Zanussi ZHI611GM is a traditional type of ducting hood for mounting on a wall or under an overhead unit. This ducting hood has a light switch and a panel with electronic servo controls. It takes about 20 seconds for the panel to open and about 50 seconds to close. The ducting hood has two lights, each max. 40 Watts (E14 connector). The ducting space can be created by providing a dedicated ducting outlet, at ceiling height, or with a T junction on the exhaust pipe. Thus, when the hood is closed the ducting space remains unvaried. The ducting hood is supplied complete with power cable and plug.
Zanussi ZHI611GM is a traditional type of ducting hood for mounting on a wall or under an overhead unit. This ducting hood has a light switch and a panel with electronic servo controls. It takes about 20 seconds for the panel to open and about 50 seconds to close. The ducting hood has two lights, each max. 40 Watts (E14 connector). The ducting space can be created by providing a dedicated ducting outlet, at ceiling height, or with a T junction on the exhaust pipe. Thus, when the hood is closed the ducting space remains unvaried. The ducting hood is supplied complete with power cable and plug.
Zanussi ZHI611GM is a traditional type of ducting hood for mounting on a wall or under an overhead unit. This ducting hood has a light switch and a panel with electronic servo controls. It takes about 20 seconds for the panel to open and about 50 seconds to close. The ducting hood has two lights, each max. 40 Watts (E14 connector). The ducting space can be created by providing a dedicated ducting outlet, at ceiling height, or with a T junction on the exhaust pipe. Thus, when the hood is closed the ducting space remains unvaried. The ducting hood is supplied complete with power cable and plug.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI