Oventrop 1132030 Datasheet

Brand: Oventrop

Model: 1132030

Type: Datasheet

2018 Oventrop 1

“Aktor R ST L”

Electromotive rotary actuator for six- way ball valve

Technical information

2 Punkt 0V~ / 0V= - 1 Blue 0V NC not connected

24V~ / 24V= - 2 Browne (V)

24V~ / 24V= - 3 Grey (Y)

NC - 4 Yellow (0)

NC - 5 Green (A)

stetig 0V~ / 0V= - 1 Blue 0V

24V~ / 24V= - 2 Browne (V)

0..10V= - 3 Grey (Y)

0V= - 4 Yellow (0)

0..10V= - 5 Green (A)

stetig 0V~ / 0V= - 1 Blue 0V

24V~ / 24V= - 2 Browne (V)

0..10V= - 3 Grey (Y)

0V= - 4 Yellow (0)

0..10V= - 5 Green (A)

2 Punkt 0V~ / 0V= - 1 Blue 0V

24V~ / 24V= - 2 Browne (V)

24V~ / 24V= - 3 Grey (Y)

NC - 4 Yellow (0)

NC - 5 Green (A)

stetig 2 Punkt

0V~ / 0V= - 1 Blue 0V 0V~ / 0V= - 1 Blue 0V

24V~ / 24V= - 2 Browne (V) 24V~ / 24V= - 2 Browne (V)

0..10V= - 3 Grey (Y) 24V~ / 24V= - 3 Grey (Y)

0V= - 4 Yellow (0) NC - 4 Yellow (0)

0..10V= - 5 Green (A) NC - 5 Green (A)

8 Pkt

100.5

132.5

79.5

“Aktor R ST L” mounted onto the six-way ball valve “Optibal W6”

Connection diagram (proportional / two point)

Dimensions

Accessories: Item no.:

Six-way ball valve “Optibal W6”, DN 15 1132004

Six-way ball valve “Optibal W6”, DN 20 1132006

Kvs oriﬁce set

Oriﬁces (2x per Kvs value), label and cable retainer

(Kvs 0.25 / 0.4 / 0.63 / 1.0 / 1.6 / 2.5) 1132020

Tender speciﬁcation:

Oventrop 24 V electromotive rotary actuator “Aktor R ST L” for

six-way ball valve “Optibal W6”.

Angle of rotation 90° with proportional actuator (0-10 V, split-range-

control or 2 point via 24 V forced control).

Model: Item no.:

“Aktor R ST L”, 24 V AC/DC,

proportional actuator (0-10 V) 1132030

Technical data:

Operating current /

Power consumption: 24 V AC ±10% / 6 VA, or

24 V DC ±10% / 2.6 W

Control signal: 0..10 V DC, or

two point (via 24 V forced control)

Feedback: 0..10 V DC (control via 0..10 V)

Connection: Connecting cable 1,5 m long,

5 x 0.25 mm²

Strain relief: at the casing

Angle of rotation: 90°

Torque: 5 Nm

Floating time: 60 s

Position indication: at the rotary knob

Manual operation: with the current switched off and the

gear disengaged via the rotary knob

Protective system: III

Protection: IP54

Casing: Plastic

Colour: White, grey

Installation position: vertical above the six-way ball valve up

to 90° in any direction

Maintenance: Maintenance-free

Weight: ~ 0,5 kg

Dimensions W x H x D: 78 x 110 x 133 mm

Operating temperature: 0 up to 55 °C (actuator)

Fluid temperature: 0 up to +90°C at the six-way ball valve

Application:

The Oventrop electromotive rotary actuator “Aktor R ST L” is used

for the Oventrop six-way ball valve “Optibal W6” DN 15, item no.

1132004 or DN 20, item no. 1132006.

The rotary actuator and ball valve are used for heating and cooling

operation in a four-pipe system with radiant/chilled ceilings or fan

coils.

They are used for switching between heating and cooling operation

and, in combination with the Kvs oriﬁ ces, for the limitation of the

heating and cooling circuit.

Function:

The electromotive rotary actuator “Aktor R ST L” is used for the

control of the six-way ball valve “Optibal W6”. The combination

consisting of the six-way ball valve “Optibal W6” and the rotary

actuator “Aktor R ST L” is used for:

Switching between heating and cooling operation via a control

signal, two point operation:

Cooling: 0 V

Heating: 10 V or 24 V

Limitation of the heating and cooling circuit via a proportional

control signal 0-10 V:

Cooling: 0 – 4 V

closed: 4 – 6 V

Heating: 6 – 10 V

The current position is transmitted via the 0-10 V output signal

(connections 4 and 5).

The actuator is silent in operation and has a low power consumption.

The rotary movement of the actuator is indicated by the position

indicator at the rotary knob.

With the operating current switched off and the gear disengaged,

manual setting can be carried out with the help of the rotary knob

of the actuator.

Installation advice:

The actuator is screwed onto the six-way ball valve with the help

of the collar nut.

The electrical connection to the centralised building control system

is carried out directly or via a ﬁeld module.

Subject to technical modiﬁ cations without notice.

Product range 3

ti 389-EN/20/MW

Edition 2018

Oventrop 1132030 Datasheet

Oventrop 1132030 Datasheet

Oventrop 1132030 Datasheet

Related papers

Other documents