2. Freestyle
  3. fs84871

Freestyle fs84871, Hammerhead Chrono XL Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Freestyle fs84871 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ENGLISH
QUARTZ ANALOG
INSTRUCTIONS
TWO-HAND / THREE-HAND MODELS
1.SecondHand
1
TO SET THE TIME:
1.PullcrownouttorstclickpositionB.
2.Turncrowntosettime.
3.PushcrownbacktopositionA.
TWO-HAND / THREE-HAND DATE
MODELS
1.DateIndicator
TO SET THE TIME:
1.PullcrownouttosecondclickpositionC.
2.Turncrowntosettime.
3.PushcrownbacktopositionA.
TO SET THE DATE:
1.PullcrownouttorstclickpositionB.
2.Turncrowncounter-clockwisetoset
date.
3.PushcrownbacktopositionA.
NOTE:Donotsetthedatebetween9:00
P.M.and1:00A.M.Otherwise,thedate
maynotchangeproperlyonthefollowing
day.Ifitisnecessarytosetthedatedur-
ingthattimeperiod,rstchangethetime
toanytimeoutsideit,thensetthedate
andthenresettothecorrecttime.
THREE-HAND DAY-DATE MODELS
1.Day(oftheweek)Indicator
2.DateIndicator
TO SET THE TIME:
1.PullcrownouttosecondclickpositionC.
2.Turncrowntosettime.
3.PushcrownbacktopositionA.
TO SET THE DAY (OF THE WEEK):
1.PullcrownouttorstclickpositionB.
2.Turncrownclockwisetosetday.
3.PushcrownbacktopositionA.
NOTE:Donotsetthedaybetween9:00
P.M.and1:00A.M.Otherwise,thedaymay
notchangeproperlyonthefollowingday.
Ifitisnecessarytosetthedayduringthat
timeperiod,rstchangethetimetoany
timeoutsideit,thensetthedayandthen
resettothecorrecttime.
TO SET THE DATE:
1.PullcrownouttorstclickpositionB.
2.Turncrowncounter-clockwisetoset
date.
3.PushcrownbacktopositionA.
NOTE:Donotsetthedatebetween9:00
P.M.and1:00A.M.Otherwise,thedate
maynotchangeproperlyonthefollowing
day.Ifitisnecessarytosetthedatedur-
ingthattimeperiod,rstchangethetime
toanytimeoutsideit,thensetthedate
andthenresettothecorrecttime.
TWO-EYE MULTI-FUNCTION MODELS
1.SecondHand
2.DayHand
3.DateHand
TO SET THE DAY (OF THE WEEK):
1.PullcrownouttosecondclickpositionC.
2.Turncrownclockwisetosetday.
3.PushcrownbacktopositionA.
NOTE:TheDayHandwillmovetogether
withtheHourHandandMinuteHand.
Keepturningthecrownuntilthedesired
dayhasbeenreached.
TO SET THE TIME:
1.PullcrownouttosecondclickpositionC.
2.Turncrowntosettime.
3.PushcrownbacktopositionA.
TO SET THE DATE:
1.PullcrownouttorstclickpositionB.
2.Turncrowncounter-clockwisetosetdate.
3.PushcrownbacktopositionA.
NOTE:Donotsetthedatebetween9:00
P.M.and1:00A.M.Otherwise,thedate
maynotchangeproperlyonthefollowing
day.Ifitisnecessarytosetthedatedur-
ingthattimeperiod,rstchangethetime
toanytimeoutsideit,thensetthedate
andthenresettothecorrecttime.
1.SecondHand
2.DateHand
3.24HourHand
TO SET THE TIME:
1.PullcrownouttosecondclickpositionC.
2.Turncrowntosettime.
3.PushcrownbacktopositionA.
NOTE:The24HourHandwillalsobeset
duringtimesetting.
TO SET THE DATE:
1.PullcrownouttorstclickpositionB.
2.Turncrowncounter-clockwisetoset
date.
3.PushcrownbacktopositionA.
NOTE:Donotsetthedatebetween9:00
P.M.and1:00A.M.Otherwise,thedate
maynotchangeproperlyonthefollowing
day.Ifitisnecessarytosetthedatedur-
ingthattimeperiod,rstchangethetime
toanytimeoutsideit,thensetthedate
andthenresettothecorrecttime.
THREE-EYE MULTI-FUNCTION MODELS
1.HourHand
2.MinuteHand
3.SecondHand
4.DateHand
5.DayHand
6.24HourHand
TO SET THE DAY (OF THE WEEK):
1.PullcrownouttosecondclickpositionC.
2.Turncrownclockwisetosetday.
3.PushcrownbacktopositionA.
NOTE:TheDayHandwillmovetogether
withtheHourHandandMinuteHand.
Keepturningthecrownuntilthedesired
dayhasbeenreached.
TO SET THE TIME:
1.PullcrownouttosecondclickpositionC.
2.Turncrowntosettime.
3.PushcrownbacktopositionA.
NOTE:The24HourHandwillalsobeset
duringtimesetting.
TO SET THE DATE:
1.PullcrownouttorstclickpositionB.
2.Turncrowneitherclockwiseor
counter-clockwisetosetdate.
3.PushcrownbacktopositionA.
NOTE:Thedirectionofcrownturning
fordatesettingvariesondifferentwatch
models.
NOTE:Donotsetthedatebetween9:00
P.M.and1:00A.M.Otherwise,thedate
maynotchangeproperlyonthefollowing
day.Ifitisnecessarytosetthedatedur-
ingthattimeperiod,rstchangethetime
toanytimeoutsideit,thensetthedate
andthenresettothecorrecttime.
THREE-EYE CHRONOGRAPH MODELS
1.HourHand
2.MinuteHand
3.SecondHand
4.24HourHand
5.ChronographMinuteHand
6.ChronographSecondHand
7.DateIndicator
S1–Chronographstart/stopbutton
S2–Chronographresetbutton
TO ADJUST THE CHRONOGRAPH HANDS
POSITION:
Beforesettingthetime,checkiftheChro-
nographSecondHandandChronograph
MinuteHandareatthezeroposition.
Ifthechronographisinuse,pressthe
buttoninthefollowingordertoresetit,
andthencheckifthechronographhands
havereturnedtozeroposition.
Ifthechronographiscounting:S1 S2
Ifthechronographisstopped:S2
Incaseoneorseveralchronographhands
arenotatthezeropositionduetocertain
reasons(e.g.followingabatterychange),
thatneedstobeadjusted.
1.PullcrownouttosecondclickpositionC.
2.PressS1buttontosettheChronograph
SecondHand.Holdingdownthebutton
willallowquickadvance.
3.PushcrownbacktopositionA.
TO SET THE TIME:
1.PullcrownouttosecondclickpositionC.
2.Turncrowntosettime.
3.PushcrownbacktopositionA.
NOTE:The24HourHandwillalsobeset
duringtimesetting.
TO SET THE DATE:
1.PullcrownouttorstclickpositionB.
2.Turncrowncounter-clockwisetoset
date.
3.PushcrownbacktopositionA.
NOTE:Donotsetthedatebetween9:00
P.M.and1:00A.M.Otherwise,thedate
maynotchangeproperlyonthefollowing
day.Ifitisnecessarytosetthedatedur-
ingthattimeperiod,rstchangethetime
Toreducecarbonfootprint,these
Freestyleinstructionsareprintedwith
soyinksonrecycledpaper.
ENGLISH
toanytimeoutsideit,thensetthedate
andthenresettothecorrecttime.
TO USE THE CHRONOGRAPH (STOP-
WATCH):
1.PressS1buttontostartcounting.
2.Tostopcounting,pressS1buttononce.
PressS1buttonagaintoresumefrom
whereitleftoff.
3.Toresettozero,pressS1buttontostop
countingandthenpressS2button.
1.HourHand
2.MinuteHand
3.SecondHand
4.24HourHand
5.ChronographMinuteHand
6.ChronographSecondHand
7.Calendar
S1–Chronographstart/stopbutton
S2–Chronographsplit/splitrelease/
resetbutton
TO ADJUST THE CHRONOGRAPH HANDS
POSITION:
Beforesettingthetime,checkifthe
ChronographSecondHandandChrono-
graphMinuteHandareatthe12o’clock
position.
Ifthechronographisinuse,pressthe
buttoninthefollowingordertoresetit,
andthencheckifthechronographhands
havereturnedto12o’clockposition.
Ifthechronographiscounting:S1 S2
Ifthechronographisstopped:S2
Ifthesplittimeisdisplayed: S2
S1 S2
IIncaseoneorseveralchronograph
handsarenotatthe12o’clockposition
duetocertainreasons(e.g.follow-
ingabatterychange),thatneedstobe
adjusted.
1.Pullcrownouttosecondclick
positionC.
2.PressS1orS2buttontosetthe
ChronographSecondHandand
ChronographMinuteHand(me
chanicallycoupled).BypressingS1or
S2button,thehandswillmove
counter-clockwiseorclockwise
respectively.
3.PushcrownbacktopositionA.
TO SET THE TIME:
1.Pullcrownouttosecondclickposition
C.
2.Turncrowntosettime.
3.PushcrownbacktopositionA.
NOTE:The24HourHandwillalsobeset
duringtimesetting.
TO SET THE DATE:
1.PullcrownouttorstclickpositionB.
2.Turncrownclockwisetosetdate.
3.PushcrownbacktopositionA.
NOTE:Donotsetthedatebetween9:00
P.M.and1:00A.M.Otherwise,thedate
maynotchangeproperlyonthefollowing
day.Ifitisnecessarytosetthedatedur-
ingthattimeperiod,rstchangethetime
toanytimeoutsideit,thensetthedate
andthenresettothecorrecttime.
TO USE THE CHRONOGRAPH (STOP-
WATCH):
Forthemeasurementofelapsedtime,
1.PressS1buttontostartcounting.
2.Tostopcounting,pressS1buttononce.
PressS1buttonagaintoresumefrom
whereitleftoff.
3.Toresettozero,pressS1buttontostop
countingandthenpressS2button.
Forthemeasurementofsplittime,
1.PressS1buttontostartcounting.
2.Whilethechronographisrunning,
pressS2buttononcetoregisteralap.
Thechronographisstillrunninginthe
background.
Todisplaythecurrentlyaccumulated
time,pressS2buttonagain.Thechro-
nographhandswillquicklyadvanceto
theongoingmeasuredtime.
3.Repeatthelaststepuntilallthelaps
havebeenregistered.
4.Toresettozero,pressS1buttontostop
countingandthenpressS2button.
NOTE:Thechronographisabletomea-
sureupto60minutes.
TO USE THE BACKLIGHT:
Somewatchmodelsareequippedwithan
electroluminescence(EL)backlight.To
turnonthebacklight,pressthebacklight
button.
Ifthereisnoseparatebacklightbutton,
pressthecrowntoactivatethebacklight.
SCREW-DOWN CROWN
Somewatchmodelsareequippedwith
ascrew-downcrown.Makesuretoun-
screwthecrownbeforepullingoutthe
crownforsetting,thenscrewthecrown
backintightlyaftersettingtoavoidany
waterentry.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/