Hummer 2007 H2 Owner's manual

Seats and Restraint Systems

....................... 7

Front Seats

.............................................. 8

Rear Seats

............................................. 15

Safety Belts

............................................ 24

Child Restraints

...................................... 46

Airbag System

........................................ 77

Restraint System Check

......................... 90

Features and Controls

................................ 93

Keys

....................................................... 95

Doors and Locks

.................................. 100

Windows

............................................... 111

Theft-Deterrent Systems

....................... 115

Starting and Operating Your Vehicle

....... 119

Mirrors

.................................................. 139

OnStar

®

System

................................... 144

Universal Home Remote System

.......... 148

Storage Areas

...................................... 160

Sunroof

................................................ 168

Instrument Panel

....................................... 171

Instrument Panel Overview

................... 174

Climate Controls

................................... 197

Warning Lights, Gages, and

Indicators

.......................................... 204

Driver Information Center (DIC)

............ 222

Audio System(s)

................................... 241

Driving Your Vehicle

................................. 301

Your Driving, the Road, and

Your Vehicle

..................................... 302

Towing

................................................. 369

Service and Appearance Care

.................. 389

Service

................................................. 392

Fuel

...................................................... 394

Checking Things Under the Hood

......... 400

Rear Axle

............................................. 437

Four-Wheel Drive

.................................. 438

Front Axle

............................................ 440

2007 HUMMER H2 Owner Manual M

1

Bulb Replacement

................................ 441

Windshield Wiper Blade

Replacement

..................................... 447

Tires

..................................................... 448

Appearance Care

.................................. 491

Vehicle Identiﬁcation

............................. 502

Electrical System

.................................. 503

Capacities and Speciﬁcations

................ 512

Maintenance Schedule

.............................. 513

Maintenance Schedule

.......................... 514

Customer Assistance Information

............. 535

Customer Assistance and

Information

........................................ 536

Reporting Safety Defects

...................... 552

Index

.......................................................... 555

2

GENERAL MOTORS, GM, the GM Emblem,

HUMMER, the name HUMMER, H2 and the

H2 Design are registered trademarks of

General Motors Corporation.

This manual includes the latest information at the

time it was printed. We reserve the right to

make changes after that time without further

notice. For vehicles ﬁrst sold in Canada, substitute

the name “General Motors of Canada Limited”

for HUMMER whenever it appears in this manual.

This manual describes features that may be

available in this model, but your vehicle may not

have all of them. For example, more than one

entertainment system may be offered or your

vehicle may have been ordered without a front

passenger or rear seats.

Keep this manual in the vehicle, so it will be there

if it is needed while on the road. If the vehicle

is sold, leave this manual in the vehicle.

Canadian Owners

A French language copy of this manual can be

obtained from your dealer or from:

Helm, Incorporated

P.O. Box 07130

Detroit, MI 48207

Litho in U.S.A.

Part No. 15862630 A First Printing

©

3

How to Use This Manual

Many people read the owner manual from

beginning to end when they ﬁrst receive their new

vehicle. If this is done, it can help you learn

about the features and controls for the vehicle.

Pictures and words work together in the

owner manual to explain things.

Index

A good place to quickly locate information about

the vehicle is the Index in the back of the manual.

It is an alphabetical list of what is in the manual

and the page number where it can be found.

Safety Warnings and Symbols

There are a number of safety cautions in this

book. We use a box and the word CAUTION to

tell about things that could hurt you if you were to

ignore the warning.

{CAUTION:

These mean there is something that could

hurt you or other people.

In the caution area, we tell you what the hazard is.

Then we tell you what to do to help avoid or

reduce the hazard. Please read these cautions.

If you do not, you or others could be hurt.

You will also ﬁnd a

circle with a slash

through it in this book.

This safety symbol

means “Do Not,” “Do

Not do this” or “Do Not

let this happen.”

4

Vehicle Damage Warnings

Also, in this manual you will ﬁnd these notices:

Notice: These mean there is something

that could damage your vehicle.

A notice tells about something that can damage

the vehicle. Many times, this damage would not be

covered by your vehicle’s warranty, and it could

be costly. But the notice will tell what to do to help

avoid the damage.

When you read other manuals, you might see

CAUTION and NOTICE warnings in different colors

or in different words.

There are also warning labels on the vehicle.

They use the same words, CAUTION or NOTICE.

Vehicle Symbols

The vehicle has components and labels that use

symbols instead of text. Symbols are shown along

with the text describing the operation or information

relating to a speciﬁc component, control, message,

gage, or indicator.

If you need help ﬁguring out a speciﬁc name of a

component, gage, or indicator, reference the

following topics:

• Seats and Restraint Systems in Section 1

• Features and Controls in Section 2

• Instrument Panel Overview in Section 3

• Climate Controls in Section 3

• Warning Lights, Gages, and Indicators in

Section 3

• Audio System(s) in Section 3

• Engine Compartment Overview in Section 5

5

These are some examples of symbols that may be found on the vehicle:

6

Front Seats ..................................................... 8

Power Seats ................................................. 8

Power Lumbar .............................................. 9

Heated Seats .............................................. 10

Memory Seat and Mirrors ............................ 10

Power Reclining Seatbacks ......................... 12

Head Restraints .......................................... 14

Rear Seats .................................................... 15

Heated Seats .............................................. 15

60/40 Split Bench Seat ............................... 15

Third Row Seat (SUV) ................................ 17

Safety Belts .................................................. 24

Safety Belts: They Are for Everyone .............. 24

Questions and Answers About Safety Belts .... 28

How to Wear Safety Belts Properly ................ 29

Driver Position ............................................. 29

Safety Belt Use During Pregnancy .............. 38

Right Front Passenger Position ................... 39

Rear Seat Passengers ................................ 39

Rear Safety Belt Comfort Guides ................ 42

Safety Belt Extender ................................... 45

Child Restraints ............................................ 46

Older Children ............................................. 46

Infants and Young Children ......................... 49

Child Restraint Systems .............................. 53

Where to Put the Restraint .......................... 57

Lower Anchors and Tethers for

Children (LATCH) .................................... 59

Securing a Child Restraint in a

Rear Seat Position ................................... 69

Securing a Child Restraint in the

Right Front Seat Position ......................... 71

Airbag System .............................................. 77

Where Are the Airbags? .............................. 79

When Should an Airbag Inﬂate? .................. 81

What Makes an Airbag Inﬂate? ................... 82

How Does an Airbag Restrain? ................... 82

What Will You See After an

Airbag Inﬂates? ........................................ 83

Airbag Off Switch ........................................ 84

Servicing Your Airbag-Equipped Vehicle ........ 88

Adding Equipment to Your

Airbag-Equipped Vehicle .......................... 89

Restraint System Check ............................... 90

Checking the Restraint Systems .................. 90

Replacing Restraint System Parts

After a Crash ........................................... 91

Section 1 Seats and Restraint Systems

7

Front Seats

Power Seats

The power seat controls are located on the

outboard edge of the front seats.

To adjust the seat, do any of the following:

• Move the seat forward or rearward by sliding

the horizontal control forward or rearward.

• Raise or lower the front part of the seat

cushion by moving the front of the horizontal

control up or down.

• Raise or lower the rear part of the seat

cushion by moving the rear of the horizontal

control up or down.

• Raise or lower the entire seat by moving the

entire horizontal control up or down.

• Use the vertical control to recline the seatback.

See Power Reclining Seatbacks on page 12.

Your seats may have a memory function which

allows seat settings to be saved and recalled. See

Memory Seat and Mirrors on page 10 for more

information.

8

Power Lumbar

Your vehicle’s seats have power lumbar.

You can increase or

decrease lumbar

support in an area of

the lower seatback with

this control, located

on the outboard sides of

the front seat(s).

To increase support, press and hold the front of

the control. To decrease support, press and

hold the rear of the control. Let go of the control

when the lower seatback reaches the desired level

of support.

You can also reshape the side wing area of the

lower seatback for more lateral support.

To increase support, press and hold the top of the

control. To decrease support, press and hold

the bottom of the control. Let go of the control

when the lower seatback reaches the desired level

of support.

Your vehicle may have a memory function which

allows seat settings to be saved and recalled.

See Memory Seat and Mirrors on page 10 for more

information.

9

Heated Seats

If your vehicle has this

feature, the buttons are

located on the front

doors. The engine must

be running for the

heated seats to work.

To heat the entire seat, press the horizontal button

with the heated seat and seatback symbol.

Press the button to cycle through the temperature

settings of high, medium and low and to turn

the heated seat off. Indicator lights will come on to

designate the level of heat selected: three for

high, two for medium, and one for low.

To heat only the seatback, press the vertical button

with the heated seatback symbol. An indicator light

on the seatback button will come on to designate

that only the seatback is being heated.

Additional presses of the seatback button will cycle

through the heat levels for the seatback only. Press

the horizontal button again to heat the whole seat.

The heated seats will be canceled after the ignition

is turned off. If you still want to use the heated seat

feature after you restart your vehicle, you will need

to press the heated seat button again.

Memory Seat and Mirrors

If your vehicle has this

feature, the controls for

the memory function

are located on the

driver’s door.

These buttons are used to program and recall

memory settings for the driver’s seat and both the

driver’s and passenger’s outside mirrors. The

settings for these features can be saved for up to

two drivers.

10

To store the memory settings, do the following:

1. While the vehicle is in PARK (P), adjust

the driver’s seat, including the seatback

recliner, lumbar, and side wing area, and

both outside mirrors to your preference.

2. Press and hold the 1 or 2 button of the memory

control for three seconds. A double chime will

sound to let you know that the position has

been stored.

To repeat the procedure for a second driver,

follow the preceding steps, but press the other

numbered memory control button.

Each time button 1 or 2 is pressed and released

while the vehicle is in PARK (P), a single chime will

sound and the memory position will be recalled.

To stop recall movement of the memory seat

feature at any time, press one of the memory

buttons or power seat controls.

Easy Exit Seat

The controls for this memory function are located

on the driver’s door.

B(Easy Exit Seat): This button is used to

program and recall the desired driver’s seat

position when exiting or entering the vehicle. The

seat position can be saved for up to two drivers.

To store the seat exit position, do the following:

1. Press and release the 1 or 2 button. The seat

will move to the stored memory position.

2. Adjust the seat to the desired exit position.

3. Press and hold the exit button of the memory

control for three seconds. A double chime will

sound to let you know that the position has

been stored for the selected button 1 or 2.

To repeat the procedure for a second driver,

follow the preceding steps, but press the

other numbered memory control button.

11

To use the seat exit position, do one of the

following:

• Press the exit button on the memory control,

or

• If this feature is activated in the DIC, removing

the key from the ignition will move the seat to

the exit position.

See “Easy Exit Seat” under DIC Vehicle

Customization on page 234 for more information

on activating this feature in the DIC.

Power Reclining Seatbacks

The front seats have power reclining seatbacks.

The control used to operate the seatbacks

are located on the outboard side of the seats.

• To recline the seatback, press the control

toward the rear of the vehicle.

• To raise the seatback, press the control

toward the front of the vehicle.

12

{CAUTION:

Sitting in a reclined position when your

vehicle is in motion can be dangerous.

Even if you buckle up, your safety belts

cannot do their job when you are reclined

like this.

The shoulder belt cannot do its job. In a

crash, you could go into it, receiving neck

or other injuries.

The lap belt cannot do its job either. In a

crash the belt could go up over your

abdomen. The belt forces would be there,

not at your pelvic bones. This could cause

serious internal injuries.

For proper protection when the vehicle is

in motion, have the seatback upright.

Then sit well back in the seat and wear

your safety belt properly.

Do not have a seatback reclined if your vehicle is

moving.

13

Head Restraints

Adjust the head restraint so that the top of the

restraint is at the same height as the top of

the occupant’s head. This position reduces the

chance of a neck injury in a crash.

Pull the head restraint up to raise it. Push the

head restraint down to lower it.

Each front head restraint can also be tilted forward

to four positions by pulling on it. A click will

sound after each tilt position is reached. Pull the

head restraint forward, past the last position,

to release it to the upright position.

The rear seat head restraints are also adjustable

up and down, but they do not tilt.

14

Rear Seats

Heated Seats

If your vehicle has this

feature, the buttons

used to control

this feature are located

on the back of the

center console.

The engine must be

running for the heated

seat feature to work.

To heat the seat cushion, press the button to

cycle through the temperature settings of high and

low. Press the button a third time to turn the

feature off. An indicator light will glow for each heat

setting when the feature is operating.

The heated rear seats will shut off automatically

when the ignition is turned off.

60/40 Split Bench Seat

The 60/40 split bench seats can be folded to give

you more cargo space.

Folding the Seatbacks

The seatbacks are equipped with rearward folding

head restraints (SUV only). When the seatback

is being folded down, the head restraint will

automatically fold rearward.

To fold the rear seat, do the following:

1. Make sure that nothing is under or in front of

the seat.

2. Pull up on the strap

loop located at the

rear of the seat

cushion and pull the

seat cushion up

and fold it forward.

15

Notice: Folding a rear seat with the safety

belts still fastened may cause damage to the

seat or the safety belts. Always unbuckle

the safety belts and return them to their normal

stowed position before folding a rear seat.

3. Pull the seatback forward and fold it down until

it is ﬂat.

If the seatback cannot fold ﬂat because it

interferes with the cushion, try moving the front

seat forward and/or bringing the front

seatback more upright.

4. Repeat the steps for the other half of the

60/40 split bench seat.

Returning the Seats to an Upright

Position

{CAUTION:

If the seatback is not locked, it could

move forward in a sudden stop or crash.

That could cause injury to the person

sitting there. Always push and pull on the

seatback to be sure it is locked.

{CAUTION:

A safety belt that is improperly routed, not

properly attached, or twisted will not

provide the protection needed in a crash.

The person wearing the belt could be

seriously injured. After raising the rear

seatback, always check to be sure that the

safety belts are properly routed and

attached, and are not twisted.

16

To return the seat(s) to the upright position, do the

following:

1. Lift the seatback up and push it rearward all

the way.

2. Lower the seat cushion until it latches into

position.

3. Pull forward on the seatback and up on

the seat cushion to make sure the seat is

securely in place.

4. Return the head restraints (SUV only) to the

upright position.

Third Row Seat (SUV)

Entering or Exiting the Third Row Seat

If your vehicle has a third row seat, you must

fold the second row seat down before entering or

exiting the third row. See “Folding the Seatbacks”

under 60/40 Split Bench Seat on page 15

earlier in this section for instructions.

The third row seatback can be folded and the

entire seat can be tilted or removed from

the vehicle.

Folding the Seatback

To fold the seatback, do the following:

Notice: Folding a rear seat with the safety

belts still fastened may cause damage to the

seat or the safety belts. Always unbuckle

the safety belts and return them to their normal

stowed position before folding a rear seat.

1. Pull up on the

release lever

labeled 1, located on

the rear of the

seatback, and push

the seatback

forward.

17

Unfolding the Seatback

{CAUTION:

If the seatback is not locked, it could

move forward in a sudden stop or crash.

That could cause injury to the person

sitting there. Always push and pull on the

seatback to be sure it is locked.

To return the seatback to the passenger position,

do the following:

1. Pull up on the

release lever

labeled 1 and then

pull up on the

seatback until the

seatback locks

into the upright

position.

2. Push forward on the seatback to make sure it

is locked into position.

Tilting the Seat

1. Fold the seatback forward using the

instructions listed previously.

2. Unlatch the seat

from the ﬂoor by

pulling up on

the lever labeled 2,

located on the

rear of the seat.

3. Lift the rear of the seat up from the ﬂoor and

push it forward until it locks into place. You

will not be able to unlatch the seat from

the ﬂoor unless the seatback is folded down.

The seat will now remain locked in the upright

position.

18

Returning the Seat from a Tilted to an

Upright Position

{CAUTION:

If the seatback is not locked, it could

move forward in a sudden stop or crash.

That could cause injury to the person

sitting there. Always push and pull on the

seatback to be sure it is locked.

To return the seatback to an upright position, do

the following:

1. Pull the lever labeled 3 toward you.

2. While still holding lever 3 toward you, grasp

the top of the seat and pull it toward you

slightly.

19

3. Let go of lever 3 and pull the seat

completely down.

4. Push down on the seat ﬁrmly. Try pulling it up

to be sure it is locked into place.

5. Pull up on the

release lever

labeled 1 and then

pull up on the

seatback until the

seatback locks into

the upright position.

Removing the Seat

To remove the seat, do the following:

1. Open the liftgate.

Notice: Folding a rear seat with the safety

belts still fastened may cause damage to the

seat or the safety belts. Always unbuckle

the safety belts and return them to their normal

stowed position before folding a rear seat.

2. Fold the seatback

forward onto the

seat cushion

by using the lever

labeled 1. The

seat cannot

be removed unless

the seatback is

folded.

20

Page is loading ...

Hummer 2007 H2 Owner's manual

This manual is also suitable for

Hummer 2007 H2 Owner's manual

Related papers

Other documents