Welcome
Thank you for purchasing the new Mincer SY-PI700. In order to fully benefit from this product
please read the following instructions carefully and store this user manual in a safe place for
future reference.
Parts Description
1. Motor
2. Mincing recipient
3. Blades
4. Cover
5. Spatula
6. Blade Base
General warnings
• Carefully read these instructions before using the chopper for the first time and keep them for
future enquiries.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliances by a person responsible for their
safety.
• Keep all plastic bags and packaging components out of the reach of children. They are
potentially dangerous.
• Do not connect the appliance to the mains without checking that the voltage on the rating plate
and that of your household are the same.
VERY IMPORTANT: Do not immerse the main body of the appliance in water or any other
liquid.
• This appliance has been designed for domestic only.
• After each use allow to cool for some minutes before using it again.
• Do never introduce your hand in the container being the appliance switched on.
• Do not use the empty chopper.
• Don’t allow children play with the appliance. Keep the appliance out of the reach of children.
• Do not remove the lid until the blade is totally stopped and the appliance has been switched off.
• Make sure neither the appliance nor the cable is in direct contact with hot surfaces or objects.
• Always place it on a flat surface.
• Do not leave the blender plugged in if it is not going to be used.
• Take all necessary precautions while handling the blade, as it is very sharp.
• If the cable were to deteriorate it must be changed by an Authorized Service Centre.
Operating Instructions
Make sure that the voltage indicated on the rating plate match that of your outlet.
• Place the motor unit on the table.
• Place the base of the blades
• Place the container on the motor unit.
• Engage the blades to chop in the container by pushing the base of the blades until you hear a
click
Handle blades carefully, as they are extremely sharp .
• Cut the ingredients into pieces and insert the container.
Never put liquid or moist food in the container.
• Place the lid on the container.
• You can now plug the appliance into the mains.
• Press the top to start the process
• To stop the process, stop pressing the top cover.
Before removing the cover, always wait till the blades are completely stopped.
• Unplug the appliance after each use.
• To remove the blades first grip the bowl with both hands, press the top button you’re your
index finger, and then lift the bowl and blades simultaneously.
Warning
• Do not use the appliance if it is empty.
• Allow to cool for a few minutes before using again.
• Do not place the unit's motor under water or dishwasher. You can clean it with a damp cloth.
If you followed the instructions and still it is not working, take it to Sytech Service Centre.
Maintenance and Cleaning
• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• Separate all the parts before cleaning. Keep in mind that the blade is very sharp so handle it with
care.
• You can clean the blade, the container and the lid with water and soap (not in the washing machine).
Be aware of drying carefully the blade after it is clean.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the
surfaces of the appliance.
Declaration of Conformity
Manufacturer Name: Satyatrade S. L.
Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: Mincer
Sytech® SY-PI700 complies with the following directives:
EMC Standard: Directive 2004/108/CE
LFGB Standards
ROHS Standard: 2011/65/EC Restriction of Hazardous Substances
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator
/