Contec HDD-2TS-3 Owner's manual

Brand: Contec

Model: HDD-2TS-3

Type: Owner's manual

This manual is also suitable for

HDD-2TS-3 NEW

Contec HDD-2TS-3 is a 3.5 inch SATA hard disk drive with a storage capacity of 2TB. It has a 64MB cache and a transfer velocity of 180Mbit/sec. The drive is designed for use in CONTEC's VPC series FA computers and Solution-ePC custom-made PCs. It is not compatible with RAID function.

The drive comes with a one-year warranty and is not formatted. Please be sure to format the drive before use. Do not turn off the power within 30 seconds after turning on the product power, as this may damage the drive.

Here are some possible use cases for the Contec HDD-2TS-3:

Storing data for personal computers

Here are some possible use cases for the Contec HDD-2TS-3:

Storing data for personal computers

Product Guid

CONTEC CO.

LTD.

3-9-31

Himesato

Nishi

odo

awa-ku

Osaka 555-0025

https://www.contec.com

No part of this document may be copied or reproduced in any form by any means

without prior written consent of CONTEC CO., LTD.

NA07247 (LYXZ651) [04012020] April 2020 Edition

3.5-inch 2TB SATA Hard Disk Drive

HDD-2TS-3

Thank you for purchasing this product. The product you have purchased consists of the

following items.

Check, with the following list, that your package is complete.

If you find any item either missing or damaged, please contact the sales representative you

purchased the product from.

1. About the Product

This product is a hard disk drive in accordance with 3.5-inch SATA standard.

Please use this product in accordance with the procedures described in this document.

This product can be used for the CONTEC’s following models. (Don’t use this product with

any other devices.)

Target Products

This product is the FA computer (VPC series) and custom-made PC (Solution-ePC) which

have a 3.5-inch disk bay.

* The RAID function cannot be used with this product. The HDD-2TS-3R is available for RAID

function specifically.

2. Product Configuration

This product consists of the items listed below.

Check, with the following list, that your package is complete. If you discover damaged or

missing items, contact your retailer.

Product...1 Product Guide...1 Warrant

Certificate...1 Serial Number Label...1

3. Safety Precautions

Understand the following definitions and precautions to use the product safely.

Safety Information

This document provides safety information using the following symbols to prevent

accidents resulting in injury or death and the destruction of equipment and resources.

Understand the meanings of these labels to operate the equipment safely.

DANGER

DANGER indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation

which, if not avoided, could result in death or serious

injury.

CAUTION

CAUTION indicates a potentially hazardous situation

which, if not avoided, may result in minor or moderate

injury or in property damage.

Handling Precautions

WARNING



Do not modify the product. Doing so may cause fire, electric shock.



If smoke or abnormal odor is detected, immediately turn off the PC and peripheral

devices and unplug the power cables.



Never touch this product with wet hands. Doing so can short-circuit the product to

cause fire, electric shock, and/or failure.

CAUTION



Do not use the product in water, oil, chemical solution, organic solvents, or any other

fluid.



Do not use the product in a location exposed to direct sun, outdoors or dust.



Do not use the product in a location exposed to sea breeze, a large amount of corrosive

gases such as Cl2, H2S, NH3, SO2, or NO2.



Do not use the product in the environment with strong static electricity or

electromagnetic waves. It may cause failure.



Do not use this product fully sealed or coated with such as resin.



Take countermeasures beforehand to handle the product and avoid a shock.



Do not touch the connector pin with your hand or put foreign objects into connector

mating part.



This is a precision product. Handle with care when transporting or assembling.



Be sure to turn off the product power before inserting or removing the interface

connector.



CONTEC bears absolutely no responsibility for use if modified drive.



Excessive vibration or impact greater than its specification, if this HDD is subjected to,

might cause a fatal error that is not recoverable.



HDD has a lifetime. The assumed life is, with the conditions under the specified

environment, POH or the designed life, whichever shorter. The lifetime is not guaranteed

but is for reference only.



This product is designed to be plugged only in one orientation. Do not force it to be

plugged in.



No part of this document may be copied or reproduced in any form by any means

without prior written consent of CONTEC CO., LTD.



The contents of this document may be changed in the future without prior notice.



All relevant issues have been considered in the preparation of this document. Should

you notice an omission or any questionable item in this document, please feel free to

notify CONTEC CO., LTD.



Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors

that may appear in this document or for any results of using the product.



This product is not formatted. Please be sure to format before use.



The drive may be damaged if the product power is turned off during initialization after

the powering on the product. Do not turn off the power within 30 seconds after turning

on the product power.

Disclaimers

We shall not be liable for any consequential damages such as losses and lost profits

resulting from the operation of this product. For any reason we shall provide no warranty

for the stored contents on your hard disk.

Disposal

When disposing of the product, follow the disposal procedures stipulated under the

relevant laws and municipal ordinances.

4. Specifications

Item Specifications

Form facto

3.5inch

Host interface SATA II (3.0Gb

Storage capacity Total ca

acit

2,000GB

LBA 3,907,029,168

Transfer velocit

180Mbit/sec *1

RPM class 5,900r

Cache 64MB

ut volta

e +5VDC (±5%) +12VDC (±10%)

Current

consumption

inu

- 1.8 A (Ave.)

Idle 171 mA (Ave.) 225 mA (Ave.)

eratin

308 mA (Ave.) 233 mA (Ave.)

Standb

9 mA (Ave.) 9 mA (Ave.)

Slee

9 mA (Ave.) 9 mA (Ave.)

Environment

Operating Tem

erature 5 - 70°C

Humidit

5 - 95%RH (With no condensation)

Corrosive

ases None

Swept sine vibra-

tion

2Hz to 22Hz: 0.25Gs, Limited displacement

22Hz to 350Hz: 0.50Gs

350Hz to 500Hz: 0.25Gs

Shock 80G or less (2ms)

Non-operating Tem

erature -40 - +70°C

Humidit

5 - 95%RH (With no condensation)

Corrosive

ases None

Swept sine vibra-

tion

5Hz to 22Hz: 3.0Gs

22Hz to 350Hz: 3.0Gs

350Hz to 500Hz: 3.0Gs

Shock 300G or less (2ms)

Power-on hours (POH) 8,760

MTTF 1,000,000

Com

onent Desi

n Life 5

ears

sical dimensions (mm) 101.85(W)×146.99(D)×26.11(H)

Wei

ht 580

*1 It might differs depending on the software or host to be used.

5. Connector Pin Assignment

Pin Signal Pin Signal Pin Signal Pin Signal

S1 GND S2 A+ S3 A- S4 GND

S5 B- S6 B+ S7 GND

P1 V

3.3

P2 V

3.3

P3 V

3.3

P4 GND

P5 GND P6 GND P7 V

P8 V

P9 V

P10 GND P11 DAS P12 GND

P13 V

P14 V

P15 V

*1 POWER NOT CONENECTED

6. Physical Appearance

Contec HDD-2TS-3 Owner's manual

Brand: Contec

Model: HDD-2TS-3

Type: Owner's manual

This manual is also suitable for

HDD-2TS-3 NEW

Here are some possible use cases for the Contec HDD-2TS-3:

Storing data for personal computers

Download PDF

report

Contec HDD-2TS-3 Owner's manual

This manual is also suitable for

Contec HDD-2TS-3 Owner's manual

Related papers

Other documents