Sytech SY1534BT Owner's manual

Category
FM transmitters
Type
Owner's manual
WELCOME
Thank you for purchasing the Sytech SY-1534BT Bluetooth FM transmitter. In order to fully benefit from this
product, please read the following instructions carefully and store them in a safe place for future reference. We
are sure this product will satisfy your needs. Welcome to Sytech
PARTS OF THE SY-1534BT
1. Volume up/down, / CH+ CH-
2. Power indicator lamp
3. LINE input hole
4. Switch of Bluetooth power
5. Answer/redial
6. Microphone
7. Press to hang up /reject a call / Press and hold to switch to CH FM mode
8. LED display window
9. Power adaptor 9V-24V
10. USB output 1 (USB device input for listening to external audio)
11. USB output 2
Product Features
1. Any angle adjustable, and applicable for all types of vehicles
2: FM transmitter
3: LED display window
4: LINE audio input
5: Independent Bluetooth start/shutdown button
6: Answer/hang up/reject/redial the via Bluetooth
7: Bluetooth stereo music play
8: Call Echo Cancellation and Noise Reduction (CVC) technology
9: Dual USB output voltage, provides powers to other devices and the maximum output is 5V/2.1A
10: Automatic memory function of power failure frequency point
OPERATING INSTRUCTIONS
5.1 Bluetooth mode
5.1.1 Plug the product into the cigarette lighter socket of the car and switch the power to ON. The product
will start up and the LED display will show the frequency point once it has turned on
5.1.2 When using the Bluetooth function on the unit, you must pair it with your mobile device first.
5.1.3 Enable the Bluetooth function of your phone while the Bluetooth hands-free is on and search for the
device“SY-1534BT”, which will display on your phone.
5.1.4 Select “SY-1534BT” and it will pair automatically. A prompt sound will be given after pairing to indicate
that it has been successfully connected.
5.1.5 Making a call
Dial the number through your mobile phone when the unit and the phone are paired. The call will be heard
through the speakers of the car.
5.1.6 Answering a call
If there is an incoming call when the device is paired with the phone, press the
key to answer the call.
While in talking mode you may press the key to switch between the mobile phone microphone and the
SY-1534BT microphone. Press the key to hang up.
5.1.7 Callback
Press the key twice when in Bluetooth mode to redial the last dialed number.
5.1.8 Reject a call
If you do not wish to answer a call, you may press the key to reject.
5.1.9 Play music in your phone
This product supports A2DP function, which allows you to play music from your phone. Music will be
transmitted to your car audio via the FM function of the unit so that you can enjoy your own music through
the car speakers. Press the key to play/pause and press for the next/last song (note: Some of the
older versions of mobile phones may not support this function).
5.2 Audio input mode
5.2.1 Insert the attached line in cable with one end inserted to the sound source end and the other end to
the audio input on the unit.
Press +/- to turn up/down the volume and press and hold it to turn up/down volume quickly.
5.3 FM Adjustment
5.3.1 Press and hold the key to enter into the frequency selection state. At this time, the frequency on the
LED display will flash- now you may press the key to increase/decrease the frequency. Press and
hold key to increase/decrease the frequency quickly. The frequency is adjustable from 87.5 -
108MHZ.
5.4 Power-off memory
Every time when you turn the power off of this product, the system will memorize the FM frequency and the
Bluetooth profile of the mobile phone automatically in order to facilitate your usage.
TECHNICAL PARAMETERS
POINTS OF ATTENTION
1. This product contains dual USB outputs. It can charge two devices at the same time with the maximum
output of 5V/2.1A. Note: When charging two mobile phones of 1A, both ports will work. When charging one
tablet of 2.1A, all the power will be used from one USB port only.
2. Once booted, the product will connect automatically with the phone via Bluetooth. If you then insert a
LINE IN connection, this will take over the Bluetooth function.
3. Never turn the volume too loud (generally at 28 or below) when FM is working in order to avoid sound
distortion. Please adjust the sound volume through the car audio.
4. A built-in antenna is provided for the product, so please avoid using a frequency with strong signal in order
to get a better sound quality.
5. The Bluetooth operating functions may vary according to the mobile phone being used.
6. Some phones may not support automatic connection if they are powered on after the power failure. If so,
please connect them by hand.
7. This product is compatible with more than 95% phones on the market but some are still incompatible.
Please pay attention to it when purchasing our product.
8. The volume should be proper during the call to avoid affecting the other party.
9. Do not use this product in the environment with high temperature, dusts or moisture.
10. Avoid dropping the product to prevent damage to the surface or the body.
11. The Bluetooth of this product supports background playback. If there is an incoming call when playing
music with LINE function, it will automatically switch to the Bluetooth mode. To return to the LINE function,
please disconnect and connect the LINE IN cable once again.
Rated working voltage
12V
Limit working voltage
9 ~ 26V
USB output
5V/2.1A
0~50
SNR
>60dB
Degree of distortion
<0.1%
Frequency response
20Hz
-
15Khz
Resolution of right and
left channel
>60dB
Bluetooth version
Version 2.2
Bluetooth sound
processing
A2DP
(Advance Audio Distribution Profile)
function supported
Bluetooth
transmission distance
10M
-
15M
Effective distance of
Bluetooth microphone
0.5~2M
FM frequency
87.5~108Mhz
FM
Mode
Stereo digital PLL frequency locking
PACKAGE CONTENTS
1. Operating Manual
2. Line in cable
3. Bluetooth FM transmitter
SPECIFICATIONS
- Bluetooth Car Kit with FM transmitter
- Transmit phone calls wirelessly from a Bluetooth mobile phone FM transmitter
- LED Display
- HFP and A2DP function that allows users to stream music wirelessly from a Bluetooth transmitter
- Built-in echo cancellation and noise suppression (CVC)
- Input Aux-in that allows you to connect external music sources and listen through your car speakers
- Power supply: DC 12V / 24V
- 2 USB outputs for charging other devices (DC 5V / 2.1A)
- Frequency: 87.5-108.0 MHz
- Compatible with: MP3 / WMA audio formats
- USB (maximum support) - 32GB
- Transmission Distance -> 10 Meters
DECLARATION OF CONFORMITY
Manufacturer Name: Satyatrade S. L.
Address: Pol. Ind. La Raya. C/ Guadalquivir, 2
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Sytech® SY-1534BT complies with the following directives:
CE Standard: Directive 2004/108EC
Radio frequency R&TTE: Directive 1999/5/EC
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Sytech SY1534BT Owner's manual

Category
FM transmitters
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI