Canada
25 Interchange Way Vaughan, ON L4K 5W3
Telephone: (905) 660-4655 | Fax: (905) 660-4113
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: (888) 660-4655 | Fax Toll Free: (888) 660-4113
www.mircom.com
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND
NOT INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance,
installation, testing and certification, refer to technical literature. This document
contains intellectual property of Mircom. The information is subject to change
by Mircom without notice. Mircom does not represent or warrant correctness
or completeness.
Ordering Information
CATALOG NUMBER 5691
Rev. 1
Description
The RAM-3318-LCD Remote Annunciator is used as
a component of an FX-3318 Fire Alarm System. It
provides an exact mimic of the FX-3318 display at a
remote location.
The display is four lines, 20 characters back-lit
alphanumeric LCD. It displays information regarding
the panel, its circuits, and devices. An on-screen cursor
is controlled by the cursor buttons for menu selection
and control.
Features
• New durable membrane tactile switches
• 4 line, 20 character back-lit alphanumeric LCD
display.
• Common feature LEDs and push buttons.
• Alphanumeric keypad for the LCD.
• Each RAM-3318-LCD has its own address.
Addresses available are 1 to 7 inclusive.
• Cursor buttons for menu selection and control.
• Mounted using one of the BB-1000 or series
semi-flush enclosures.
Electrical Ratings
Power Limited Nominal Voltage: 24 VDC
Current Consumption:
Standby: 70 mA
Alarm: 100 mA
REMOTE LCD ANNUNCIATOR RAM-3318-LCD
Model Description
RAM-3318-LCD Remote LCD Annunciator
Some enclosures require the installation of the
CH-1074B, included with the RAM-3318-LCD