EchoMaster P-BUA-SUPER DUTY Wiring Harness for Backup Alarm 2017-2021 Ford Super Duty Pickup Operating instructions

Hello! I'm here to assist you with information about the EchoMaster P-BUA-SUPER DUTY wiring harness and its compatible backup alarms, BUA-97C and BUA-97WNC. I've reviewed the installation manual and can help you with details about the installation process, required tools, and compatible accessories. Feel free to ask any questions you have about the wiring harness or alarms, and I'll gladly provide answers based on this document.
What tools are required for installation?

What backup alarms are compatible with this harness?

Where is the OEM connector located?

Wiring Harness for Backup Alarm

2017-2021 Ford Super Duty Pickup

INSTALLATION MANUAL

P-BUA-SUPER DUTY

Thank you for purchasing the

P-BUA-SUPER DUTY

• Vehicle Specific Wire Harness (P-BUA-SUPER DUTY)

2

WHAT’S INCLUDED:

Table of Contents

Page 3 - Tools Required For Installation

• 97dB Backup Alarm (BUA-97C)

• 97dB White Noise Backup Alarm (BUA-97WNC)

COMPATIBLE ACCESSORIES:

3

TOOLS REQUIRED:

1. 10mm Nut-setter

2. Impact Drill

3. Diagonal Cutters

1. 2. 3.

STEP 1:

Locate the OEM inline connector that is on

the inside of the passenger side frame rail

4

STEP 2:

Unplug the OEM connector and install the

P-BUA-SUPER DUTY harness between the

OEM connectors

STEP 3:

Route the harness over the top side of the frame rail, toward the curb side of the truck

5

STEP 4:

Use an impact drill and 10mm nut-setter to

install a compatible backup alarm on the

underside of the vehicle

Note: (2) 10mm TEK screws are provided

with the compatible backup alarm

STEP 6:

Test the backup alarm

STEP 5:

Plug the backup alarm connector into the mating connector on the P-BUA-SUPER

DUTY harness. Secure any excess wiring with cable ties. Use diagonal cutters to

remove excess cable tie material.

Phone – 866-766-2267

E-Mail – [email protected]

EchoMaster is a Power Brand of AAMP Global

EchoMaster.com

/

Related papers

Other documents