Cary Audio Design SLI-50 Owner's manual

Cary Audio Design
Brand
Cary Audio Design
Model
SLI-50
Category
Musical Equipment
Type
Owner's manual

Cary Audio Design SLI-50

The Cary Audio Design SLI-50 is an integrated stereo amplifier that provides 30 watts of power in triode mode and 50 watts of power in tetrode mode. The SLI-50 uses a push-pull ultralinear amplification circuit and features a number of high-quality components, including 1% metal film resistors, polypropylene capacitors, and EI laminated power and output transformers. It has a frequency response of 19Hz to 23Khz +/- .5db at full power output and a noise and hum level of 82db below rated output. The SLI-50 has a number of features that make it a versatile and easy-to-use amplifier. These features include:

Cary Audio Design SLI-50

The Cary Audio Design SLI-50 is an integrated stereo amplifier that provides 30 watts of power in triode mode and 50 watts of power in tetrode mode. The SLI-50 uses a push-pull ultralinear amplification circuit and features a number of high-quality components, including 1% metal film resistors, polypropylene capacitors, and EI laminated power and output transformers. It has a frequency response of 19Hz to 23Khz +/- .5db at full power output and a noise and hum level of 82db below rated output. The SLI-50 has a number of features that make it a versatile and easy-to-use amplifier. These features include:

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Cary Audio Design SLI-50 Owner's manual

Cary Audio Design
Brand
Cary Audio Design
Model
SLI-50
Category
Musical Equipment
Type
Owner's manual

Cary Audio Design SLI-50

The Cary Audio Design SLI-50 is an integrated stereo amplifier that provides 30 watts of power in triode mode and 50 watts of power in tetrode mode. The SLI-50 uses a push-pull ultralinear amplification circuit and features a number of high-quality components, including 1% metal film resistors, polypropylene capacitors, and EI laminated power and output transformers. It has a frequency response of 19Hz to 23Khz +/- .5db at full power output and a noise and hum level of 82db below rated output. The SLI-50 has a number of features that make it a versatile and easy-to-use amplifier. These features include:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents