Zanussi ZOB991X User manual

1

ZOB 991

User

information

Built-in oven

2

3

Thank you for selecting our appliance

We wish you lots of enjoyment with your new appliance and we hope that you will consider our

brand again when purchasing household appliances.

Please read this user manual carefully and keep it throughout the product life cycle as a reference

document. The user manual should be passed on to any future owner of the appliance.

4

Warnings and Important Safety Information - Built-in Oven 5

Description of the appliance 7

Control panel 8

When the appliance is first installed 11

Before using the oven for the first time 12

Programming the Oven 15

Safety and Energy Saving Functions 18

Practical Tips 24

Baking and Roasting Tables 26

Cleaning and Maintenance 28

If something is wrong 33

Technical Data 34

Instructions for the Installer 35

Building In 36

Customer Service 37

Contents

Safety instructions

Step by step instructions

Hints and Tips

Guide to using the user instructions

)

This appliance conforms with the following ECC Directives:

- 2006/95 (Low Voltage Directive);

- 89/336 (EMC Directive);

- 93/68 (General Directive);

and subsequent modifications.

5

Important Safety Information

Always keep these user instructions with the appliance. Should the appliance be passed on

to third persons or sold, or if you leave this appliance behind when you move house, it is

very important that the new user has access to these user instructions and the accompanying

information.

These warnings are provided for the safety of the users and those living with them. So read

them carefully before connecting and/or using the appliance.

Installation

• The installation must be performed by a

qualified person in accordance with the rules

and regulations in force. The individual

operations for installing the appliance are

described under the instructions for the in-

staller.

• Have the appliance installed and connected

by a qualified person with specialist knowl-

edge, who will carry it out in accordance

with the directives.

• If any modifications to the power supply are

required because of the installation, these

should also be carried out by a qualified

electrician.

Operation

• This oven is designed for cooking foodstuffs;

never use it for other purposes.

• When opening the oven door during or at

the end of cooking be careful of the stream

of hot air, which comes out of the oven.

• Be very careful when using the cooker. The

extreme heat of the heating elements makes

the shelves and other parts very hot.

• If you should for whatever reason use alu-

minium foil to cook food in the oven, never

allow it to come into direct contact with the

floor of the oven.

• When cleaning the oven, proceed with care:

never spray anything onto the grease filter

(if fitted), the heating elements and the ther-

mostat sensor.

• If is dangerous to make modifications of any

kind to this appliance or to its specifications.

• During the baking, roasting and grilling pro-

cess, the oven window and the other parts

of the appliance get hot, so children should

be kept away from the appliance. Take care,

if connecting electrical appliances to sock-

ets near the oven, that cables do not come

into contact with hot rings or get caught in

the oven door.

• Always use oven gloves to take hot oven-

proof dishes or pots out of the oven.

• Regular cleaning prevents the surface ma-

terial from deteriorating.

• Before cleaning the oven, either turn the

power off or pull the mains plug out.

• Make sure that the oven is in the “OFF”

position, when the oven is no longer being

used.

• This oven was made as a single appliance

or as a combination appliance with electri-

cal hotplate, depending on the model, for

single-phase connection to 230 V.

• The appliance must not be cleaned with a

superheated steam cleaner or a steam jet

cleaner.

• Do not use abrasive cleaners or sharp metal

scrapers. These can scratch the glass in the

oven door, which may result in the shattering

of the glass.

English

6

Child Safety

• This appliance is intended for use by adults. It

is dangerous to allow children to use it or play

with it.

• Children should be kept away while the oven

is working. Also, after you have switched the

oven off, it remains hot for a long time.

• Children and people, who are not able to

use the appliance safely because of their physi-

cal, sensory or mental capabilities or who do

not have sufficient experience and knowledge,

should not use this appliance without being

supervised or instructed by a responsible

person.

Customer Service

• Have checks and/or repairs carried out by

the manufacturer’s service department or by

a service department authorised by the manu-

facturer and use only original spare parts.

• Do not attempt to repair the appliance yourself

in the event of malfunctions or damage. Re-

pairs carried out by untrained persons may

cause damage or injury.

The symbol

on the product or its packaging

indicates that this product is not to be treated as

normal household waste. Instead it must be handed

over to a collection point for the recycling of electrical

and electronic equipment. The correct disposal of

this product will help to protect the environment and

human health. Environment and health are

endangered by incorrect disposal. For more

detailed information about recycling of this product,

please contact your local town hall, your household

waste disposal service or the shop where you

purchased the product.

7

Description of the appliance

1. Control panel

2. Grill

3. Oven light

4. Hot air fan

5. Rating plate

2

3

1

4

5

Anti-tip shelf

Cake tray

Dripping pan

Oven accessories

Replaceable telescopic

runners

8

Control panel

Cooking functions display

Temperature display

Time display

1 2 5 6 3

4

How the electronic Touch Controls on the oven work

The Touch Control buttons

All the oven functions are controlled electronically. You can select any combination of cooking function,

cooking temperature and automatic timing using the touch controls.

Make sure you touch just one control button at a time. If you touch the cooking function control for a

longer time, the next cooking function will be selected.

The electronic Touch Controls on the oven

1. - “On/Off” TOUCH CONTROL

2.

- Touch Control for cooking functions

3.

- Touch Control for the Fast Heat Up function

4.

- Touch Control to Decrease (Time or Temperature)

5.

- Touch Control to Increase (Time or Temperature)

6.

- Touch Control for the time, Minute Minder, End of cooking time, Cooking duration

time, Time of day

9

In the event of a power failure, the

programmer will keep all the settings (time

of day, programme setting or programme

in operation) for about 3 minutes. If power

is not restored within 3 minutes, all the

settings will be cancelled. When the power

supply is restored again, the numbers in

the display flash. If this happens, the time

of day and timer must be re-set.

Special functions

The following functions can be activated by touch-

ing two controls at the same time:

- Child Safety Function: Touch the controls

and “ ”.

- Beep on control: Touch the controls

and

“ ”.

- Demo mode: Please see the paragraph “Demo

Mode” on page 20.

For further details, see chapter “Safety and En-

ergy Saving Functions”.

10

”On/Off“ Touch Control

The oven must be switched on before setting

cooking functions or other programmes. If you

touch the

control, the oven symbol appears

in the display and the oven light switches itself on

(Fig. 1).

To switch off the oven, touch the

control. All

cooking functions or programmes will stop, the

oven light will switch off and the time display will

show only the time of day.

Fig. 1

11

Fig. 2

When the oven is first installed

When the oven is first connected to the electrical

supply, the display will automatically show 12:00

and the

symbol

will flash.

Set the correct time of day before using the

oven for the first time.

How to set the correct time of day

for the first time:

1. Touch the time function control and, while

the symbol

is flashing, set the correct time

of day by touching the controls

“ ”

or

“ ”

(Fig. 2)

.

The time arrow symbol

will disappear

about 5 seconds after the correct time is

displayed.

2. If the symbol

stops flashing, touch the

time

control

twice.

Then, proceed as described in point 1.

It is possible to set the time of day

only when the oven is switched off.

12

Before using the oven for the first time

Fig. 3

Fig. 4

To open the oven door, always hold the

handle in the centre (Fig. 4).

Remove all packaging, both inside and

outside the oven, before using the oven.

The oven will work only if the time of

day has been set.

Before using for the first time, the oven should be

heated up without food.

During this time, an unpleasant odour may be

emitted. This is absolutely normal. It is caused by

manufacturing residues.

1. Set the time of day with the electronic pro-

grammer (see paragraph “How to set the cor-

rect time of day for the first time”).

2. Switch the oven on using the

control.

3. Touch the

control twice and select the

function “Conventional cooking”

(fig.

3).

4. Use the Touch Control “

” to set the tem-

perature to 250 °C.

5. Now allow the oven to run empty for ap-

proximately 45 minutes.

6. Open a window for ventilation during this time.

This procedure should be repeated with the “Full

Grill”

function and the “Fan Cooking”

function for approximately 5-10 minutes.

Then let the oven cool down. Then

dampen a soft cloth with warm water and

a little mild washing-up liquid and use this

to clean the oven cavity.

Before using for the first time, carefully

wash the oven accessories as well.

13

How to select a Cooking Function

1. Switch the oven on by touching the control.

2. Touch the

control to select the required

oven function. Each time you touch the

control, a cooking function symbol will appear

in the display and the corresponding cooking

function number will appear to the left of the

currently selected cooking function symbol

(Fig. 5).

3. If the pre-set temperature is not suitable, use

the

“ ”

control or

“ ”

control to set the tem-

perature. The temperature is adjusted in 5

degree steps.

- As the oven heats up, the thermometer

symbol

rises slowly, indicating the current

oven temperature.

When the required temperature is reached,

an acoustic alarm will sound for a short time

and the thermometer symbol

will light up

permanently.

Fig. 5

How to set the temperature and

cooking time

It is possible to set the temperature and cooking

time while the oven is working.

1. Touch the

control and then the “ ” or

“ ” control to increase or decrease the pre-

set temperature. The “°” symbol will flash

while you are doing this (Fig. 6).

2. Touch the

time function control and then

the “ ” or “ ” control to increase or

decrease the pre-set cooking time. The

symbol (next to the time display) will flash while

you are doing this.

Fig. 6

14

1

2

5

Cooking Functions

The following list explains all the available cooking

functions in sequence.

3

4

Fan Cooking - This setting allows

you to roast or roast and bake

simultaneously using any shelf, without

flavour transference. Pre-set tempe-

rature: 175°C. Highest temperature:

250°C.

Conventional Cooking - The heat

comes from both the top and bottom

heating elements, ensuring an even

temperature inside the oven. Pre-set

temperature: 200°C. Highest tempe-

rature: 250°C.

Grill - Can be used for grilling smaller

quantities. Pre-set temperature: 250°C.

Temperature range: 200 °C - 250°C.

Thermal Grilling - This is an alterna-

tive method of cooking food items, which

are normally cooked with the normal

grill. The grill element and the oven fan

operate together, circulating hot air

around the food. Pre-set temperature:

180°C.

When using thermal grilling, select

a maximum temperature of 200°C.

Pizza Function - The bottom heating

element provides direct heat to the

base of pizzas, quiches or pies, while

the fan ensures air is circulated to cook

the topping or filling.

Pre-set temperature: 175°C. Highest

temperature: 250°C.

Full Grill - The entire grill element

is switched on. Recommended for

large quantities. Pre-set tempera-

ture: 250 °C. Temperature range:

200°C - 250°C.

Bottom Heating Element - The

heat comes only from the heating

element in the bottom of the oven

only. This setting is very good for

finishing off dishes. Pre-set

temperature: 250°C.

Top Heating Element - The heat

comes only from the heating element

in the top of the oven. This setting is

very good for finishing off dishes.

Pre-set temperature: 250°C.

Defrosting - The oven fan

operates without heat and

circulates the air, at room

temperature, inside the oven. This

function is particularly suitable for

defrosting delicate food which could

be damaged by heat, e.g. cream-

filled gateaux, ice cream cakes,

pastries, bread and other yeast

products.

6

7

8

9

15

Programming the Oven

How to set the minute minder

1. Touch the time function control to select

the Minute Minder function. The relevant symbol

will flash and “0.00” appears in the control

panel (Fig. 7).

2. Touch the “

” control and set the desired

time. Maximum time is 23 hours 59 minutes.

After the setting is carried out, the Minute Minder

starts to run after a few seconds. The symbol

will flash during the programmed time.

3. When the programmed time has elapsed, an

acoustic alarm will be heard.

4. To switch off the acoustic alarm, touch any

control.

The acoustic alarm will switch off

automatically after approximately

one minute and the current time will

be displayed on the control panel.

The oven will NOT switch off if in use.

The Minute Minder function can also

be used when the oven is off.

How to change the Minute Minder setting:

Touch the time function control

until the

symbols

and flash.

It is now possible to change the setting of the minu-

te minder using the “

” or “ ” control.

Fig. 7

How to cancel the Minute Minder:

Touch the time function control until the

symbols

and flash.

Touch the “

” control until “0.00” appears in the

display to re-set the time (Fig. 8).

Fig. 8

16

How to programme the Oven to

switch off

1. Switch the oven on, place food in the oven,

select the desired cooking function and

adjust the cooking temperature, if necessary.

2. Touch the time function control

and select

the Cooking Duration function. The Cooking

Duration symbol

will flash and “0.00”

will appear in the display (Fig. 9).

3. While the

symbol is flashing, set the

desired time using the “

” control.

Maximum time is 23 hours 59 minutes. The

programmer will wait a few seconds and

then start running.

4. When the programmed time has elapsed,

the oven will be switched off automatically.

An acoustic alarm will be heard and “0.00”

will appear on the control panel.

5. To switch off the acoustic alarm, touch the

control.

If you touch any other control, the alarm will

stop and the control panel will display the

symbols indicated in Fig. 10. Then, you need

to reset the programmer display by pressing

the

control.

The acoustic alarm will switch off

automatically after approximately two

minutes. Then touch the

control to

reset the programme.

How to cancel a programmed Cooking

Duration Time:

— Touch the time function control

until the

symbol

flashes.

— Touch the control “

” to decrease the time until

the display shows “0.00” (Fig. 11).

Fig. 9

Fig. 10

Fig. 11

17

How to programme the Oven to switch

on and off

1. Set the Cooking Duration as described in the

relevant section.

2. Touch the time function control

until the

function for the end of the cooking time is selected

and the corresponding symbol

is flashing.

The control panel will display the end of cooking

time (that is, the actual time + cooking duration

time) (Fig. 12).

3. Touch the “

” control to select the desired

end of the cooking time.

Remember that the cooking duration

time as such will not change.

4. After the setting is carried out, the programmer

will wait a few seconds and then start running.

5. The oven will switch on and off automatically.

When it switches itself off, an acoustic alarm will

sound.

6. To switch off the acoustic alarm, touch the

control.

If you touch any other control, the alarm will

stop and the control panel will display the

symbols indicated in Fig. 10. Then, you need

to reset the programmer display by pressing

the

control.

The acoustic alarm will switch off

automatically after approximately two

minutes. Touch the

control to

reset the programme.

If you want to cancel the programme, simply

cancel the Cooking Duration that has been

set (see the relevant section).

Fig. 12

18

Child Lock Function

To av

oid children switching on the oven

accidentally, it is possible to lock the oven controls.

1. Switch the oven off by touching the

control.

2. Touch the controls

and “ ” at the same

time for about 3 seconds. An acoustic signal

will be emitted and the indication “SAFE” will

appear in the display (Fig. 14).

3. The oven is now locked. Neither individual

functions nor temperatures can be selected.

How to unlock the oven:

Touch the controls

and “ ” at the same time

for about 3 seconds. An acoustic signal will be

emitted and the indication ‘SAFE’ will go out. The

oven can now be operated again.

Automatic Cut-Off Function

The oven is supplied with an automatic cut-off

function. If a cooking time has not been set and no

change of setting has been made, the oven will

switch off automatically according to the following

table (Fig. 13).

Temperature setting: Automatic switch off:

250 ° C after 3 hours

200 to 245 °C after 5.5 hours

120 to 195 °C after 8.5 hours

below 120 °C after 12 hours

Fig. 13

Fig. 14

Special and Energy Saving Functions

19

Fast Heat Up Function (Booster)

After a cooking function has been selected and the

temperature has been set, the oven cavity will

gradually heat up until the desired temperature is

reached. This will take from 10 to 15 minutes,

depending on selected function and temperature.

If it is necessary to reach the required temperature

in a shorter time, the fast heat up function can be

used.

1. Switch the oven on by touching the

control.

2. Set the desired cooking function and

temperature as explained in the previous pages.

3. Determine the exact temperature by touching

the controls “

” or “ ”. The temperature will

appear in the display.

4. Touch the

control. The temperature display

will show “FHU” (Fig. 15).

5. Touch the

control. The symbol “

°

” will

flash for approximately 10 seconds. Now it is

possible to select the desired temperature by

touching the controls “

” or “ ”.

6. When the desired temperature is reached, an

acoustic alarm will sound for a short time and

the temperature display will revert to the set

temperature.

This function can be used with any cooking function

or temperature.

Fig. 15

20

Residual Heat Function

When a Cooking Duration time is set, the oven will

automatically switch off a few minutes before the end

of the programmed cooking duration to finish your

dishes in the oven without further energy consump-

tion. All current settings will be displayed until the

Cooking Duration time is over.

This function will not operate when the Cooking

Duration time is less than 15 minutes.

Demo Mode

This mode is intended to be used in shops to

demonstrate the oven functionality without any

power consumption except the interior light, the

display and the fan. This function can only be

switched on when the appliance is first connected.

If there is a power failure, when the power supply

is restored again, the Demo function can only be

switched on if in the display 12:00 and the symbol

are flashing automatically.

1.

Touch the control for approximately 2

seconds.

An acoustic alarm will sound for a

short time.

2.

Touch the

and “ ”controls at the same

time. A short acoustic alarm will be heard

and the time

12:00 will appear in the display

(Fig. 16)

.

When the oven is switched on

the

symbol appears in the display.

This means

that the Demo function is activated.

All oven functions can be selected.

The oven is not really working and the heating

elements do not switch on.

Switch off the oven and follow the procedure

described above to switch off the demo mode

again.

The Demo function remains saved in the

programme in the event of a power failure.

Fig. 16

Page is loading ...

Zanussi ZOB991X User manual

Related papers

Other documents