Tama HP310LW Speedcobra Double User manual

Brand: Tama

Model: HP310LW Speedcobra Double

Type: User manual

This manual is also suitable for

HP310L Speedcobra Single

Tama HP310LW Speedcobra Double is a professional-grade double bass drum pedal that offers a wide range of features and adjustments to suit the needs of any drummer. With its patented Cobra Coil technology, the HP310LW provides a smooth and responsive feel, while the adjustable beater angle and spring tension allow for a customized playing experience. The pedal's sturdy construction and durable components ensure that it will withstand even the most demanding playing styles.

Key features of the Tama HP310LW Speedcobra Double:

Patented Cobra Coil technology for a smooth and responsive feel

Key features of the Tama HP310LW Speedcobra Double:

Patented Cobra Coil technology for a smooth and responsive feel

Fig. 1 Fig. 2 Fig. 3

SPEED COBRA DRUM PEDALS HP310L / HP310LW

INSTRUCTION MANUAL /

Thank you very much for purchasing TAMA

SPEED COBRA drum pedal. For better

understanding of its features and capabilities,

please read through this manual before use. Store

the manual in a convenient place for future

reference.

This equipment is for playing the drums only.

Do not use it for any other purpose, as there is

a risk of injury to other persons or damage to

property.

Take care to keep the drum pedal out of reach

of small children.

There is a risk of injury if the drum pedal is

used barefoot. Please wear suitable footwear.

There is a risk of soiling or damaging floor

surfaces. We recommend placing the drum set

on carpeting or some other floor covering.

Spring

Beater

Footboard

Rocker cam

Cobra Coil compatible hole

Locknut

Spring adjusting nut

Beater holder

Notes

Loosen the square-head bolt 1 of the beater

holder using a tuning key.

Insert the beater shaft and adjust it to the

desired height. Then tighten the bolt to secure

it. The beater head is designed with two

surfaces, one felt and one nylon, to be used at

the performer’s discretion.

When securing the beater, attach the pedal to

the bass drum and press the footboard so that

the beater surface you have chosen makes

contact with the drumhead. Then tighten the

bolt to secure the beater in the correct

position.

Installing the Beater

The pedal unit is attached to the bass drum.

Loosen the bolt of the hoop clamp and fasten

the clamp to the hoop on the bass drum. After

making sure that it is fastened straight, tighten

the bolt again to secure it.

Attaching the Pedal Unit

Hang the spring on the roller 2 of the rocker

cam.

Adjust the spring tension using the nut on the

lower end. When adjusting the spring, first

loosen the locknut, and then turn the adjusting

nut while pressing down on the locknut as in

Fig. 1~2. Tightening the nut makes the pedal’s

resistance heavier, but the beater’s return time

is correspondingly faster.

In order to prevent the spring from loosening

while playing, the adjusting nut engages the

cap attached to the unit roughly every 1/3 of a

turn. Once the desired tension is reached,

secure it by tightening the locknut as in Fig. 3.

Adjusting the Spring

The angle of the beater can be adjusted along

with the angle of the footboard by loosening

the square-headed bolt 3 on top of the rocker

cam. As the angle of the beater is lowered, the

footboard rises. Once the desired angle is

reached, tighten the bolt firmly to secure it. The

factory set-up position is the surface (A) of the

hexagonal shaft is facing up (see photo.3).

The left side beater of the twin-pedal model

(HP310LW) may be adjusted in the same way.

When a more delicate adjustment is needed,

you can adjust the beater angle independently

of the footboard angle by loosening the bolt 4

below the beater holder. This feature is useful

when you wish the footboard angles of both

the hi-hat stand and the left pedal to match.

Adjusting the Beater Angle

Attach the universal joints at the end of the

connecting rod to the pedals. Make sure that

the square-headed bolts for attaching the

connecting rod are on top and on the drum

side for the left pedal, and on top and on the

near side for the right pedal.

When assembling the connecting rod and

connecting tube, make sure that the widest flat

side of connecting rod is facing up (toward the

square headed bolt on top of the tube) as in

the photo at right. After assembly, adjust the

length as desired and re-tighten the bolts

firmly.

Attaching the Connecting Rod (HP310LW)

The Cobra Coil (CC900S) is a spring that assists

the return of the footboard, allowing smoother

and lighter pedal action.

The Cobra Coil can be installed on HP310L or

HP310LW.

Attaching the Cobra Coil (sold separately)

Photo.1 : HP310L

CC900SPhoto.3

Attaching the Connecting Rod

Hoop clamp

http://www.tama.com/

This manual is current as of August 2014. Because we are always working to improve our products, some features may change without notice.

Part Names/

Photo.2 : HP310LW

Beater holder

Press down

Spring

Loosen

Lock nut

Cap

Adjusting nut

Tighten

Universal joint

Connecting tube

Connecting rod

Footboard

Beater

Rocker cam

Spring

Locknut

Spring adjusting nut

Cobra Coil compatible hole

3 3

(A)

Tama HP310LW Speedcobra Double User manual

Brand: Tama

Model: HP310LW Speedcobra Double

Type: User manual

This manual is also suitable for

HP310L Speedcobra Single

Key features of the Tama HP310LW Speedcobra Double:

Patented Cobra Coil technology for a smooth and responsive feel

Download PDF

report

in other languages

日本語: Tama HP310LW Speedcobra Double ユーザーマニュアル

Tama HP310LW Speedcobra Double User manual

This manual is also suitable for

Tama HP310LW Speedcobra Double User manual

in other languages

Related papers

Other documents