MEMUP SlidePad Elite 9708 Operating instructions

Category
Supplementary music equipment
Type
Operating instructions

This manual is also suitable for

CONTENT
SAFETY AND OTHER INSTRUCTIONS 1
PRODUCT VIEW 2
ANDROID APPLICATIONS 3
FIRST STEPS 4
ANDROID
TM
INTERFACE 6
COMPUTER CONNECTION 9
CONNECT TO TV 9
OTHER CONNECTIONS 10
WIFI CONNECTION 11
PHOTO GALLERY 12
USING CAMCORDER 13
MOVIE CLIPS 13
PLAY MUSIC 14
PLAY VIDEO 15
SET EMAIL ACCOUNT 16
MANAGING APPLICATIONS 17
WEB BROWSING 18
SETTINGS 19
OPERA MARKET 21
SPECIFICATIONS 22
SAFETY NOTICES 23
LEGAL AND TRADEMARK NOTICES 24
TROUBLESHOOTING 25
- 1 -
Welcome and thank you for choosing SlidePad. Our tab is a multimedia computer running Android
TM
, with a
built-in flash memory, you will then enjoy multimedia content, some applications and access to the Internet
connected to the Wifi.
SAFETY AND OTHER INSTRUCTIONS
Please use SlidePad carefully and read following instructions.
>>> Copyright
Software, audio, video or any intellectual
properties are protected by copyright and
international laws.
It is user’s responsibility when reproducing or
distributing content(s).
>>> Codec Check
This product may not support some media formats.
Please check available codec types.
>>> Data Backup
Please backup datas stored in this product in a
safe place. We are not responsible for any data
loss or damage.
>>> Drop / Shock
Do not give shock or drop the SlidePad. This may
damage it.
>>> Foreign Substance
Do not insert any metal or inflammable foreign
substances into player. This may damage it.
>>> Disassembly / Modification
Do not attempt to disassemble or modify any part
of SlidePad. This may damage it.
Any product modification may void the warranty.
>>> Load
Do not place any heavy object on the top of the
SlidePad. This may damage it.
>>> Chemicals
Do not clean product using chemicals cleaners.
This may damage the SlidePad.
>>> Water / Moisture
Do not contact the SlidePad with water or liquid.
This may cause fire or electric shock. If any
conductive liquid enters, turn off the SlidePad and
disconnect power adapter immediately.
>>> Magnet or Magnetic Properties
Do not place the SlidePad near a magnetic field.
This may cause a malfunction or damage stored
data.
>>> Heat
Do not place the SlidePad under direct sunlight or
near a heat source. Do not keep it for long time in
high temperature. This may damage it.
>>> Vision / Hearing
Do not watch movies or hear loud sound for long
time. This may cause vision or hearing problem.
>>> Fire
During SlidePad
use, if you detect smoke or
unusual smell, turn off product, disconnect adapter
immediately, and call the aftersales department if
required.
>>> Power
Do not use many electronic products with single
outlet.
Firmly insert power plug. When working, do not
unplug.
>>> Glass breakage
The SlidePad
touch screen panel can be
damaged. Any glass breakage isn’t included in the
warranty.
- 2 -
PRODUCT VIEW
The buttons locations depend on the SlidePad you have.
- 3 -
ANDROID APPLICATIONS
Make sure you are connected to the Network when downloading applications (check Wifi connection).
Download and install applications
Download platforms: You have access to a few download platforms that already exist to easily get Android applications.
For example: SlideMe, AndAppStore, Opera, …
These platforms are built-in applications to access directly to a market where you can download free or paid applications.
The new SlidePad are delivered with Opera to easily download applications.
Applications access: Beyond the Internet access, make sure you agree with the different demands to be authorized
when you download and install a software from a download platform.
The software will ask to access for example personal datas, your profile,
Applications format: You can also download directly from a few websites some applications, with apk extension and then
paste file to install it. Make sure you have authorized installation from unknown source before installation.
Remove applications
1/ Tap the Settings shortcut in the Home Screen to display setting menus.
2/ Select “Applications”.
3/ Tab on the application that you want to uninstall.
4/ Tab on “Uninstall” to uninstall the application.
Uninstall to save space or because applications are not satisfying. The file will be deleted permanently and you’ll have to
download and install it again if you want to use it one more time.
Name Definition
Screen LCD
Camera Camera
Audio in Connect to headphones
Speakers Stereo speakers.
Vol + Press to increase the volume level.
Vol - Press to decrease the volume level.
Power on/off Press to turn the unit on, or to turn the screen on and off.
USB in Connect to a PC. Connect the adapter to plug external HDD or USB key
HDMI out Connect to a HD TV (Except SlidePad 704CE)
AC in Charge and power the SlidePad with the included power adapter.
Micro SD slot Load external microSD memory card here.
Reset hole
Press to reset the SlidePad if it freezes or behaves abnormally (use a paperclip or other small
object to press this key.)
- 4 -
FIRST STEPS
Package contents
Please make sure that the items shown below are included in the package.
- Memup Internet SlidePad
- USB cable
- USB host adapter
- Stereo Earphones
- Power adapter
Features
- Browse the Web.
- Check your e-mail. Keep in touch with friends and family
- Watch videos
- Discover thousands of apps for Android™ download apps
- Connect to the Internet wirelessly High-speed Wifi 802.11 b/g/n networking
- HDMI™ output to your TV ** Enjoy videos, photos and more in the comfort of your living room (Except SlidePad
704CE)
- Enjoy your media library anywhere. SlidePad plays popular music, video, and photo formats
- MicroSD memory card reader Increase your storage capacity (up to 64 GB)
- Built-in front-facing camera
** Requires optional HDMI cable (Type A-to-Type C). 1080p HD video playback requires a video file encoded at 1080p. Streaming video quality
will be affected by the source, and the quality and condition of your network connection.
Touchscreen
Use your finger tip to touch the area of the screen where a control icon is displayed. If you touch and hold the screen, it will
register as a continuous button press.
To avoid damaging the screen, do not touch it with excessive force or with any object other than your finger. For best
response, make sure your hands are clean before using the touchscreen controls.
Protective film
A thin film has been applied to the touchscreen to protect it during shipping. It could be removed.
Battery charge
Only use the SlidePad included AC adapter, don’t use other plug to charge the SlidePad, it could damage it. the Status
Indicator will light green when the battery is fully charged
.
The orientation sensor
The SlidePad contains a sensor that will automatically change the orientation of most screens as you rotate the SlidePad.
The orientation sensor can be turned on and off in the Display settings menu.
- 5 -
Touchscreen Actions
To control the SlidePad with the touchscreen, use your finger to manipulate icons, buttons, menu items, the
onscreen keyboard, and other items displayed on the screen. You can perform the following actions on the
touchscreen using your fingertip.
Touch: To activate an on-screen item (application icons, buttons, menu items, and the letter/symbols of the
on-screen keyboard), simply touch them on-screen.
Touch and hold: Some on-screen items have an alternate action if you touch and hold it (opening an
alternate menu, or draging icons). Touch the item and do not lift your fngertip until the action occurs.
Drag: Drag an on-screen item to change its position.Touch and hold it for a moment, then without lifting
your finger, move until the item reaches its target destination.
Swipe: Swipe up/down on the screen to scroll through a list. On some screens, you may be able to swipe
left/right. Touch screen and then quickly move your fingertip across the screen without lifting your finger.
Double tap: Quickly tap the screen twice on a webpage or other application screen to zoom (when
supported).
Inserting a memory card
The SlidePad accepts microSD memory cards to:
- Increase the memory capacity of your SlidePad
- Play media fles stored on the memory card (music video, or photo fles).
To insert a memory card:
1. Align the memory card with the card slot. The metal contacts of the memory card should face down away
from the LCD screen.
2. Slide the card into the spring-loaded slot. Push the card in until it clicks into place.
Note:
Do not attempt to insert objects other than a microSD memory card into the card slot. A compatible memory
card should easily fit into the slot, if you encounter resistance, check the alignment of the card. Do not force
the card in and avoid touching the gold connector of the microSD.
To avoid damage and data corruption, do not remove a memory card while data is being written or read
from the card.
- 6 -
ANDROID
TM
INTERFACE
Getting started
To turn the SlidePad on:
Press and hold the Power key until the LCD screen turns on. Wait until the Home screen appears; the
SlidePad is now ready for use.
To turn the SlidePad off:
1. Press and hold the Power key until a confrmation message appears.
2. Touch OK to turn off the SlidePad.
Stand by
When the SlidePad is on, you can turn off the screen to save battery power.
Simply press the Power key once to turn the screen off. Press it again to turn the screen back on.
Note:
To save battery power, the screen can be set to turn off automatically when the SlidePad is not used
(between 15 s and 30 mn). This option is available in the Display settings menu.
Unlock the screen
When the screen turns off, you will have to unlock the screen when you turn it on. To unlock the screen,
drag the lock icon across the screen towards the lock icon.
If a password has been set, enter it to finish unlock.
The Screen Unlock password can be set in the Location and security settings menu.
- 7 -
The welcome page
The interface is made of 5 virtual pages, each page could be customized with your own selected
applications, move your finger on screen from right to left to use different applications/page.
In these pages, you can add shortcuts, widgets, bookmarks, to ease your SlidePad navigation and use.
You can add or remove from the 5 pages the different widgets or applications you want to customize in your
SlidePads, these are only shortcuts, it won’t affect their installation. Uninstalling a program is different.
You can also add widget to display application with a larger display, programs are used and automatically
refreshed by Internet access when selected and available.
It can be moved or deleted easily. Long press in empty space to add a new widget. You can also check into
the applications shortcut to add a widget.
Note:
Some applications request Internet access to be used.
Name Definition
1
Return Get back to previous screen or cancel action
2
Home Shortcut to the welcome screen
3
Multi tasks
It will display all opened applications to navigate from one to the other
4
Google search Shortcut to reach Google search by connecting the Internet
5
Application
folder
On the right side, you access the different applications installed in your
SlidePad, long press on icon to move it to one of the 5 different pages.
Note: You can swipe left and right to view additional screens.
6
Time
It displays current time
7
Wifi connection It displays the wifi signal
8
Battery status
Shows the battery level before recharging the SlidePad
9
Notification bar
It’s the right part of the bar, move this bar from bottom to top to open it and
check the different actities on the SlidePad such as installed softwares,
download failure, wifi status, notifications, battery status, ...
- 8 -
Preinstalled applications:
Some applications have been installed in your SlidePad for your convenience. These applications include:
Alternative market to download
thousand of applications.
Office Suite Viewer to open and
create
your office files, compatible
with .doc, .xls, .ppt,...
EsFile Explorer is files browser.
Check news updated all day long.
Search and find your favorite titles
Protect your tablet
You can also download and install additional applications from other sources. The SlidePad must be set to
allow installation of applications from non-Market sources. The Unknown sources option can be set in the
Application settings menu.
Support for third-party applications is provided by their respective applications developers.
Memup is not responsible for the behavior of these applications please review the description and terms of
use provided by third-party developers carefully before installing applications on your SlidePad.
- 9 -
COMPUTER CONNECTION
Add some files: Video, Photos, Audio, Documents or applications into the SlidePad by connecting it to your
computer through the delivered USB cable.
Connection
Connect the SlidePad to a computer to transfer files.
1. Connect your SlidePad to the computer. With the included USB cable.
- Plug the small end of the cable into the USB 2.0 Hi- speed connector of the SlidePad.
- Plug the large end of the cable into an available USB 2.0 Hi-speed port on the computer.
2. When your SlidePad is connected, a USB icon will appear in the Notification bar.
Your SlidePad will be recognized by the computer as a Removable Storage drive. Drag and drop files
between your SlidePad and the computer.
Transfer files
To transfer files, open the explorer and drag and drop files from a device to another.
Once finished, remove the USB device safely by clicking the USB icon to stop it and then pull out the USB
cable.
Note:
Please don’t power off when SlidePad is reading and writing.
CONNECT TO TV
Connect to a TV to enjoy your SlidePad from the comfort of your living room. An HDMI cable (Type
A-to-Type C) is required to connect the SlidePad to a TV.
To adjust the display settings:
1/ Open the Settings menu, select HDMI to turn on HDMI output and choose an HDMI resolution option;
2/ Turn on the digital television, and switch its Source mode to HDMI.
3/ Connect the device to the digital television through HDMI cable.
4/ Once the connection is built, the display of the device will turn black, and simultaneously the digital TV
shows what should be displayed on the device screen;
5/ To switch the display back to the tablet, just disconnect the HDMI connection.
- 10 -
OTHER CONNECTIONS
Connecting earphones
Connect a pair of earphones (included) to the SlidePad to enjoy media in private. The headphones must
have a 3.5 mm (1/8 inch) plug. When headphones are connected; speaker output will be disabled
automatically.
Note:
Hearing experts advise against the constant use of personal stereos played at high volume. Constant
exposure to high volumes can lead to hearing loss. If you should experience ringing in the ears or hearing
loss, discontinue use and seek medical advice.
Connecting a Keyboard
When you want to type for an extended period of time, you may want to connect a full-size keyboard to the
SlidePad.
Use the included USB full-size adapter (included) to connect a keyboard to the SlidePad.
Note:
You may also use this connection to add a mouse to the SlidePad.
The adapter supports one connection at a time. To use a keyboard and mouse simultaneously, you will
need an external USB hub.
Connecting a Storage Device
Use the included USB full-size (Type A) adapter (included) to connect a flash memory to the SlidePad.
Note:
This connection supports a maximum storage size of 4 GB. For additional storage capacity, a microSD
card can be added to the SlidePad.
- 11 -
WIFI CONNECTION
Before using an application that requires Internet connection, make sure your Wifi connection is opened.
You have to be under a Wifi zone that will allow your connection.
SlidePad can use Wifi data networks to connect to the Internet over 300 feet; however, this distance can be
affected by your surrounding environment and Wifi router.
When connected to the Wifi, the battery power will be empty faster due to resources use.
Requirements
In order to connect to the Internet, you will need the following:
1. A wireless router or access point with a broad-band Internet connection that supports Wifi 802.11b/g/n
connections.
2. The wireless router network settings
You need to know the name of your network (SSID and the password or other credentials if your network is
secured. These settings can be found on the administration webpage of your wireless router. Please refer
to your wireless router’s documentation for help or ask your network administrator for details.
Connect to a Wifi network
The Notification bar displays icons that indicate your SlidePad’s Wifi status.
Notification that an open Wifi network is in range.
Connected to a Wifi network (waves indicate connection strength).
No icon There are no Wifi networks in range, or the Wifi is off.
To turn on Wifi:
a. Go to the Settings
.
b. Open the Wireless & networks menu: Wi-Fi.
c. Choose on right side the Wi-Fi network you want to connect on.
d. Input password corresponding to chosen network.
Note:
If you connect to a network you connected previously, the SlidePad will reconnect to it automatically.
If you don’t see your network in the list, you can force the SlidePad to re-scan.
- 12 -
PHOTO GALLERY
1/ Photos should be listed in thumbnail. You can slide your finger on the screen left or right to browse
photos.
2/ Tap a photo thumbnail to view the photo in full screen.
3/ To display the previous/next picture, slide your finger on the screen horizontally.
4/ To zoom in or out the picture, pinch your finger on the picture.
Display Menu
When you are viewing the picture, you can tap on the screen or the Menu icon to show a menu.
- 13 -
USING CAMCORDER
Tap the Camera in the apps page.
1/ To start making video clips, tap on the Start/Stop button
to start video recording.
2/ Tap on the Start/Stop button
again to stop video recording or photographing.
3/ The video clip / photo can be previewed in the Preview Window.
4/ To play the video, enter Video Player, and then tap the video.
5/ To view the photo, enter Photo Viewer mode, and then tap the photo.
MOVIE CLIPS
You can make some interesting movie clips with Movie Studio application. Tap the Movie Studio icon on the apps
screen to run this application.
1/ Create new project. Use the virtual keyboard to name a new project.
2/ Tap on “+Add” button to open a new project.
3/ Once you have added photos or video, you can also add background music for it.
4/ Once you finished the movie, you can export it to the folder Movie in the device.
Preview window
VCR mode
Start/Stop
Viewfinder
Photography mode
Zoom
Settings
- 14 -
PLAY MUSIC
Music Library
You should enter the music library once you start the music player. The Music
Library shows your music files sorted by categories (Artist, Album, etc.) if your
music files contain these song information tags.
You can drag your finger up and down on the file list to scroll through it.
Tap a song to play.
Artist
List music files by artist.
Album
List music files by album.
Songs
List all music files.
Playlists
List your favorite songs.
Now Playing
Go to the Now Playing screen.
Playback menu
During playback of a music file, tap on the MENU icon to bring up a context menu:
Playlist
The playlist is a list of songs that you have added manually.
To add the current track to a playlist, tap
during playback, select “Add to playlist” and then choose a
playlist or tap “new” to create a new playlist.
To start a playlist,
In the Music menu, tap the Playlist icon
to display all the playlist. All songs are listed.
Tap a song to start playing.
Libraryreturn to music library menu.
Party Shuffle select Party Shuffle mode.
Add to playlistadd a song to the playlist.
Deletedelete a song.
Sound EffectsSet the sound effects for the music playback.
- 15 -
PLAY VIDEO
Navigate through Video Files
You should see the video list when you enter the video player.
You can drag your finger up and down on the video list to scroll the video list up and down.
Tap a video to start playing.
Playback Screen
Note: Some video files may not be played correctly with the device. Refer to the Technical Specifications at
the end of the manual, and make sure the video resolution, encoding format or file type is supported.
Video Playback Settings
Tap on the icon to display the video settings.
Delete Bookmark and Play from
beginning
Delete bookmark and play from beginning.
Delete Bookmark
Delete the video bookmark.
Play Mode
Single Plays current video and then stops after playing.
Repeat One Repeat the current video.
Repeat All Repeat all videos.
Help
Get instructions on playing video.
Return
Exit from the menu.
- 16 -
SET UP EMAIL ACCOUNT
This device has an E-mail application pre-installed. You can send or receive e-mails from the Internet at
any time. Make sure you have an Internet connection before using the email service.
In the Home Screen, tap the Applications shortcut to display all applications and then tap the Email icon to
launch the e-mail application.
First you need to setup an E-mail account for receiving or sending emails.
1/ Start up the email application by tapping the Email application icon and you are prompted to setup an
account.
2/ Input your email address and login password. You can set the account as default by selecting the option
“Send email from this account by default”.
3/ Tap “Manual Setup” to set the email server information.
4/ Choose the server type from POP3, IMAP or Exchange for incoming emails. To know what type of your
email server is, you can consult the service provider, network administrator or search for information in the
Internet.
5/ Input required information (server, port etc.). You can obtain the information from the service provider,
network administrator or the Internet.
6/ Choose the server type for outgoing emails, and input required server information.
7/ Click “Next” to continue. The SlidePad will check the server settings. When it prompts you that “Your
account is set up, and email is on its way”, your account is set up successfully.
8/ Input your name and then tap on “Done” to finish.
Note: If you have more than one account, every time when you start up the email application, you enter the
default email account.
Manage Accounts
You can setup more than one account and manage these accounts by checking information about the
account, adding another account or deleting an account.
Following these steps to add another account if you want.
Add another Account
1/ Launch the email application and then tap on the Menu icon to display the menu item. Choose
“Accounts” to display accounts.
2/ Tap on the Menu icon
to display the menu item, and then choose “Add account”.
3/ Follow the steps of setting up a Email Account to add an account.
1/ When you are in the email box, tap on the Menu icon
Delete an Email Account
to display the menu items.
2/ Tap on “Accounts” to display all email accounts.
3/ Hold your tap on the account that you want to delete until a menu pop up.
4/ Tap on “Remove Account”, and then tap on “OK” to confirm.
1/ When you are in the email box, tap on the Menu icon
Check the Account Setting
to display the menu items.
2/ Tap on “Accounts” to display all email accounts.
3/ Hold your tap on the account that you want to check until a menu pop up.
4/ Tap “Account settings”and then you should see all setting information about the account. You can edit
these settings as you want.
- 17 -
View Emails
You should enter your mailbox when you start up the email application.
In the mailbox, you can slide your finger up and down to scroll through the email list.
Tap on an email to open it.
Hold on the email can display a menu. With the menu, you can open, reply, forward or delete the email.
Email Menu Items
Tap on the Menu icon to display the menu.
Refresh
Refresh the emails.
Compose
Compose a new email.
Folders
Go back to email box.
Accounts
View all email accounts.
Account Settings
Check your account settings.
MANAGING APPLICATIONS
There are number of useful apps pre-installed in the device as it is produced at the factory, and you can
copy some from other resources, download or purchase them over the internet.
Download or Purchase Applications
With your device, you can visit an apps store or E-market website (e.g. Opera) that provides you plenty of
free apps to download. For those apps that are not free, you will have to pay if you want to have them.
Install Applications
You can install applications following these steps:
1/ Open the Explorer application, then find the app you want to install.
2/ Tap the app you want to install to start installation. However, for the sake of security, the device may
prompt you that there is possibility of attack risk if you install and run some apps whose sources are not
guaranteed. In this case, you shall turn to the Settings menu and select Security to check the “Unknown
sources” before you go on with the installation.
3/ Once the installation is completed, you can find the icon of the app in the apps screen. It is ready for use.
Uninstall Applications
1/ Tap the Settings shortcut in the Home Screen to display setting menus.
2/ Select “Apps”.
3/ Tab on the application that you want to uninstall.
4/ Tab on “Uninstall” to uninstall the application.
5/ You can simply tap and hold on an app icon to jump to the Home Screen, then drag it to the dustbin icon
to uninstall it.
Note:
You cannot uninstall the pre-installed applications, but you can deactivate or stop them.
Make sure all apps you have copied or downloaded to your SlidePad are in.apk format.
Some applications developed for Android mobile might not run properly in the device. Please consult
the respective software developer for further information.
- 18 -
WEB BROWSING
The Browser application lets you visit webpages. Keep up with news, your friends or enjoy video.
To use Browser, the SlidePad must be connected to the Internet. Read the section Wifi connection to
learn how to connect to the Internet.
To open Browser, touch the Browser icon
on the Home screen or in the Launcher.
Name
Description
1
Address bar
Touch the bar to enter a new address or to search into the web.
2
Bookmark
icon
Touch the Bookmark icon to add or view bookmarks, to view your most visited
sites, or to view your browser history.
To go to a webpage
1. Touch the Address bar at the top of the Browser screen. The keyboard will open automatically.
2. Use the keyboard to enter the address (URL) of the webpage.
3. Touch Goto open the webpage.
To bookmark a webpage
Bookmark your favorite webpages in order to visit them faster.
1. Go to the web-page that you want to bookmark
2. Touch the Bookmark icon located on the right of the Address bar.
3. Touch the Add title.
You can modify the name of the bookmark or its location (URL address).
To go to a bookmarked webpage
1. Touch the Book-mark icon to the right of the Address bar.
2. Touch a bookmark tile to open it.
To open a new browser window
1. Press the Menu key to show the Browser options .
2. Touch New Window to open a new browser window.
To switch between browser windows
1. Press the Menu key to show the Browser options.
2. Touch Windows to show a list of open browser windows.
3. Touch the name of a window to switch to it, or touch the “x” to close the window.
2
1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

MEMUP SlidePad Elite 9708 Operating instructions

Category
Supplementary music equipment
Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI