Q41G78D481336A
Version: BS1B2227Q1T
Printed in China
PC:
NUC:
Align holes of VESA compli-
ant device with those of
bracket and screw up with
the screws provided.
Compatible with Philips Height Adjustment Base of
M10 B2B slim HAS (for 21.5"/23.8"/27")
X 4
X 4
X 1
X 1
Register your product and get support at
www.philips.com/welcome
Quick
Start
Register your product and get support at
www.philips.com/welcome
Quick
Start
VESA Bracket
BS1B2227B
VESA Bracket
BS1B2227B
1
Slide down the bracket with
mounted device into Philips
Height Ajustment base.
Option:
Paste the adhesive foam strip to the
VESA bracket under the top side and
attach it on the monitor stand.
This is an optional step.
If you don’t want to stick VESA
bracket to the monitor stand, go to
next step.
2
Secure two screws to the
rear cover of the NUC.
Slide the screws from up to
down.
Follow the arrows indicated
on the the bracket, then slide
the bracket on the stand until
it’s xed.
or
1 2
1 2
3 4
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Intel NUC5i3RYH User manual
-
-
ASROCK NUC BOX Series User manual
-
-
-
-
Intel NUC5i5MYHE User guide
-
-
-
Inter-Tech 88881188 Datasheet