2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical supplies
  5. Electrical wallplates
  6. Keating
  7. Pre 2000

Keating Pre 2000, pre 2000 series User manual

  • Hello! I am an AI chatbot trained to assist you with the Keating Pre 2000 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
OCT’97
BEthermCal
THERMOSTAT CALIBRATION INSTRUCTIONS
(pre 2000 series Gas Fryers)
SERVICE INSTRUCTIONS
www.keatingofchicago.com 1-800-KEATING
You will need:
One standard flat blade screwdriver
One accurate fryer thermometer
1. Set thermostat to desired frying temperature.
2. Allow fryer to cycle three times.
3. Place an accurate thermometer in the oil.
NOTE: Locate thermometer in same position for every calibration.
Position next to far right heat tube is recommended.
Thermometer in oil
4. If calibration of fryer is found to be less than 15°F off, simply
loosen three dial plate retaining screws, rotate dial plate to
match thermometer reading and tighten screws.
Thermostat calibration
If the fryer is found to be more than 15° off, than a qualified service
company must be contacted to have the fryer properly calibrated.
/