Prestigio PKR1 User manual

EN

EN-1

Introduction

Near Field Communication (NFC) is a short-range wireless technology that's

designed for NFC-enabled smartphones, tablet PCs, etc to transfer data by

simply tapping the back of those devices together.

NFC tag is an unpowered NFC chip, and can be read by NFC-enabled devices. For

these devices, with just one tap against NFC MultiTag, they will automatically

perform a pre-programmed action or set of actions – such as starting an app,

turning on Wi-Fi, or even sending pre-written SMS.

Getting Started

1. Turn on NFC: Settings > Wireless & Networks > More... > NFC.

2. Tap your device against an NFC Tag.

3. Your device will read the Tag information, and then launch or apply the

relevant apps or settings.

Note: You should first create your own tasks for the Tag in the app called "NFC

Task Launcher" or other similar apps installed on your device.

EN-2

EN

Examples

Example 1 Bedside mode

In "NFC Task Launcher", create Tag task for bedside mode, such as enabling

silent mode, opening the bedside clock application, setting alarm, turning Wi-

Fi off and so on. By tapping this NFC Tag, you can quickly put your phone into

bedside mode without making settings one by one.

Example 2 Home mode

Create a task for an NFC Tag to turn on Wi-Fi network, turn off GPS and stick it

near your entrance. When you arrive home, tap your device against the Tag,

EN

EN-3

then it will automatically turn on home Wi-Fi and turn off GPS for you.

Example 3 Car mode

Create a task for an NFC Tag to enable Bluetooth, turn on GPS, start GPS

navigation app, and then stick it into your car. Next time when go to driving, you

can quickly connect your phone to Bluetooth handset, and find your way around

efficiently.

As the Prestigio products are constantly updated and improved, your

device’s software and hardware may have a slightly different

appearance or modified functionality than presented in this Quick Start Guide.

Prestigio hereby states that this MultiTag

complies to basic requirements and

another relevant regulations given by the EU directive 1999/5/EC. Full version

of the declaration of conformity is available on:

http://www.prestigio.com/compliance.

Page is loading ...

UA-2

UA

приклади

Приклад 1: Нічний режим

In "NFC Task Launcher", create Tag task for bedside mode, such as enabling

silent mode, opening the bedside clock application, setting alarm, turning Wi-

Fi off and so on. By tapping this NFC Tag, you can quickly put your phone into

bedside mode without making settings one by one.

Приклад 2: Режим «Вдома»

Page is loading ...

Prestigio PKR1 User manual

Related papers

Other documents