Kenwood kac 520 is a stereo power amplifier with a maximum output power of 35 W + 35 W at 1 kHz and 4 ohms. It has a rated output power of 25 W + 25 W at 10% THD, 1 kHz, and 4 ohms, and less than 0.5% THD, 20 Hz - 20 kHz, 4 ohms. The frequency response is -3 dB from 10 Hz to 50 kHz. The input sensitivity is adjustable from 0.1 V to 5.0 V, and the signal-to-noise ratio is 100 dB. The input impedance is 10 kΩ, and the damping factor is more than 100 at 100 Hz. The operating voltage is 14.4 V (11 - 16 V), and the current consumption is 5A
Kenwood kac 520 is a stereo power amplifier with a maximum output power of 35 W + 35 W at 1 kHz and 4 ohms. It has a rated output power of 25 W + 25 W at 10% THD, 1 kHz, and 4 ohms, and less than 0.5% THD, 20 Hz - 20 kHz, 4 ohms. The frequency response is -3 dB from 10 Hz to 50 kHz. The input sensitivity is adjustable from 0.1 V to 5.0 V, and the signal-to-noise ratio is 100 dB. The input impedance is 10 kΩ, and the damping factor is more than 100 at 100 Hz. The operating voltage is 14.4 V (11 - 16 V), and the current consumption is 5A
-
1
-
2
-
3
-
4
-
5
Kenwood kac 520 is a stereo power amplifier with a maximum output power of 35 W + 35 W at 1 kHz and 4 ohms. It has a rated output power of 25 W + 25 W at 10% THD, 1 kHz, and 4 ohms, and less than 0.5% THD, 20 Hz - 20 kHz, 4 ohms. The frequency response is -3 dB from 10 Hz to 50 kHz. The input sensitivity is adjustable from 0.1 V to 5.0 V, and the signal-to-noise ratio is 100 dB. The input impedance is 10 kΩ, and the damping factor is more than 100 at 100 Hz. The operating voltage is 14.4 V (11 - 16 V), and the current consumption is 5A
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI