Scratch and Dent

Titan Scratch and Dent, Barbecue Prep Station Grill Accessory Serving Cart User manual

Hello! I am an AI chatbot trained to assist you with the Titan Scratch and Dent User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Attention:

• Phillips screwdriver is required.

• Please do not fasten all screws before the cart is fully assembled.

• Assemble the cart on a flat, clean surface.

• Retain these instructions for future use.

RUGGED CART

Part List

1. Top Shelf 1pc

2. Top Frame 1pc

3. Handle 2pcs

4. Middle Shelf 1pc

5. Middle Frame 1pc

6. U Shape Leg Frame 2pcs

7. Bottom Bars 5pcs

8. Caster 4pcs

Step 1:

Assemble U shape legs on the

top shelf by using 4pcs screws.

The end of the feet are attached

on the inside of the top shelf.

Step 2:

Assemble the middle frame on

the U shape leg, the legs are

attached to the outside of the

middle frame (see picture in

Step 4)

Step 3:

Assemble bottom bars on the

U shape legs as per the above

drawing.

Step 4:

Assemble two handles on the

top frame.

Step 5:

Assemble 4 casters on the

bottom of the U shape leg.

/

Other documents