Niigata seiki DHG-60M User manual

Niigata seiki
Brand
Niigata seiki
Model
DHG-60M
Type
User manual

This manual is also suitable for

Precision Measuring Instrument
Thank you for purchasing the DIGITAL S-LINE HEIGHT GAUGE.
This precision measuring instrument is for use on a surface plate to measure the height of a feature, or to scribe a workpiece.
For safe and proper use, please read this instruction manual before
use and follow the procedures described.
Please keep manual where it is accessible to user for future reference.
Keep this manual with the instrument if transferred or leased to a third party.
For inquiries about this product, please contact the dealer where
purchased, or Niigata Seiki.
PROFESSIONAL
Post · · · · · · · · · · · · · · · · · · · · · ·
Slide · · · · · · · · · · · · · · · · · · · · · ·
Fine Adjust Carriage · · · · ·
Base Reference Surface
· · ·
Fine Adjust Lock Screw
· · ·
Slide Handwheel · · · · · · · · · ·
Slide Clamp · · · · · · · · · · · · · · ·
Battery Cover · · · · · · · · · · · · ·
LCD Display · · · · · · · · · · · · · · ·
[ON/0-ABS] Button · · · · · · · ·
Lock Button · · · · · · · · · · · ·
[PR/SET PR] Button · · · · · ·
Scribe Clamp Screw · · · · · ·
Scribe (w/ Carbide Tip)
· · · ·
Data Output Port · · · · · · · · · ·
Fine Adjust Feed · · · · · · · · · ·
Jaw · · · · · · · · · · · · · · · · · · · · · · · · ·
Scribe Clamp · · · · · · · · · · · · · ·
Base · · · · · · · · · · · · · · · · · · · · · · ·
兟E
,
傘 備䢢
Post
Slide Clamp
Fine Adjust Car.
Base Ref. Surface
䣝䣟䢢
䣝䣟䢢
Scribe w/ Carbide Tip Base
Data Output Port
PARTS ID & FUNCTION
Jaw
Scribe
Clamp
Scribe
Clamp Screw
Use of product other than as described in this manual
may cause accident.
Use only for measuring and scribe work. Do not disassemble or modify.
Disassembly may damage product or cause accident.
For repair, please contact distributor or place of purchase.
Do not write on instrument with electric engraver.
Do not engrave instrument, such as an ID number, with
engraver or electric pen.
Do not clean main body with organic solvents.
It may damage product and affect accuracy.
䷵
䷶
䷷
兟
- RISK OF PERSONAL INJURY OR
PROPERTY DAMAGE if not followed.
-PROHIBITED action.
-REQUIRED step or necessary condition.
SAFETY NOTICES
Please Observe
To prevent harm to yourself or others, and to prevent damage to property,
always follow the procedures marked by the following symbols.
WARNING:
Denotes a prohibition
– You MUST NOT do.
Denotes a requirement
– You MUST do.
SAFETY NOTICES
Indicates risk of personal injury
or property damage if not followed. Remove Battery from gauge when it will not be used for
an extended period.
Scribe tip is sharp; handle with care.
It may cause injury.
Read the manual and follow the directions.
U
se and store only in environment meeting the following
conditions:
Dry and protected from rain, water, and oils.
Protected from direct sunlight.
L
ocation that is not excessively hot.
Not subject strong electric or magnetic fields.
Protected from children and unauthorized users.
Use in places contrary to the above may cause damage to
the product or affect accuracy resulting in accident or injury.
Use for any other purpose may damage or wear the
instrument. Improper use may also cause accident.
Handle with care.
Do not drop or subject instrument to excessive shock.
Do not place under heavy objects. Improper handling
may cause damage or poor accuracy.
Do not scratch instrument surfaces.
Before use, clean the surface plate, Base underside, and
Scribe Measurement Surface with a wipe or soft cloth.
Fine Adjust
Feed Screw
Fine Adj. Lock Scr.
LCD Display
Slide
Handwheel
Slide
Battery Cover
Supports the Slide and Display.
Moves up and down with Display.
For precise control of Slide position.
Measurements are to this surface.
Tighten when using Fine Adjust Feed.
For moving the Slide.
Locks Slide position.
Open to access Battery.
Digital display of measurement.
Power ON/OFF; set measurement to zero.
Disables button operation.
Set and recall the Preset Value.
Tighten to secure the Scribe.
Measurement tip, or to scribe workpiece.
Data Transfer Cable connects here.
Turn for fine adjustment.
Scribe mounts here.
Secures the Scribe.
Supports the Height Gauge.
Battery may leak if unused for a long time.
REL
R
e
e r e a er r a e e a er
er c u er c c e re e.
u era
S u
ȡ Ȣ
ȡ Ȣ.
er R u a er .
er
.
.
.
.
S
a e Scr e
er e Scr e e Scr e a e
fac u a re ace e a . u e
a u f er a a e e Scr e a
Scre ecure.
re
re
S
S
S
S
e e Scr e a Scre a re e e
Scr e.
u er a
PR
PR
ȡ Ȣ
ȡ Ȣ
c u
RS R u
u e ea ure e
ur er .
u e S e a e er u a f r ar u c
e S e e e e u c Scre.
e S e a e a e u ee r
e Scre c ac e Surface a e.
re e R S R u e e ea ure e
e . .
S
e e Scr e e ec e eaure a ae
a ea ure e .
.
arae eaure e
ur er .
u e S e a e er u a f r ar u c
e S e e e e u c Scre .
Se e Scr e e Refere ce Surface a re
e S u e e ea ure e
. .
.
ea ure e ec r urface e ea ure .
era e e u ee
u e S e a e er f r ar u c e S e
e e e u c Scre .
e Scr e ea r e e re a
e e e u c Scre .
ur e e u e e S c re a e f e
a u e e Scr e .
S
e a e ecure
ur a e u e
S e a ee .
Surface a e
e ea ure e Scree
.
.
e u Scree
Re ea e
c
ea . Surface
Ref. Surface
AFTER USE 兟 STORAGE
SPECIFICATIONS
After use, clean measuring surfaces, sliding surfaces, base,
and exterior using a dry cloth and perform rust prevention
treatment.
For rust prevention, lightly apply anti-rust oil.
Remove battery if instrument will not be used for a long period
of time.
10 40
CR2032 lithium battery
DHG-35M
0 350mm
DHG-60M
0 600mm
~7 ~8
0.01mm
5 digit LCD
±0.04mm ±0.05mm
CR2032
lithium battery
for test
Instruction Manual
Battery Tool
Error Condition Corrective Action
傘Error備䢢is displayed on
the LCD.
The Slide was moved too fast;
press the [ON/0-ABS] Button and
retake the measurement.
Model No.
Meas. Range
Resolution
Max. Permissible Error
Display
Mass
Op. Temp. Range
Power
Accessories
䣝䣟䢢
䣝䣟䢢
Jaw
Mounting a Dial Indicator
A dial Indicator (sold separately) can be mounted in place of the
Scribe using an optional Indicator Mounting Arm (also sold
separately.)
䷵On the Indicator Mounting Arm, loosen the Clamp and
insert the Indicator into the mounting hole and secure
by tightening the Clamp.
䷶loosen the Scribe Clamp Screw and remove from the
Jaw.
䷷Insert the Mounting Arm into the Scribe Clamp replace
onto the Jaw. Adjust the amount of overhang, and
tighten the Scribe Clamp Screw to secure.
APPLICATIONS兟FEATURES
Measuring and marking workpieces, ideal for tool and die work.
Handwheel for smooth operation.
Digital display for easy reading.
Zero point can be set at any position.
Preset Value can be set and stored.
Auto-off function (Settable to 8, 120 min., disabled)
Indicator Clamp
Dial Indicator
Cover
Data Transfer Cable
ata Button
Data Output
Connect the optional Data Transfer Cable (DTC-M1) to output
data. To send data, connect the cable and press the Data Button
on the cable.
Connecting the Data Transfer Cable
Using a small screwdriver, remove the Cover and attach the
cable.
Scribe Clamp
Indicator Mounting Arm
Scribe Clamp Screw
Outside Japan,
Please contact distributor or place of purchase to inquire about calibration services.
To maintain instrument accuracy, periodic calibration is recommended.
Calibration interval necessary to maintain accuracy will vary depending on frequency
and conditions of use. Please follow your company's guidelines and calibrate regularly.
Niigata Seiki Co., Ltd.
SERVICE
If Instrument is not working properly, or if you have any
questions, please contact distributor or place of purchase.
Please note, manufacturer is unable to respond to inquires
or provide service directly. Please contact distributor or place
of purchase.
For communication details, please refer to the manual for
the SK-LOG Measuring Instrument Communication
Software , sold separately.
TROUBLESHOOTING
REL
PR
PR
I436-K
URL http://www.niigataseiki.co.jp
  • Page 1 1
  • Page 2 2

Niigata seiki DHG-60M User manual

Niigata seiki
Brand
Niigata seiki
Model
DHG-60M
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents