FLEXCO 940 Belt Cutter IOM Operating instructions

Brand
FLEXCO
Model
940 Belt Cutter IOM
Type
Operating instructions

FLEXCO 940 Belt Cutter IOM Below you will find brief product information for FLEXCO 940 Belt Cutter IOM. This device is designed to help you make accurate and consistent cuts in conveyor belts, which can help to improve belt life and reduce maintenance costs. The cutter is also safer than utility knives, as the blade edge is protected during the cutting process. The 940 Series Belt Cutter can work on belt thicknesses from 1/2 to 1-7/16" (13 to 37mm) and belt types such as thinner PVC/PVG and rubber ply belts (not including steel cable). The quick-clamp feature makes it easy to position the cutter on the belt, and the 8-point handles provide for adequate clamping pressure. The cutter is also portable, with a carrying handle for convenience. Some possible use cases for the FLEXCO 940 Belt Cutter IOM include:

FLEXCO 940 Belt Cutter IOM Below you will find brief product information for FLEXCO 940 Belt Cutter IOM. This device is designed to help you make accurate and consistent cuts in conveyor belts, which can help to improve belt life and reduce maintenance costs. The cutter is also safer than utility knives, as the blade edge is protected during the cutting process. The 940 Series Belt Cutter can work on belt thicknesses from 1/2 to 1-7/16" (13 to 37mm) and belt types such as thinner PVC/PVG and rubber ply belts (not including steel cable). The quick-clamp feature makes it easy to position the cutter on the belt, and the 8-point handles provide for adequate clamping pressure. The cutter is also portable, with a carrying handle for convenience. Some possible use cases for the FLEXCO 940 Belt Cutter IOM include:

www.flexco.com
www.flexco.com
Cut Safer & Smarter, Not Harder
940 SERIES
Belt Cutter
The speed in which a repair can be completed on a conveyor belt can mean the difference between hitting a
deadline and falling just short. Designed with workplace safety in mind, the 940 Series Belt Cutter ensures your
working conditions are safe, all while producing repairs with long-term effectiveness. And, when you compare the
cost of using Flexco’s belt maintenance tools to the time and money that is lost to belt repairs and maintenance
accidents, the choice is clear. Don’t let unexpected incidents bring your belts to a standstill and eat into your
operation’s bottom line. Turn to the high-quality tools from Flexco for a more secure and profitable solution to your
conveyor belt maintenance processes.
Features and Benefits
• Accurate and consistent cuts. A properly squared belt discourages mistracking and splice failure, increasing belt life
and reducing maintenance costs.
• Safer than utility knives. Operators are protected from the cutting edge of the blade during the belt cutting process,
minimizing the danger of accidental injury and expediting repairs.
• Works on a range of conveyors. e 940 Series Belt Cutter will work on belt thicknesses from 1/2 to 1-7/16" (13 to 37mm) and
belt types such as thinner PVC/PVG and rubber ply belts (not including steel cable).
• Quick clamp feature. By aligning the clamp beam in the uprights, the clamp beam can more easily drop into position.
• Easy to use 8 point handles. Allows for adequate clamping pressure which is acheived with a few turns of both knobs.
• Portable. Carrying handle for convenience.
Longer handles that ratchet
in the vertical plane
Belt-support on each end
for additional support to
guide the belt
Top of the blade is captured
within the clamp beam,
ensuring that a perpendicular
cut is achieved
Symmetrical clamp beam secures both
ends of the belt, to ensure perpendicular
cuts on heavier, thicker belts, reducing
operator effort
Cambered bottom beam and gently
serrated grip surface provides maximum
clamping force, allowing the blade to
cut the belt with precise accuracy
www.flexco.com
Visit www.flexco.com for other Flexco locations and products, or to find an authorized distributor.
©2023 Flexible Steel Lacing Company. 08-09-23. W1697
940 SERIES
Belt Cutter
Ordering Information
Belt Width Ordering
Number
Item
Code
Weight
in. mm Lb. Kg.
48 1200 940-1200 30412 63.7 28.89
64 1600 940-1600 30413 74.4 33.74
72 1800 940-1800 30415 80.4 36.46
80 2000 940-2000 30416 84.6 38.37
96 2400 940-2400 30417 93.0 42.18
Replacement Blade Kit 940CBK 30419 0.14 0.06
Aluminum Content
Aluminum
Alloy Type
Percent (%)
Mg
Magnesium
Ti
Titanium
5052-H32 0.05 2.2-2.8
6061-T6 0.15 .80-1.2
6063-T5 0.10 .45-.90
Ideal for use with Flexco® XP™ Tools
Flexco® XP™ Staple Belt Fastening System
The finished splice has a smooth,
low profile for compatibility with
belt cleaners and other conveyor
components.
Pneumatic
Applicator
Hydraulic
Applicator
XP™ Manual
Applicator Tool
  • Page 1 1
  • Page 2 2

FLEXCO 940 Belt Cutter IOM Operating instructions

Brand
FLEXCO
Model
940 Belt Cutter IOM
Type
Operating instructions

FLEXCO 940 Belt Cutter IOM Below you will find brief product information for FLEXCO 940 Belt Cutter IOM. This device is designed to help you make accurate and consistent cuts in conveyor belts, which can help to improve belt life and reduce maintenance costs. The cutter is also safer than utility knives, as the blade edge is protected during the cutting process. The 940 Series Belt Cutter can work on belt thicknesses from 1/2 to 1-7/16" (13 to 37mm) and belt types such as thinner PVC/PVG and rubber ply belts (not including steel cable). The quick-clamp feature makes it easy to position the cutter on the belt, and the 8-point handles provide for adequate clamping pressure. The cutter is also portable, with a carrying handle for convenience. Some possible use cases for the FLEXCO 940 Belt Cutter IOM include:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI