LG CM1560 User manual

Brand: LG

Model: CM1560

Category: Car media receivers

Type: User manual

This manual is also suitable for

LG CM1560

OWNER’S MANUAL

Micro Hi-Fi

Audio

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL

CM1560 (CM1560, CMS1560F)

*MFL69451228*

www.lg.com

1 Getting Started

Getting Started 3

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral triangle

is intended to alert the user to the

presence of uninsulated dangerous

voltage within the product’s

enclosure that may be of sufcient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing) instructions

in the literature accompanying the

product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from overheating.

The openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read

this owner’s manual carefully and retain it for future

reference. Shall the unit require maintenance, contact

an authorized service center.

Use of controls, adjustments or the performance of

procedures other than those specied herein may

result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try

to open the enclosure.

CAUTION concerning the Power cord

Most appliances recommend they be placed upon a

dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an exact

replacement part by an authorized service center.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the appliance. The Power Plug is the disconnecting

device. In case of an emergency, the Power Plug must

remain readily accessible.

Getting Started4

Getting Started

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the battery

from the equipment: Remove the old battery

or battery pack, follow the steps in reverse order

than the assembly. To prevent contamination of

the environment and bring on possible threat

to human and animal health, the old battery or

the battery put it in the appropriate container at

designated collection points. Do not dispose of

batteries or battery together with other waste. It is

recommended that you use local, free reimbursement

systems batteries and accumulators. The battery

shall not be exposed to excessive heat such as

sunshine, re or the like.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

Getting Started 5

Getting Started

Symbols

Refers to alternating current(AC).

Refers to direct current(DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents6

Table of Contents

1 Getting Started

3 Safety Information

8 Unique Features

8 Playable file Requirement

8 – Music file requirement

9 – Compatible USB Devices

9 – USB device requirement

10 Remote control

12 Front Panel

13 Rear Panel

2 Connecting

14 Connecting to speakers

14 – Connecting the speakers to the unit

15 Optional Equipment Connection

15 – USB Connection

15 – PORT. IN Connection

3 Operating

16 Basic Operations

16 – CD/USB Operations

17 Other Operations

17 – Programmed Playback

17 – Deleting Programmed list

18 – Selecting a folder

18 – Displaying file information

(ID3 TAG)

18 – Turn off the sound temporarily

19 – Sleep Timer Setting

19 – Dimmer

19 – DEMO

19 – Auto power down

20 – AUTO POWER On

20 – Auto function change

21 Sound adjustment

22 Using a BLUETOOTH® wireless technology

22 – Listening to music stored on the

BLUETOOTH devices

24 Radio Operations

24 – Listening to the radio

24 – Improving poor FM reception

24 – Presetting the Radio Stations

24 – Deleting all the saved stations

24 – Seeing information about a Radio station

Table of Contents 7

4 Troubleshooting

25 Troubleshooting

5 Appendix

26 Main unit

27 Speakers

28 Maintenance

28 – Handling the Unit

28 – Notes on Discs

29 Trademarks and Licenses

Getting Started8

Getting Started

Unique Features

BLUETOOTH

Listens to music stored on your Bluetooth device.

Playable file

Requirement

Music file requirement

MP3/ WMA le compatibility with this unit is limited

as follows.

y Sampling Frequency : 8 - 48 kHz (MP3), 8 - 48

kHz (WMA)

y Bit rate : 32 - 384 kbps (MP3), 32 - 384 kbps

(WMA)

y Maximum les : Under 999

y File extensions : “.mp3”/ “.wma”

y CD-ROM le format : ISO 9660/JOLIET

y We recommend that you use “Easy-CD Creator”,

which creates an ISO 9660 le system.

The DTS is not supported. In case of DTS audio

format, audio is not output.

You have to set the disc format option to [Mastered]

in order to make the discs compatible with the LG

players when formatting rewritable discs. When

setting the option to Live File System, you cannot use

it on LG players.

(Mastered/Live File System : Disc format system for

Windows Vista)

Getting Started 9

Getting Started

Compatible USB Devices

y MP3 Player : Flash type MP3 player.

y USB Flash Drive :

Devices that support USB2.0 or USB1.1.

y The USB function of this unit does not support all

USB devices.

USB device requirement

y Devices which require additional program

installation when you have connected it to a

computer, are not supported.

y Do not extract the USB device while in operation.

y For a large capacity USB, it may take a few minute

to be searched.

y To prevent data loss, back up all data.

y If you use a USB extension cable or USB hub, the

USB device is not recognized.

y Using NTFS le system is not supported.

(Only FAT(16/32) le system is supported.)

y This unit recognizes up to 1,000 les.

y External HDD, card readers, locked devices, or hard

type USB devices are not supported.

y USB port of the unit cannot be connected to the

PC. The unit cannot be used as a storage device.

y Some USB may not work with this unit.

Getting Started10

Getting Started

Remote control

Replacement of battery

Remove the battery cover on the rear of the remote

control, and insert the batteries with 4 and 5

matched correctly.

• • • • • • • • • • • • • • a • • • • • • • • • • • • •

1 (Standby) : Switches the unit ON or OFF.

SLEEP : Sets the system to turn off automatically at

a specified time.

VOL (Volume) +/- : Adjusts speaker volume.

F (Function) : Selects the function and input source.

(Mute) : Mutes the sound.

PRESET/FOLDER W/S :

- Searches for a folder of MP3/WMA les. When

a CD/USB containing MP3/WMA les in several

folders is being played, press PRESET/FOLDER

W/S to select the folder you want to play.

- Chooses a preset number for a radio station.

Getting Started 11

Getting Started

• • • • • • • • • • • • • • b • • • • • • • • • • • • •

PROGRAM/MEMORY :

- Stores radio stations.

- Creates a programmed list you want to listen to.

DIMMER : The display windows dims over few steps.

DELETE : Deletes a song on the programmed list.

SOUND EFFECT : Chooses sound impressions.

REPEAT : Plays your tracks/les repeatedly or

randomly.

INFO : Sees information about your music. An MP3

le often comes with ID3 tag. The tag gives the Title,

Artist, Album or Time information.

• • • • • • • • • • • • • • c • • • • • • • • • • • • •

TUNING -/+ : Selects the radio stations.

C/V (Skip/Search) :

- Skips fast backward or forward.

- Searches for a section within a track/le.

d/M (Play/Pause) :

- Starts or pauses playback.

- Selects STEREO/MONO.

RDS : RDS (Radio Data System).

Z (Stop) : Stops playback.

PTY : Searches radio stations by radio type.

Getting Started12

Getting Started

Front Panel

a 1/! (Standby/On)

Switches the unit ON or OFF.

F (Function)

Selects the function or input source.

Y/U (Skip/Search)

- Searches backward or forward.

- Skips to the previous/next track/le.

TUNING - / +

Selects the radio stations.

T (Play/Pause)

- Starts or pauses playback.

- Selects Stereo/Mono.

I (Stop)

Stops playback.

b R (Open)

Uses it when inserting or removing a CD.

c Display window

d Volume Knob

Adjusts volume of speaker.

e USB

Plays the audio les by connecting the USB

device.

f PORT. (Portable) IN

Connects to a Portable device.

Getting Started 13

Getting Started

Rear Panel

R (6 Ω) L (6 Ω)

a FM ANTENNA

b SPEAKERS (L/R) terminals

c POWER IN

2 Connecting

Connecting14

Connecting

Connecting to speakers

Connecting the speakers to the

unit

To connect the cable to the unit, press each plastic

nger pad to open the connection terminals on the

unit. Insert the wire and release the nger pad.

Connect the black of each wire to the terminals

marked - (minus) and the other end to the terminals

marked + (plus).

y Make sure children do not put their hands or

any objects into the *speaker duct.

* Speaker duct : A hole for plentiful bass

sound on speaker cabinet (enclosure)

y Use the speaker supplied with this unit only.

Using any other speaker may cause

malfunction.

y The speakers contain magnet parts, so color

irregularity may occur on the TV screen or PC

monitor screen. Please use the speakers far

away from either TV screen or PC monitor.

Caution

Connecting 15

Connecting

Optional Equipment

Connection

USB Connection

Connect a USB device to the USB ports on the unit.

Removing the USB device from the unit.

1. Choose a different function/mode or

press Z on the remote control or I on

the unit twice in a row.

2. Remove the USB device from the unit.

Note

PORT. IN Connection

Connect an output (earphone or line out) of portable

device (MP3 or PMP etc) to the PORT. IN connector.

Portable cable

MP3 player etc.

Listening to music from your portable

player or external device

The unit can be used to play the music from many

types of portable player or external device.

1. Connect the portable player to the PORT. IN

connector of the unit.

2. Turn the power on by pressing 1 on the remote

control or 1/! on the unit.

3. Press F on the remote control or on the unit to

select PORTABLE function.

4. Turn on the portable player or external device and

start it playing.

3 Operating

Operating16

Operating

Basic Operations

CD/USB Operations

1. Insert the disc by pressing R on the unit or

connect the USB device to the USB port.

2. Select CD or USB function by pressing F on the

remote control or on the unit.

To Do this

Stop

Press Z on the remote control or

I on the unit.

Playback

Press d/M on the remote control

or T on the unit.

Pause

Press d/M on the remote control

or T on the unit.

Searching

for a section

within

a track/le

Press and hold C/V on the

remote control or Y/U on the

unit during playback and release it at

the point you want to listen to.

Skipping to

the next/

track/le

- In stop status,

Press C/V on the remote

control or Y/U on the unit to

go to the next/previous track/le.

- During playback,

press V on the remote control or

U on the unit to go to the next

track/le.

Playing less than 2 seconds, press

C on the remote control or Y

on the unit to go to the previous

track/le.

Playing after 3 seconds, press C

on the remote control or Y on

the unit to go to the beginning of

the track/le.

Playing

repeatedly or

randomly

Press REPEAT on the remote

control repeatedly. Refer to the note

for details about the display change.

y The display changes in the following order.

USB

MP3/WMA CD

AUDIO CD

RPT 1

RPT*DIR

RPT ALL

RANDOM

OFF

RPT 1

RPT DIR

RPT ALL

RANDOM

OFF

RPT 1

RPT ALL

RANDOM

OFF

*DIR : Directory

y When you play programmed list, only RPT 1

and RPT ALL are available.

Note

Operating 17

Operating

Other Operations

Programmed Playback

The program function enables you to store your

favorite les from any disc or USB device.

A program can contain 20 tracks/les.

1. Press PROGRAM/MEMORY on the remote

control in stop status.

2. Press C/V on the remote control or

Y/U on the unit to select a track/file.

3. Press PROGRAM/MEMORY on the remote

control to save and select a next track/file.

4. Repeat steps 2 - 3 to store other tracks/files.

5. Press d/M on the remote control or T on the

unit to play the programmed music tracks/les.

6. To clear your selection, press Z on the remote

control or I on the unit.

When making or modifying the programmed

list, REPEAT mode is off.

Note

Deleting Programmed list

Deleting function only works in the edit mode.

1. Press PROGRAM/MEMORY on the remote

control in stop status.

2. Select a song by pressing PROGRAM/MEMORY

or PRESET/FOLDER W/S on the remote

control repeatedly.

3. Press DELETE on the remote control while a

song is selected.

y Programmed list is cleared in the case below.

- Removing the disc or the USB device.

- Unplugging the power cord.

y Program is switched off in the case below.

- Changing to a different function.

- Turning off and on the unit.

Note

Operating18

Operating

Selecting a folder

1. Press PRESET/FOLDER W/S on the remote

control repeatedly until a desired folder appears.

2. Press d/M on the remote control or T on the

unit to play it. The first file of folder will be played.

(During playback, if you selecting a folder you

want, this step is not necessary.)

y USB/CD Folders/Files are recognized as

below

*ROOT

File_01

File

LG CM1560 User manual

Brand: LG

Model: CM1560

Category: Car media receivers

Type: User manual

This manual is also suitable for

LG CM1560

Download PDF

report

LG CM1560 User manual

This manual is also suitable for

LG CM1560 User manual

Related papers

Other documents