Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
■
ZV-3050 REV 0 09/02/14
4100-TRM, 4101-TRM
Naru™ Trim Series
Operation & Maintenance Manual
Model Numbers Specifications
4100-TRM Valve Trim
4101-TRM Shower Trim
Shower trim includes shower escutcheon kit and 3 mode
showerhead with standard 2.5 gpm (9.5 L/min) ow
restrictor. Valve trim includes shower escutcheon kit only.
Components made from metal and nonmetallic materials
plated in standard polished chrome nish.
Modifications Compliance
-1.5 1.5 gpm (5.7 L/min) flow restrictor
-2.0 2.0 gpm (7.6 L/min) flow restrictor
-412HSB 30" slide bar in place of wall cradle on
hand shower units
-PNL Polished nickel finish
-STN Satin nickel finish
-ASME A112.18.1; CSA B125.1
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Note: Append appropriate -sufx to model number.
c
2
Dimensions
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
■
ZV-3050 REV 0 09/02/14
Measurements
A Ø 2 1/4", 57 mm
B 4 7/8", 124 mm
C 8 1/4", 210 mm
D Ø 7 1/2", 191 mm
E 77", 1956 mm
F 3 1/2", 89 mm
G 42", 1067 mm
H 2 1/4", 57 mm
I 3", 76 mm
J(Rough in)
2 3/8" ± 1/2", 60 mm ± 13 mm
Notes:
1) All dimensions measured from nominal rough-in (see J as reference).
2) Dimensions are subject to change without notice.
FF
A
B
B
D
D
G
G
E
E
C
C
H
H
I
I
J
J
Floor
Floor
3
Parts Breakdown
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
■
ZV-3050 REV 0 09/02/14
Replacement Parts
Item Description Part Number
A Showerhead 412SH
B
C
Flange
Shower Arm 300
D
I
Handle
Set Screw T-567
E Dome Cover T-544
F
G
H
Shower Escutcheon
Mounting Screws
Mounting Plate
T-273-NS-K002
Note:
1) Append -PNL to part number for polished nickel
nish; -STN for satin nickel.
2) Append -1.5 or -2.0 to showerhead for low ow.
Required for Installation
Adjustable wrench
Phillips head screwdriver
Allen wrench (3/16")
Plumber tape
B
G
C
EF
H
D
A
I
4
Installation
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
■
ZV-3050 REV 0 09/02/14
Note:
For valve body installation, please
see valve body installation guide.
1) Install large plastic mounting
plate (H) to shower valve
(4000-BODY). Secure with two
screws (G).
2) Attach shower escutcheon (F) to
large plastic mounting plate (H).
Note: Tabs should snap into place.
3) Install dome cover (E) to valve by
turning clockwise.
4) Install shower handle (D) to
valve. Secure handle by
tightening set screw (I).
Note: Handle should be facing the
12 o'clock position.
5) Attach shower arm
(C)
and ange
(B)
to vertical shower pipe turning
clockwise to tighten.
6) Install showerhead
(A)
to shower
arm
(C)
turning clockwise to
tighten.
1
2
G
H
FH
1
2
E
1
2
A
C
1
2
C
B
1
I
2
D
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Symmons 4106-STN Installation guide
-
Symmons 4405-STN Installation guide
-
-
Symmons 4503-STN-TRM Installation guide
-
-
-
Symmons 4401-STN Installation guide
-
-
-