Metra JP-702FLB Operating instructions

386-257-2956

460 Walker Street, Holly Hill, FL 32117

Fog Light with Halo

The fog light replacements come with a 9145 connector.

This connector contains, both +12V and ground.

To use the DRL function, connect the DRL wire to a

switched +12V source, such as an accessory or ignition

circuit. The DRL halo will illuminate when this circuit is

activated.

Connect the Turn Signal wire to the +12V source for the

turn signal light for that side of the vehicle.

www.MetraOnline.com

1/21 - Rev. 1