adjustment
Fixez l'écran sur les plaques VESA
Mount the monitor to VESA plate
Installez les passe-câbles et organisez les câbles
Install the wire clips & manage the wires
o
n
m
Ecran à dos incurvé
Curved back monitor
Ecran à dos plat
Flat Back monitor
Utilisez la clé Allen (k) si besoin pour
les ajustements.
Use the Allen Key (k) to do the
necessary adjustment of mount.
Utilisez la clé (l) pour serrer l’écrou et
bloquer l’inclinaison.
Use the Wrench (l) to tighten the nut if
the tilt angle can not be fixed.
Installez les fixations VESA sur le mât
à la hauteur désirée. Vissez à l'aide
de la clé Allen (k).
  • Page 1 1
  • Page 2 2
  • Page 3 3

Kimex 015-1252 User manual

Kimex
Brand
Kimex
Model
015-1252
Category
Flat panel desk mounts
Type
User manual
This manual is also suitable for

Kimex 015-1252 is a dual monitor desk stand compatible with screens sized 13 to 27 inches and weighing up to 10 kilograms each. It offers flexible mounting options, allowing you to choose between using the weighted metal base or attaching it to your desk via a drilled hole. Adjustments can be made using the included Allen key and wrench to find the optimal viewing angles and heights for your monitors. Additionally, the stand includes cable clips to help you keep your workspace organized and free of clutter.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents