Cadillac ESCALADE EXT 2008 Owner's manual

Seats and Restraint Systems

........................... 1-1

Front Seats

............................................... 1-2

Rear Seats

.............................................. 1-10

Safety Belts

............................................. 1-12

Child Restraints

....................................... 1-32

Airbag System

......................................... 1-56

Restraint System Check

............................ 1-72

Features and Controls

..................................... 2-1

Keys

........................................................ 2-3

Doors and Locks

...................................... 2-10

Windows

................................................. 2-24

Theft-Deterrent Systems

............................ 2-26

Starting and Operating Your Vehicle

........... 2-30

Mirrors

.................................................... 2-46

Object Detection Systems

.......................... 2-54

OnStar

®

System

...................................... 2-56

Universal Home Remote System

................ 2-60

Storage Areas

......................................... 2-67

Sunroof

.................................................. 2-87

Instrument Panel

............................................. 3-1

Instrument Panel Overview

.......................... 3-4

Climate Controls

...................................... 3-24

Warning Lights, Gages, and Indicators

........ 3-29

Driver Information Center (DIC)

.................. 3-45

Audio System(s)

....................................... 3-66

Driving Your Vehicle

....................................... 4-1

Your Driving, the Road, and Your Vehicle

..... 4-2

Towing

................................................... 4-42

Service and Appearance Care

.......................... 5-1

Service

..................................................... 5-3

Fuel

......................................................... 5-5

Checking Things Under the Hood

............... 5-10

All-Wheel Drive

........................................ 5-45

Rear Axle

............................................... 5-46

Front Axle

............................................... 5-47

Headlamp Aiming

..................................... 5-48

Bulb Replacement

.................................... 5-51

Windshield Wiper Blade Replacement

......... 5-53

Tires

...................................................... 5-54

Appearance Care

..................................... 5-97

Vehicle Identiﬁcation

............................... 5-106

Electrical System

.................................... 5-107

Capacities and Speciﬁcations

................... 5-115

Maintenance Schedule

..................................... 6-1

Maintenance Schedule

................................ 6-2

Customer Assistance Information

.................... 7-1

Customer Assistance and Information

........... 7-2

Reporting Safety Defects

........................... 7-14

Vehicle Data Recording and Privacy

........... 7-16

Index

................................................................ 1

2008 Cadillac Escalade EXT Owner Manual M

GENERAL MOTORS, GM, the GM Emblem, CADILLAC,

the CADILLAC Crest & Wreath, and the names

ESCALADE and EXT are registered trademarks of

General Motors Corporation.

This manual includes the latest information at the time it

was printed. We reserve the right to make changes

after that time without notice. For vehicles ﬁrst sold in

Canada, substitute the name “General Motors of Canada

Limited” for Cadillac Motor Car Division whenever it

appears in this manual.

This manual describes features that may be available in

this model, but your vehicle may not have all of them.

For example, more than one entertainment system may

be offered or your vehicle may have been ordered

without a front passenger or rear seats.

Keep this manual in the vehicle for quick reference.

Canadian Owners

A French language copy of this manual can be obtained

from your dealer/retailer or from:

Helm, Incorporated

P.O. Box 07130

Detroit, MI 48207

1-800-551-4123

www.helminc.com

Propriétaires Canadiens

On peut obtenir un exemplaire de ce guide en français

auprès de concessionnaire ou à l’adresse suivante:

Helm Incorporated

P.O. Box 07130

Detroit, MI 48207

1-800-551-4123

www.helminc.com

Litho in U.S.A.

Part No. 15854810 A First Printing

©

ii

Using this Manual

Many people read the owner manual from beginning

to end when they ﬁrst receive their new vehicle to

learn about the vehicle’s features and controls.

Pictures and words work together to explain things.

Index

A good place to quickly locate information about

the vehicle is the Index in the back of the manual.

It is an alphabetical list of what is in the manual

and the page number where it can be found.

Safety Warnings and Symbols

There are a number of safety cautions in this book.

A box with the word CAUTION is used to tell about

things that could hurt you or others if you were to

ignore the warning.

{CAUTION:

These mean there is something that could hurt

you or other people.

We tell you what the hazard is and what to do to help

avoid or reduce the hazard. Please read these cautions.

If you do not, you or others could be hurt.

A circle with a slash

through it is a safety

symbol which means

“Do Not,” “Do Not do

this” or “Do Not let

this happen.”

iii

Vehicle Damage Warnings

You will also ﬁnd notices in this manual.

Notice: These mean there is something that

could damage your vehicle.

A notice tells about something that can damage the

vehicle. Many times, this damage would not be covered

by your vehicle’s warranty, and it could be costly.

The notice tells what to do to help avoid the damage.

When you read other manuals, you might see

CAUTION and NOTICE warnings in different colors

or in different words.

There are also warning labels on the vehicle which

use the same words, CAUTION or NOTICE.

Vehicle Symbols

The vehicle has components and labels that use

symbols instead of text. Symbols are shown along

with the text describing the operation or information

relating to a speciﬁc component, control, message,

gage, or indicator.

iv

Front Seats ......................................................1-2

Power Seats ..................................................1-2

Power Lumbar ...............................................1-3

Heated Seats .................................................1-4

Heated and Cooled Seats ................................1-5

Memory Seat, Mirrors, and Pedals ....................1-6

Power Reclining Seatbacks ..............................1-8

Head Restraints .............................................1-9

Rear Seats .....................................................1-10

Rear Seat Operation .....................................1-10

Safety Belts ...................................................1-12

Safety Belts: They Are for Everyone ................1-12

How to Wear Safety Belts Properly .................1-17

Lap-Shoulder Belt .........................................1-26

Safety Belt Use During Pregnancy ..................1-31

Safety Belt Extender .....................................1-32

Child Restraints .............................................1-32

Older Children ..............................................1-32

Infants and Young Children ............................1-35

Child Restraint Systems .................................1-39

Where to Put the Restraint .............................1-42

Lower Anchors and Tethers for

Children (LATCH) ......................................1-43

Securing a Child Restraint in a

Rear Seat Position ....................................1-50

Securing a Child Restraint in the

Right Front Seat Position ............................1-53

Airbag System ...............................................1-56

Where Are the Airbags? ................................1-59

When Should an Airbag Inﬂate? .....................1-61

What Makes an Airbag Inﬂate? .......................1-63

How Does an Airbag Restrain? .......................1-63

What Will You See After an

Airbag Inﬂates? .........................................1-64

Passenger Sensing System ............................1-65

Servicing Your Airbag-Equipped Vehicle ...........1-70

Adding Equipment to Your

Airbag-Equipped Vehicle .............................1-70

Restraint System Check ..................................1-72

Checking the Restraint Systems ......................1-72

Replacing Restraint System Parts

After a Crash ............................................1-73

Section 1 Seats and Restraint Systems

1-1

Front Seats

Power Seats

The power seat controls are located on the outboard

side of the front seats.

• Move the seat forward or rearward by sliding the

control forward or rearward.

• Raise or lower the front part of the seat cushion

by moving the front of the control up or down.

• Raise or lower the rear part of the seat cushion

by moving the rear of the control up or down.

• Raise or lower the entire seat by moving the

entire control up or down.

The power reclining seatback control is located behind

the power seat control on the outboard side of the

seats. See Power Reclining Seatbacks on page 1-8.

Your vehicle has a memory function which allows

seat settings to be saved and recalled. See Memory

Seat, Mirrors, and Pedals on page 1-6.

Driver’s Seat with Power Seat Control,

Power Recline, and Power Lumbar shown

1-2

Power Lumbar

If the seats have power lumbar, the controls used to

operate this feature are located on the outboard side

of the seats.

• To increase lumbar support, press and hold

the front of the control.

• To decrease lumbar support, press and hold

the rear of the control.

• To raise the height of the lumbar support,

press and hold the top of the control.

• To lower the height of the lumbar support,

press and hold the bottom of the control.

Release the control when the lower seatback reaches

the desired level of lumbar support.

Your vehicle may have a memory function which allows

seat settings to be saved and recalled. See Memory

Seat, Mirrors, and Pedals on page 1-6 for more

information.

Keep in mind that as your seating position changes,

as it may during long trips, so should the position of

your lumbar support. Adjust the seat as needed.

1-3

Heated Seats

If the front seats have the

heated seat feature, the

buttons used to control this

feature are located on

the climate control panel.

+ (Heated Seatback): To heat only the seatback,

press the top button with the heated seatback symbol.

This symbol will appear on the climate control display

to indicate that the feature is on. Press the button

to cycle through the temperature settings of high,

medium, and low and to turn the heated seatback off.

Indicator bars next to the symbol designate the level

of heat selected: three for high, two for medium,

and one for low.

z (Heated Seat and Seatback): To heat the entire

seat, press the bottom button with the heated seat

and seatback symbol.

This symbol will appear on the climate control display

to indicate that the feature is on. Press the button

to cycle through the temperature settings of high,

medium, and low and to turn the heated seat off.

Indicator bars next to the symbol designate the level

of heat selected: three for high, two for medium

, and one for low.

The heated seats will be canceled ten seconds after

the ignition is turned off. If you want to use the heated

seat feature after you restart the vehicle, you will

need to press the appropriate heated seat button again.

If your vehicle has heated and cooled seats, see

Heated and Cooled Seats on page 1-5.

1-4

Heated and Cooled Seats

If the front seats have the

heated and cooled seat

feature, the buttons

used to control this feature

are located on the

climate control panel.

{ (Cooled Seat): To cool the entire seat, press the

button with the cooled seat symbol.

This symbol will appear on the climate control display

to indicate that the feature is on. Press the button

to cycle through the temperature settings of high,

medium, and low and to turn the cooled seat off.

Indicator bars next to the symbol designate the level

of cooling selected: three for high, two for medium,

and one for low.

+ (Heated Seatback): To heat only the seatback,

press the button with the heated seatback symbol.

This symbol will appear on the climate control display

to indicate that the feature is on. Press the button

to cycle through the temperature settings of high,

medium, and low and to turn the heated seatback off.

Indicator bars next to the symbol designate the level

of heat selected: three for high, two for medium,

and one for low.

z (Heated Seat and Seatback): To heat the entire

seat, press the button with the heated seat and seatback

symbol.

This symbol will appear on the climate control display

to indicate that the feature is on. Press the button

to cycle through the temperature settings of high,

medium, and low and to turn the heated seat off.

Indicator bars next to the symbol designate the level

of heat selected: three for high, two for medium,

and one for low.

The heated and cooled seats will be canceled after the

ignition is turned off. If you want to use the heated

and cooled seat feature after you restart your vehicle,

you will need to press the appropriate seat button again.

1-5

Memory Seat, Mirrors, and Pedals

Your vehicle has the memory package.

The controls for this

feature are located on

the driver’s door, and are

used to program and

recall memory settings

for the driver’s seat,

outside mirrors, and the

adjustable throttle and

brake pedal feature,

if your vehicle has it.

To save your positions in memory, do the following:

1. Adjust the driver’s seat, including the seatback

recliner and lumbar, both outside mirrors, and

the throttle and brake pedals to a comfortable

position.

See Outside Power Foldaway Mirrors on page 2-52

and Adjustable Throttle and Brake Pedal on

page 2-34 for more information.

Not all mirrors will have the ability to save and

recall the mirror positions.

2. Press and hold button 1 until two beeps let you

know that the position has been stored.

A second seating, mirror, and throttle and brake pedal

position can be programmed by repeating the above

steps and pressing button 2.

To recall the memory positions, the vehicle must be in

PARK (P). Press and release either button 1 or button 2

corresponding to the desired driving position. The

seat, outside mirrors, and adjustable throttle and brake

pedals will move to the position previously stored.

You will hear a single beep.

1-6

If you use the remote keyless entry transmitter to enter

your vehicle and the remote recall memory feature

is on, automatic seat, mirror, and adjustable pedal

movement will occur. See “MEMORY SEAT RECALL”

under DIC Vehicle Customization on page 3-57 for

more information.

To stop recall movement of the memory feature at

any time, press one of the power seat controls,

memory buttons, power mirror buttons, or adjustable

pedal switch.

If something has blocked the driver’s seat and/or the

adjustable pedals while recalling a memory position,

the driver’s seat and/or the adjustable pedals recall

may stop working. If this happens, remove the

obstruction and press the appropriate function control

for two seconds. Then try recalling the memory

position again by pressing the appropriate memory

button. If the memory position is still not recalling,

see your dealer for service.

Easy Exit Seat

The control for this feature is located on the driver’s

door between buttons 1 and 2.

With the vehicle in PARK (P), the exit position can

be recalled by pressing the exit button. You will hear

a single beep. The driver’s seat will move back.

If the easy exit seat feature is on in the Driver

Information Center (DIC), automatic seat movement

will occur when the key is removed from the ignition.

See “EASY EXIT SEAT” under DIC Vehicle

Customization on page 3-57 for more information.

Further programming for the memory seat feature

can be done using the DIC. You can select the

automatic easy exit seat feature or the remote

memory seat recall feature.

For programming information, see DIC Vehicle

Customization on page 3-57.

1-7

Power Reclining Seatbacks

The controls for the power reclining seatback are located

on the outboard side of the front seats behind the power

seat control.

• To recline the seatback, tilt the top of the control

rearward.

• To bring the seatback forward, tilt the top of the

control forward.

Driver’s Seat with Power Seat Control,

Power Recline, and Power Lumbar shown

1-8

{CAUTION:

Sitting in a reclined position when your vehicle

is in motion can be dangerous. Even if you

buckle up, your safety belts cannot do their

job when you are reclined like this.

The shoulder belt cannot do its job. In a crash,

you could go into it, receiving neck or other

injuries.

The lap belt cannot do its job either. In a crash

the belt could go up over your abdomen.

The belt forces would be there, not at your

pelvic bones. This could cause serious

internal injuries.

For proper protection when the vehicle is in

motion, have the seatback upright. Then sit

well back in the seat and wear your safety

belt properly.

Do not have a seatback reclined if your vehicle is moving.

Your vehicle has a memory function which allows

seat settings to be saved and recalled. See Memory

Seat, Mirrors, and Pedals on page 1-6.

Head Restraints

Adjust the head restraint so that the top of the restraint

is at the same height as the top of the occupant’s

head. This position reduces the chance of a neck

injury in a crash.

1-9

Pull the head restraint up

to raise it. To lower the

head restraint, press

the release button (A),

located on the top of

the seatback, while

you push the head

restraint down.

The front seats may have head restraints that also

tilt forward and rearward.

To tilt the head restraint, grasp the top of the restraint

while pressing the button (B), located on the inboard

side of the head restraint, and move it forward or

rearward until the desired locking position is reached.

Try to move the head restraint after the button is

released to make sure that it is locked in place.

The second row seats may have head rests that can

be adjusted up and down, but they do not tilt.

Rear Seats

Rear Seat Operation

The rear seat is a 60/40 split bench seat that can be

folded to give you more cargo space and access to

the folding midgate. See Midgate

®

on page 2-13

for more information on operation of the folding midgate.

To fold either side of the seat do the following:

1. Push the rear seat head restraints all the way down.

2. Pull the seat loop

located where the

seatback and

seat cushion meet.

The seat cushion

will release and allow

you to tilt it toward

the front of the vehicle.

Notice: Folding a rear seat with the safety belts

still fastened may cause damage to the seat or the

safety belts. Always unbuckle the safety belts

and return them to their normal stowed position

before folding a rear seat.

1-10

3. Fold the seatback forward until it is ﬂat.

You may have to move the front seats

forward slightly to do this.

4. Repeat the procedure for the other side.

To return the seats to the normal position, push

the seatback up and fold the seat cushion down.

{CAUTION:

A safety belt that is improperly routed, not

properly attached, or twisted will not provide

the protection needed in a crash. The person

wearing the belt could be seriously injured.

After raising the rear seatback, always check

to be sure that the safety belts are properly

routed and attached, and are not twisted.

{CAUTION:

If the seatback is not locked, it could move

forward in a sudden stop or crash. That could

cause injury to the person sitting there. Always

be sure to press the rear of the seat cushion

down. This action locks the seatback in place.

Push and pull on the seatback to make sure it is locked.

Raise the head restraint.

1-11

Safety Belts

Safety Belts: They Are for Everyone

This part of the manual tells you how to use safety

belts properly. It also tells you some things you should

not do with safety belts.

{CAUTION:

Do not let anyone ride where he or she cannot

wear a safety belt properly. If you are in a

crash and you are not wearing a safety belt,

your injuries can be much worse. You can hit

things inside the vehicle harder or be ejected

from it and be seriously injured or killed.

In the same crash, you might not be, if you

are buckled up. Always fasten your safety

belt, and check that your passenger(s) are

restrained properly too.

{CAUTION:

People riding on the tailgate (if equipped) can

easily lose their balance and fall even when

the vehicle is operated at low speeds. Falling

from a moving vehicle may result in serious

injuries or death.

{CAUTION:

It is extremely dangerous to ride in a cargo

area, inside or outside of a vehicle. In a

collision, people riding in these areas are more

likely to be seriously injured or killed. Do not

allow people to ride in any area of your vehicle

that is not equipped with seats and safety

belts. Be sure everyone in your vehicle is in

a seat and using a safety belt properly.

Your vehicle has indicators as a reminder to buckle your

safety belts. See Safety Belt Reminders on page 3-31.

1-12

In most states and in all Canadian provinces, the law

requires wearing safety belts. Here is why:

You never know if you will be in a crash. If you do have

a crash, you do not know if it will be a serious one.

A few crashes are mild, and some crashes can be so

serious that even buckled up, a person would not

survive. But most crashes are in between. In many

of them, people who buckle up can survive and

sometimes walk away. Without belts they could have

been badly hurt or killed.

After more than 40 years of safety belts in vehicles,

the facts are clear. In most crashes buckling up

does matter... a lot!

Why Safety Belts Work

When you ride in or on anything, you go as fast as it goes.

Take the simplest vehicle. Suppose it is just a seat

on wheels.

1-13

Put someone on it. Get it up to speed. Then stop the vehicle.

The rider does not stop.

1-14

The person keeps going until stopped by something.

In a real vehicle, it could be the windshield...

or the instrument panel...

1-15

or the safety belts!

With safety belts, you slow down as the vehicle does.

You get more time to stop. You stop over more

distance, and your strongest bones take the forces.

That is why safety belts make such good sense.

Questions and Answers About

Safety Belts

Q: Will I be trapped in the vehicle after a crash if

I am wearing a safety belt?

A: You could be — whether you are wearing a safety

belt or not. But your chance of being conscious

during and after an accident, so you can unbuckle

and get out, is much greater if you are belted.

And you can unbuckle a safety belt, even if you

are upside down.

Q: If my vehicle has airbags, why should I have

to wear safety belts?

A: Airbags are supplemental systems only; so they

work with safety belts — not instead of them.

Whether or not an airbag is provided, all occupants

still have to buckle up to get the most protection.

That is true not only in frontal collisions,

but especially in side and other collisions.

1-16

Page is loading ...

Cadillac ESCALADE EXT 2008 Owner's manual

This manual is also suitable for

Cadillac ESCALADE EXT 2008 Owner's manual