Acrosser Technology ANR-DNV3N3-8C 1U Owner's manual

ANR-DNV3N3-8C

User Manual

Acrosser Technology Co., Ltd.

www.acrosser.com

ANR-DNV3N3-8C

Networking 1U Rackmount

• Intel

®

Denverton

®

Atom C3758 SoC

• 8x GbE Copper

• 4x 10GbE Fibber

ANR-DNV3N3-8C

2

Acrosser Technology Co., Ltd.

To read this User Manual on your smart phone, you will have to install an

APP that can read PDF le format rst. Please nd the APP you prefer from

the APP Market.

Ver: 100-002

Date: Aug. 20, 2020

Disclaimer

For the purpose of improving reliability, design and function, the information in this document

is subject to change without prior notice and does not represent a commitment on the part of

Acrosser Technology Co., Ltd.

In no event will Acrosser Technology Co., Ltd. be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use the product or documentation,

even if advised of the possibility of such damages.

Copyright

This document contains proprietary information protected by copyright. All rights are reserved.

No part of this manual may be reproduced by any mechanical, electronic, or other means in

any form without prior written permission of Acrosser Technology Co., Ltd.

Trademarks

The product names appear in this manual are for identication purpose only. The trademarks

and product names or brand names appear in this manual are the property of their respective

owners.

Purpose

This document is intended to provide the information about the features and use of the product.

Audience

The intended audiences are technical personnel, not for general audiences.

ANR-DNV3N3-8C

3www.acrosser.com

Table of Contents

1. System Introduction ...................................................................... 5

1.1. Specications ............................................................................................................. 5

1.2. Package Contents ...................................................................................................... 7

1.3. System Dissection ...................................................................................................... 8

1.3.1. Dimensions ..................................................................................................... 8

1.3.2. Front I/O Panel ................................................................................................ 9

1.3.3. Rear I/O Panel ................................................................................................ 9

2. Components Assembly ............................................................... 10

2.1. HDD Installation........................................................................................................ 10

2.2. NIM Module Insertion ............................................................................................... 14

2.3. Rack Installation ....................................................................................................... 17

3. BIOS Settings ............................................................................... 18

3.1. Main Setup ............................................................................................................... 18

3.2. Advanced Setup ....................................................................................................... 19

3.2.1. W83627DHG Hardware Monitor ................................................................... 20

3.2.2. Serial Port Console Redirection .................................................................... 20

3.2.2.1. Serial Port Console Redirection Settings ....................................... 21

3.2.3. Network Stack Conguration ......................................................................... 21

3.2.4. CSM Conguration ........................................................................................ 22

3.2.5. USB Conguration ........................................................................................ 22

3.3. Platform Conguration .............................................................................................. 23

3.3.1. Processor Conguration ................................................................................ 23

3.3.2. Memory Conguration ................................................................................... 24

3.3.3. South Bridge Chipset Conguration .............................................................. 25

3.3.3.1. South Bridge Chipset Conguration ............................................... 26

3.4. Boot Setup ................................................................................................................ 27

3.5. Security Setup .......................................................................................................... 28

3.6. Save & Exit Setup..................................................................................................... 29

4. Software Installation and Programming Guide ........................ 30

4.1. Introduction ............................................................................................................... 30

4.1.1. Environment .................................................................................................. 30

4.1.2. GPIO ............................................................................................................. 30

4.1.3. Watchdog ...................................................................................................... 30

4.1.4. LAN Bypass Subsystem ................................................................................ 30

4.2. File Descriptions ....................................................................................................... 31

4.2.1. GPIO/Watchdog/LAN Bypass Subsystem..................................................... 31

ANR-DNV3N3-8C

4

Acrosser Technology Co., Ltd.

4.3. API List and Descriptions ......................................................................................... 31

4.3.1. GPIO ............................................................................................................. 31

4.3.2. Watchdog ...................................................................................................... 32

4.3.3. LAN Bypass Subsystem ................................................................................ 32

4.3.4. Notes ............................................................................................................. 34

5. FAQ ............................................................................................... 35

Q 1. Where is the serial number located on my system? ................................................. 35

ANR-DNV3N3-8C

5www.acrosser.com

1. System Introduction

The ANR-DNV3N3-8C networking product is based on Intel Atom

®

C3758 SoC,

powerful enough for SD-WAN or Universal CPE applications.

This product provides a compact but powerful system capability by supporting 8x

GbE copper LANs and 4x 10G ber networks(SFP+). In the system design, 3x 2.5-

inch HDD/SSD and one CFast card slot are available for storage in an 1U rackmount

chassis.

1.1. Specifications

(Specications are subject to change without notice.)

General

Thermal Solution • PWM Smart Cooling Fans

CPU • Intel

®

Denverton

®

C3758 8 cores, 2.1GHz

Memory • 2x U-DIMM DDR4

BIOS • Support Console Re-direction

• Support Bypass Setting

Scenario Normal Bypass

SYS (ON) V

SYS (OFF) V

WDT (Timeout) V

PWR (Lost) Remained prior status

• Support PXE boot from all RJ-45 Coppers

Network Interface

Ethernet (on-board) • 8x GbE, 4 SFP+

• Intel i211, LAN[1: 8]

• SoC embedded SFI x4, SFP+[1:4]

Storage

SATA • 3x SATA socket and 3x 2.5” HDD bay

CFast • 1x CFast socket

ANR-DNV3N3-8C

6

Acrosser Technology Co., Ltd.

I/O

Front Panel • 2x USB 3.0

• 3x SYSTEM LED

• 1x RESET Button

• 1x RJ-45-console

• 8x GbE RJ-45 Copper LAN[1: 8]

• 4x SFP+(10G Fiber)

• 1x Acrosser swappable Exp. NIM.

Rear Panel • 2x Smart Cooling Fan

• 1x Power Switch

• Single ATX 150 or 250W PSU

Internal I/O • 3x SATA3

• 1x PCIe Gen3 (x8 slot, x8 Signal) (For Expansion

module)

• ATX 24-pin Power Input

• ATX 12V 8-pin Power Input

• 1x on board pin header for PIC update

• 1x on-board pin-header for I2C

• 1x on-board pin-header for PMBus

• 2*5 pin 2.54mm for 8-bit GPIO (4-In, 4-Out)

• 1x on-board pin-header for SYSTEM LEDs

Other Features

Watchdog Timer • Software programmable 0~255 Seconds, 0=disable

timer.

Battery • Lithium Battery, 3V 220mAH (CR2032), for RTC

Hardware Monitoring • CPU Voltage

• CPU Temperature

• System Temperature

Security & Mgmt. • Chassis Intrusion Detection (default: Disable)

Software

OS Support • Linux Kernel 4.8 & above, (64-bit)

Mechanical & Environment

Dimension • 440(L) x 400(W) x 44(H) mm

Operating Temperature • 0 ~ 40°C (32 ~ 104°F)

Storage Temperature • -20 ~ 80°C (-4 ~ 176°F)

Relative Humidity • 0 to 90% @40°C, non-condensing

ANR-DNV3N3-8C

7www.acrosser.com

EMC & Safety

Certication • CE, FCC Class A, RoHS 2, cULus

Vibration Test • IEC 60068-2-64, 5~500Hz, 3GRMS

Drop Test • ISTA-2A 2006

1.2. Package Contents

Check if the following items are included in the package.

Item Q’ty

�

ANR-DNV3N3-8C system 1

�

Console Cable (RJ-45 to Serial) 1

�

Rackmount Bracket 2

�

CD with Driver and Manual 1

�

Power Cord 1

�

Screw Pack 1

ANR-DNV3N3-8C

8

Acrosser Technology Co., Ltd.

1.3. System Dissection

1.3.1. Dimensions

(Unit: mm)

440

44 400

ANR-DNV3N3-8C

9www.acrosser.com

1.3.2. Front I/O Panel

• RST

Reset Button

• Console

Console Port (RJ45)

• HDD

HDD Activity Indicator (Yellow)

• PWR

Power Indicator (Green)

• USB 3.0

USB 3.0 Port

• SFP+ 1 ~ 4

SFP+ LAN Port

• LAN 1~8

LAN 1~8 Port

1.3.3. Rear I/O Panel

AC Inlet Power Switch

• AC Inlet

1U Redundant ATX PSU

• Power Switch

Power on/off switch

ANR-DNV3N3-8C

10

Acrosser Technology Co., Ltd.

2. Components Assembly

Please follow the instruction to install the inner modules.

2.1. HDD Installation

Step 1: As shown below, insert the snap bushing into the upper ridge of the bigger

hole..

Step 2: Insert the snap bushing into the bigger hole.

ANR-DNV3N3-8C

11www.acrosser.com

Step 3: Push the snap bushing into the smaller hole.

Insert all four snap bushings.

Step 4: Insert screw into the snap bushing, and fasten to HDD.

ANR-DNV3N3-8C

12

Acrosser Technology Co., Ltd.

Step 5: Fasten the HDD with all 4 screws.

Step 6: Connect HDD with the SATA signal and power cable..

ANR-DNV3N3-8C

13www.acrosser.com

Step 7: Place the HDD bracket inside the chassis and fasten with 4 screws.

ANR-DNV3N3-8C

14

Acrosser Technology Co., Ltd.

2.2. NIM Module Insertion

The products shown in this procedule are used for illustration only, may not reect

the exact outlooks.

Step 1: Remove the screw that lock the dummy cover on Module A slot.

Step 2: Open the dummy cover.

ANR-DNV3N3-8C

15www.acrosser.com

Step 3: Insert your NIM module into the Module A slot. Firmly push it all the way

in.

Step 4: Push the latch left. This will lock the module.

ANR-DNV3N3-8C

16

Acrosser Technology Co., Ltd.

Step 5: Use your ngers to lock back the screw.

Or you may use a screw driver to lock back the screw.

ANR-DNV3N3-8C

17www.acrosser.com

2.3. Rack Installation

Step 1: Secure both left and right 1U mounting ears to the server’s front panel

chassis with your Phillips screwdriver.

ANR-DNV3N3-8C

18

Acrosser Technology Co., Ltd.

3. BIOS Settings

This chapter describes the BIOS menu displays and explains how to perform

common tasks needed to get the system up and running. It also gives detailed

explanation of the elements found in each of the BIOS menus. The following topics

are covered:

• Main Setup

• Advanced Setup

• Chipset Setup

• Boot Setup

• Security Setup

• Save & Exit Setup

Once you enter the Award BIOS™ CMOS Setup Utility, the Main Menu will appear

on the screen. Use the arrow keys to highlight the item and then use the <Pg Up>

<Pg Dn> keys to select the value you want in each item.

3.1. Main Setup

The BIOS setup main menu includes some options. Use the [Up/Down] arrow key to

highlight the option, and then press the [Enter] key to select the item and congure

the functions.

→←: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Main Advanced Platform Configuration Boot Security Save & Exit

BIOS Information

BIOS Vendor

Core Version

Compliancy

Project Name

Release Version

Build Date and Time

Total Memory

Memory Frequency

ME FW Version

System Date

Ststem Time

American Megatrends

4.6.5.3

UEFI 2.3; PI 1.2

DNV3N3

100-001

01/01/2019 11:22:33

4096 MB (DDR3)

1333 MHz

8.0.10.1464

[Tue 01/01/2019]

[11:22:33]

Set the Date. Use Tab to

switch between Date

elements.

Note: Listed at the bottom of the menu are the control keys. If you need any help with the

item elds, you can press <F1> key, and it will display the relevant information.

ANR-DNV3N3-8C

19www.acrosser.com

• System Date

Set the system date.

• System Time

Set the system time.

3.2. Advanced Setup

→←: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Main

Advanced Platform Configuration Boot Security Save & Exit

W83627DHG HW Monitor

Serial Port Console Redirection

Network Stack Configuration

CSM Configuration

NVMe Configuration

USB Configuration

Dsiplay hardware monitor

status.

• W83627DHG HW Monitor

Dsiplay hardware monitor status.

• Serial Port Console Redirection

Console port setting.

• Network Stack Conguration

Network stack setting.

• CSM Conguration

Compatibility Support Module Conguration. Enable/Disable Option ROM execution

settings, etc.

• NVMe Conguration

Set NVMe conguration.

• USB Conguration

Set USB conguration parameters.

ANR-DNV3N3-8C

20

Acrosser Technology Co., Ltd.

3.2.1. W83627DHG Hardware Monitor

→←: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Main

Advanced Platform Configuration Boot Security Save & Exit

Pc Health Status

Smart Fan Function

System temperature

CPU temperature

Fan3 Speed

VCORE

RTC Battery Voltage

Enable or Disable Smart

Fan

[Enable]

: 32'C

: 37'C

: 6000 RPM

: 0.992V

: +3.136V

3.2.2. Serial Port Console Redirection

→←: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Main

Advanced Platform Configuration Boot Security Save & Exit

COM 1

Console Redirection

Console Redirection Settings

The setting specify how

the host computer and

the remote computer will

exchange data.

Both computers should

have the same or

compatiable settings.

[Enable]

Note: Both the console function of RJ45 and micro USB will be disabled if the

Console Redirection is set disabled.

Page is loading ...

Acrosser Technology ANR-DNV3N3-8C 1U Owner's manual

Acrosser Technology ANR-DNV3N3-8C 1U Owner's manual

Related papers

Other documents