Page is loading ...
OWNERS MANUAL
Classic edition™
Thank you for purchasing a UNiQ Cycle Sounds® speaker system! We are proud to offer you the best motorcycle
and powersports speaker systems on the market backed by award winning customer service and an industry leading
lifetime warranty!
Table of Contents
1. Items Inventory 3. Choosing an audio device 5. Installation Instructions 7. Repairs & Returns
2. Features 4. Mounting options 6. Important Installation Notes 8. Warranty/Guarantee (Back Cover)
1. Items Inventory Each UNiQ Cycle Sounds Speaker System includes
• Highway Rated Pioneer™ speakers in waterproof housings • Bluetooth handlebar controller
• 300W mini motorcycle amplier with wiring • Inline Volume Controller
• Three-piece polished chrome mounting clamps • 3.5mm to RCA Cable
2. Features
• Powerful, clear sound at highway speeds and beyond • Weather, vibration and heat tested to over 140° for any environment
• Universal t for all Harley-Davidson®, Metric, Victory™ & more! • Versatile mounting locations for handlebars, highway bars and more!
• Works with iPod/iPhone, MP3, Mobile Phones Sirius/XM, AM/FM & more • Lifetime Warranty* & 30-day Money-Back Satisfaction Guarantee*
• Acoustic bafes for improved bass, clarity and acoustics
3. Choosing an Audio Device
The UNiQ Cycle Sounds system works with any personal audio device. Examples include iPod/iPhone, MP3 Players, XM/Sirius Satellite, AM/FM or any
other device with a standard headphone jack (3.5mm output).
PLEASE NOTE: Most audio devices are NOT waterproof
4. Mounting Options
Possible speaker mounting locations include: Possible amplier mounting locations include:
• Handlebars • Spotlight Mounting Bar • Under The Seat • Fork Bag
• Engine Guard/Highway Bars • Forks • Side Tool Compartment • Windshield Bag
• Luggage Rack • Risers • Saddlebag • Front Down Tubes
It’s worth taking some time to consider the best location for your UNiQ Cycle Sounds amplied speaker system. While many options are possible, choose
one that will look best from both the front and back, give you optimal sound and not interfere with vehicle operation or safety. An ideal location is behind a
windshield* on your handlebars using the provided three-piece mounting brackets. Mounting here brings the speakers closer to the rider for optimal sound
and appearance. (*Windshield is not required, but will offer a louder sound due to the blocked wind).
5. Installation Instructions
Important: Review important installation notes located at the end of this section prior to continuing with installation.
Mount the Speaker Clamps
Mount the clamps to your handlebars, highway bars or other location and ensure the 4 allen screws on each clamp are securely tightened. The clamps
themselves will tighten when the speakers are installed.
Mount the Speakers
Feed the wire through the clamp and mount each speaker to the clamp (Flat washer and lock washer go on the bottom). Make sure they are tightly and
safely secured, but do not over tighten. Run the speaker wires down to where you are going to mount the amplier, being careful to avoid the engine or any
area that could cause heat or other damage to the wire/vehicle or inhibit your driving ability.
Amplier Power Plug Hook Up
Find a place where you want to mount the amplier away from direct exposure to the elements such as a tool compartment, under the seat, fork bag,
saddlebag, etc. Most places will be ne, but try to avoid areas that could cause extreme overheating (such as places wrapped in foam or cotton).
Take the black (-) ground wire and run it to the negative (-) battery terminal. Take the red (+) positive wire and connect it to positive (+) battery terminal
(We suggest installing a 5 amp inline fuse along this wire, however it is not required). Take the orange remote wire and connect it to a switched 12v power
source (such as the headlight or taillight wire) OR through a toggle switch then to the battery positive (+).
**The orange wire MUST be connected. This is what tells the system to turn on and off. If the orange, black and red wires are not connected, the system will NOT work.
Amplier to Speaker Hook Up
Connect the black wire with white stripe (-) from the left speaker to the green wire from the amp.
Connect the black wire without the white stripe (+) from the left speaker to the brown wire from amp.
Connect the black wire with white Stripe (-) from the right speaker to the dark blue wire from the amp.
Connect the black wire without the white stripe (+) from the right speaker to the orange wire from amp.
Amplier Low Input (For connecting your audio device)
If you wish to also use your own audio device, then nd the black cable with the 3.5mm earphone jack on one end and the red & white (RCA) plug on the
other end. Plug the red and the white ends into the corresponding Low input of the Amplier. Run the other end of the wire up to your audio device (iPod,
MP3 player, satellite, walkman, etc) and plug it into the headphone jack of this device OR plug it directly in to the optional Bluetooth Module and follow its
instructions. (Bluetooth may lower volume output).
In-line Noise Suppressor (Available Upon Request)
Filter is only needed if you hear feedback or humming through your speakers. If this happens, install the noise lter between the amplier and the battery
by connecting the blue wire to the positive (+) battery terminal and the red wire to the red (+) positive wire from the amplier. Do not connect the black wire.
Most applications will not require the installation of this noise suppressor.
If you have poor or no sound or receive feedback (even with the noise suppressor), please re-check all wires, including positive and negative connections
and conrm that your system is connected to a good ground. Conrm that no wires are stripped and touching metal. If available, also test the system using
a different audio device or the built in USB or FM.
Load your USB drive w/ MP3 ONLY songs from your computer. If you need assistance with this step, please call and we can help!
6. Important Installation Notes
When rst listening to your system, you will need to adjust the levels and/or EQ on your audio device for optimal sound output. You will also need to adjust
the amplier gain level. We recommend starting at the lowest settings and slowly turning it up until you reach optimal sound quality. The amp crossover
switch should always be at H (more volume, less bass) or Off (more bass, less volume) setting.
*Make sure the speakers, amplier, lters and any wires or other components will not interfere with your steering, gauges, line of sight, or anything else
that could affect or inhibit your driving ability or vehicle operation.
Make sure that all wires are away from hot areas, and that everything is secured to your vehicle. Make sure your driving ability or vehicle operation will
in no way be inhibited by the installation. We are not responsible for systems installed or used incorrectly.
SATELLITE RADIO USERS
If after installation you receive a whining sound in your motorcycle speakers, call or email us to request a free ground loop isolator.
ROAD KING RIDERS
Install to extra accessory switch using these instructions: http://www.uniqcyclesounds.com/roadking
BLUETOOTH HANDLEBAR CONTROLLER
Attach the Bluetooth controller to the handlebars using the included attachment. This will mount easily to any 1-1/4” bar. For a 1” bar, we suggest
adding some of the included 3M tape to keep it from moving on the bar. Also be sure the device is snug and secure in the holder. Device is not
waterproof and should be move to a dry place if it starts to get wet. See separate controller instructions on how to pair and use the controller.
H-D® (to 2011) T-TAP INSTALLATION (SOLD SEPERATELY)
Under the seat of your Harley-Davidson you will nd a place to unplug the harness and connect the T-Tap (inline). Next, connect the orange wire from
the amplier to the orange wire on the T-Tap, connect the black wire to the Black wire on the T-Tap and connect the red wire to the battery positive (+).
This will allow the system to turn on/off with the ignition/accessory. (Sportsters are not compatible with these T-Taps)
7. Repairs & Returns
For repairs and returns, please review the UNiQ Cycle Sounds Warranty and Guarantee information on the back page of this manual. Complete and
include the following information with your product(s) and ship USPS Only to:
UNiQ Cycle Sounds
PO Box 271093 NO RETURNS WILL BE PROCESSED WITHOUT AN RMA #
Ft Collins, CO 80527 Call 888-864-7721 or visit our website Returns section for an RMA # and instructions.
□ Return □ Repair/Exchange
Name: ________________________________________________________________________________________
Address: ______________________________________________________________________________________
______________________________________________________________________________________________
City: __________________________________________________________________________________________
State: ___________________________________________________________ Zip: __________________________
RMA # (Must Be Included): ________________________________________________________________________
Reason for Return or Repair: _______________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
Satisfaction Guarantee*
If you nd a louder, better system or for any other reason you are not 100% satised with any of your UNiQ Cycle Sounds system(s), you may return
it for a refund or exchange. Just return the product to us in like-new condition within 30 days from the date you receive it, and we will refund the full
purchase price less shipping costs, which are nonrefundable. You must receive an RMA # before sending a product back to ensure proper credit. To
receive an RMA and return instructions simply send an email to [email protected], call us or visit the warranty & returns section on our website.
*Products purchased from another source (such as a dealer) must be returned to that dealer and adhere to their return policies.
Lifetime Warranty
UNiQ Cycle Sounds warrants every single piece and component of each new UNiQ Cycle Sounds motorcycle speaker system system (Classic,
Touring, Platinum and Unplugged editions) to be free from manufacturer defect in materials and workmanship for the LIFETIME of the product. In the
unlikely event of a manufacturer related failure, UNiQ Cycle Sounds agrees to remedy any such defect or replace the system or system component,
at our option, for the lifetime of the product, to the original purchaser. For full warranty info, visit: http://www.uniqcyclesounds.com/warranty
Repairs & Returns
For all repairs and returns, please complete and include the form on the reverse side of this page and ship to the following address:
UNiQ Cycle Sounds
PO Box 271093
Ft Collins, CO 80527
888.864.7721
www.uniqcyclesounds.com
Upon purchase of the UNiQ Cycle Sounds motorcycle speaker system, the consumer (“you”) agrees with UNiQ Cycle Sounds, LLC (aka “UNiQ Cycle Sounds”, “We”, “Us”)
to be bound by our terms, conditions and legal notices. Please review our terms, conditions and legal notices online at http://www.uniqcyclesounds.com/pages/warranty-information
or call us at 888-864-7721 to receive a hard copy by mail. If you do not agree with our terms you may return the product for an immediate refund. SYSTEM 0313 REV A
/
