LED LCD TV
OWNER' S MANUAL
Please READ this manual carefully
before operating your TV, and retain
it for future reference.
LE55K5000A
LE42K5000A
Welcome
Important Information
01 Safety Warnings
2
2
Safety notice
Warning and cautions
3
4
Main Parameter
Base Stand Assembly Instruction
02 Introduction
5
6
Wall Mounting Installation Guidelines
Front Control Panel
7
8
Rear/Side Sockets
8
Connecting to your Haier TV
Common Interface
9
11
Remote Control
03 Remote Control
12
04 Operation
Trouble shooting
05 Trouble shooting
21
Specification 24
06 Specification
Basic Operation
13
Picture MENU
14
Audio MENU 14
Wide Mode MENU 14
Channel MENU 15
Auto Tune 15
Manual Tune 15
Program Edit
15
CI Information 16
Antenna Type 15
Signal Information 16
Time MENU 16
Setup MENU
16
HDMI_CEC
16
System Lock
16
Advance
17
Android Mode
17
Home Menu
17
Application Menu
19
Media Menu
19
Hotel Mode
20
IMPOR
TANT INFORMATION
READ ALL INSTRU
CTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.
FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN
THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF
CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.
THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR
SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE
THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT
DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.
Now you can get star
ted!
01 Safety warnings
Thanks for buying this 42"/55" LED LCD TV. This guide will help you set up and begin using your TV.
55" FULL HD 1080P Digital LED LCD TV
Stand
Remote control
AAA battery x 2
Instruction Manual
Quick start guide
02
42"FULL HD 1080P Digital LED LCD TV
Stand
Remote control
AAA battery x 2
Instruction Manual
Quick start guide
Safety notice
03
Warning: To avoid any injury caused by lean
of the product, please always ensure the
whole product was placed within the table
surface in horizontal.
CAUTION:When the apparatus was in
electrostatic circumstance, it maybe
malfunction and need to reset by user.
Dim:51 5*320 mm(不包 括底座 ）
Warning
High voltages are used in the operation of this
television receiver. Do not remove the cabinet
back from your set. Refer servicing to qualified
service personnel.
Warning
To prevent fire or electrical shock hazard, do
not expose the television receiver to rain or
moisture.
Warning
Do not drop or push objects into the
television cabinet slots or openings. Never
spill any kind of liquid on the television
receiver.
Caution
Do not block the ventilation holes in the back
cover. Adequate ventilation is essential to
prevent failure of electrical components.
Caution
Do not trap the power supply cord under the
television receiver.
Caution
Never stand on, lean on, or suddenly push the
television or its stand. You should pay special
attention to children. Serious injury may result if
it should fall.
Caution
Do not place your television on an unstable cart,
stand, shelf or table. Serious injury to an
individual , and damage to the television, may
result if it should fall.
Caution
When the television receiver is not used for an
extended period of time, it is advisable to
disconnect the AC power cord from the AC
outlet.
Caution
If the television is to be built into a compartment
or similar enclosure, the minimum distances must
be maintained. Heat build-up can reduce the
service life of your television, and can also be
dangerous.
WARNING AND CAUTIONS
04
INSTALLATIONCAUTION
*Locate the TV in the room where light does
not strike the screen directly.
*Total darkness or a reflection on the picture
screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable
viewing.
*Allow enough space between the TV and the
wall to permit ventilation.
*Avoid excessively warm locations to prevent
possible damage to the cabinet or premature
component failure.
*Do not cover the ventilation openings when
using theTV.
Main parameter
Main features
4 NICAM；
5 T ；ime-shift
3
HDMI interface and SCART
Interface；
High luminance, wide viewing
angle；
2
Used as Television, display terminal,
PC display；
1
Never tamper with any components inside the
TV, or any other adjustment controls not
described in this manual. All LED-TV's are high
voltage electrical equipment.
When you clean dust or any water drops off the
SCREEN or CABINET or around any of the
buttons or connectors, the power cabled should
be removed from the power socket. Wipe the TV
with a soft, dry, dust free cloth.
During thunderstorms, unplug the power cable
and aerial / antenna cable to prevent damage to
your TV and any other devices connected to it.
All repairs to this TV should only be performed
by qualified TV service
personnel.
02 Introdution
Introduction
Panel
PAL-B/G ,I , D/K
PAL/SECAM/MPEG2/MPEG4/H.264
AC 100
-
240 V 50/60Hz
Composite video input >=350
YPbPr >=400
TV System
Video Signal System
Input Power Voltage
Power consumption
Standby Power consumption
Audio Output Power(THD ≤ 7%)
Signal Input
Signal output
Horizontal definition (TV line)
SECAM-B/G , D/K , L ,
DVB-T, DVB-C,DVB-T2
1000(DTV);100(ATV)Storage channel number
55"
80W
2x8W
≤0.50W
136W
2x10W
≤0.50W
42"
05
High-Definition Multimedia Interface (HDMI) x 3
AV Input x 1
YPbPr Inputx 1
CI x 1
USB x 3
RF Co-Ax x 1
Headphone x 1
SCART Output x 1
Optical Output x 1
LAN Input x 1
SCART Inputx 1
TF x 1
Audio x 1
Base Stand Assembly Instruction
1. On each desk stand, identify the longer leg of
the stand, and slide the rectangular section of
the desk stands into the TV so that the longer
leg is facing towards the front of the TV.
2. Insert the long screws into the holes in the
rear of the TV that line up with the holes in the
rectangular section of the metal desk stands,
and tighten the screws firmly. You may need to
slightly jiggle the metal base stands around in
their holes to allow the screws to be correctly
seated prior to being tightened.
INSTALLATION NOTES
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
Please do not attempt to rotate the TV on the stand.
Introduction
M4X26MM
(42"/55")
06
WALL MOUNTING INSTALLATION GUIDELINES
2.Use the four screws provided to fix the TV onto a wall mounting bracket (not included)
via the four VESA standard holes on the back of the television.
Introduction
This television can be wall mounted as follows:
1.Place the LED LCD Television onto a solid surface. Please place some soft material over the front of
the screen to protect it from any damage.
200mm
100mm
M6X8MM
M6X8MM
M6X8MM
M6X8MM
( )42"
400mm
200mm
M6X8MM
M6X8MM
M6X8MM
M6X8MM
(55 )"
07
Introduction
1
2
3
Remote control sensor.
Indicator LED:
RED: STANDBY.
Key board.
1
SOURCE
Display the input source menu.
MENU
Display main MENU.
3
4
CH+/CH-
In TV mode,press CH+ or CH- to change
the channel up and down.
In MENU, press CH+ or CH- to select items .
STANDBY
2
V+/V-
Adjust sound level.
In MENU,adjust the item that you selected.
5
Front control panel
3
2
30 30
1
≤8m
SOURCE MENU V- V+ CH- CH+ Standby
1 2 3 4 5
Rear/Side Sockets
1
AC Power Source
2
input
3
HDMI2
input
4
input
5
input
10
TF
input
11
HEADPHONE
input
12
LAN
input
13
14
input
OPTICAL
6
input
YPbPr
AV IN
COMMON INTERFACE(CI)
HDMI3
7
input/output
SCART
8
input
ANT
9
input
USB
HDMI1(ARC)
output
analogue audio output
AC-INPUT
100-240V ~50/60Hz
SCART
LAN
HDMI1(AR C)
HDMI2
OPTICAL
YPbPr
R F
HDMI3
AV IN
COMMON INTERFACE(CI)
USB
HEADPHONE TF
USB
USB
1 2 3 4 5 6 7
8 9 910 12 13 1411
08
Introduction
Connecting to your TV
G Green (Y)
B Blue (Pb/Cb)
W White(AUDIO-L )
R Red (AUDIO-R, Pr/Cr)
Y Yellow (VIDEO)
Audio/Video machine
with HDMI interfaces
AC-INPUT
100-240V~50/60Hz
SCART
LAN
HDMI1(ARC)
HDMI2
OPTICAL
YPbPr
R F
HDMI3
AV IN
COMMON INTERFACE(CI)
USB
HEADPHONE TF
USB
USB
CVBS, DVD Player or other
machine with CVBS/S-Video.
1 WAN2
3
4
Audio Receiver
CVBS, DVD Player or other
machine with YPbPr/YCbCr.
G
R
B
G
R
B
Y
R
W
Y
R
W
Connect USB receiver
to USB slot of the TV
09
Introduction
Connecting a DVD player / Satellite / cable
set top box receiver / games console / PC or
Laptop
There are several options to connecting a DVD
player / Satellite or Cable set top box receiver /
games console / PC or Laptop to your TV.
Option 1 SCART
Connect a SCART cable (not supplied)
from the SCART socket on the TV to the DVD
player cable set top box receiver or
games consol.
To select the device connected with the
SCART cable press the SOURCE button on the
remote and use the▼▲keys to select SCART
and press the OK button.
Note: The TV will default to the SCART
connection when the TV is switched on.
Option 2 HDMI
If the device you want to connect to the
is switched on, switch off the device first.
Connect a HDMI cable (not supplied) from
the HDMI socket on the TV to the DVD player cable
receiver or games consol.
Switch on the device you have just
connected to the TV
To select the device connected with the
HDMI cable press the SOURCE button on the
remote and use the▼▲keys to select HDMI and
press the OK button.
Option 3 AV Audio Visual
(Yellow/White/Red)
Make sure that both TV and the device are
switched off before connecting.
Connect the AV cables (not supplied) from
the Video (yellow) and Audio (white, red)
sockets on the TV to the DVD player or games
console etc.
To select the device connected with the
AV cable press the SOURCE button on the
remote and use the▼▲keys to select AV and
press the OK button.
Option 4 COMPONENT
(Green/Blue/Red)+(White/Red)
Make sure that both TV and the device are
switched off before connecting.
TV
Connect the cables (not supplied) from the
COMPONENT IN sockets Y, Pb, Pr (green,
blue, red) and L-Audio-R (white, red) on the TV
to the DVD player or games console etc.
To select the device connected with the
COMPONENT cable press the SOURCE button on the
remote and use the keys to select and
press the OK button.
Option 5 USB
Most USB sticks can be connected to your TV
and some digital cameras may also work.
Connect USB stick (not supplied) or a USB
cable (not supplied) to the TV.
To select the USB device connected to the TV,
press the SOURCE button on the remote and
use the keys to select USB and press the
OK button.
Note1:Only *.jpg and *.mp3 files will work,
other file types are not guaranteed and may not.
Note 2. Apple iPhones and iPods are not
compatible with your TV.
Note 3. When connecting any device to the USB
connection, keep the USB cable length as short
as possible.
Option 6
Option 7
▼▲
▼▲
YPbPr
LAN INPUT
Connects your TV to the internet router by an Ethernet
cable.This is for future services such as the red
button,and on demand / catch up TV services.
Option 8 OPTICAL OUTPUT
Use an optical cable to connect the TV’s OPTICAL
socket to an external audio receiver’s audio coaxial
input socket.Plug the connected devices into the
mains socket before switching on the TV.
HEADPHONE OUTPUT
Insert the plug of the earphone into the headphone
socket on the TV. The TV speakers are now muted.
Alternatively you can also plug in external speakers if
required.
Connecting to your Haier TV
10
Introduction
The common interface (CI) slot is designed to
accept the conditional Access (CA) Module and
Smart card in order to view the pay TV
programmes and additional services.
Contact your Common Interface service provider
to get more information about the modules and
subscription.
Please noted that CA modules and smart cards
are neither supplied nor optional accessories
from us.
COMMON INTERFACE
Signal / CI Info
Press the MENU button and press the ◀▶ buttons to select
the , then press ▼ to enter the submenu.
Press the ◀▶ buttons to select the CI information.
Channel MENU Channel
Picture Audio Channel TimeWide Mode Setup
Antenna Type Auto Tune Manual Tune Program Edit Signal Information CI Information
11
03 Remote Control
Remote Control
16
17
18
19
20
21
22
23
24
25
26
Insert Batteries into the Remote Control
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the polarity
(+ or -) of the batteries matches the polarity marks inside the unit.
3. Mount the battery cover. Replace with new batteries when the
TV set begins to show the following symptoms:Operation is
unsteady or erratic. Sometimes the TV set does not function
with Remote Control Unit.
Remark:
1) Alkaline Battery Recommeded.
2) Remove batteries when they are exhausted or if the remote
control is not to be used for long time.
SCREEN
Press to change picture aspect ratio.
Press to open the on-screen menu.In teletext
mode,press to open the INDEX page.
Press to navigate the on-screen menu.
Press to confirm a selection.OK
Press to return to the previous screen.In teletext
mode,press to enter mix mode.
(reverse)
(forward)
Press to fast forward or reverse
playback in multimedia mode.
In teletext mode,press to open or close teletext page.
SOURCE
Press to open the input source list.
Press to enter into HOME PAGE.
P
Press to change the channel.
Press to display the channel information.
In teletext mode,press to revealthe hidden
information.
Press to open the channel list.In teletext mode,
press to switch the image to top,bottom or full.
3D WORLD
These models do not support 3D feature.
Press to close the on-screen menu.In teletext
mode,press to exit the teletext mode.
Press to select previous or next file.
(previous)
(next)
Press to stop multimedia playback.
GUIDE
Press to display electronic programme guide
in mode. Press to enter the teletext subpage.DTV
(REC)
Press to record the TV program you are watching
in DTV mode.
Press to play/pause in multimedia mode.(play/pause)
Press to turn the TV on or off.
(Power)
S.MODE
Press to select the sound mode.
P.MODE
Press to select the picture mode.
0-9
Press to enter a channel number
or password.
Q.VIEW
Press to switch to the last viewed
channel.
SLEEP
Press to set the sleep timer.
VOL +/-
Press to adjust the volume level.
(Mute)
Press to turn the sound on or off.
AUDIO(I/II)
Press to select Mono,Nicam stereo
for ATV channel.Select Audio
language for DTV channel.
SUBTITLE
Press to turn the subtitle on or off.
Press to open a favorite channel
list.In teletext mode,press to
hold a page.
12
Operation
04 OPERATION
Power supply to switch on/off this Unit. Before switch on,
ensure that all connections will be proper and correct.
Press Power on/off (at the botton of the rear panel of this
Unit) to turn on/off this Unit. When the power indicator turns
red, this Unit accesses the power on and standby state.
Basic Operation
Press key to start this Unit.The power indicator turns
Press key once again to switch off this Unit.
If there is no signal for the current signal source, this unit will
automatically set to the standby state 10 minutes later.
If not to use the main Unit for a long time, unplug the AC
power cord from the AC outlet.
off.
Select input signal sources
After turn on the main unit, press source to select proper
input source. Press▼▲ buttons to select the main signal
source. Press OK button to confirm.
Setting the OSD Menu
Press MENU button, and the main menu appears. the main
menu display in turn as below:
Picture→Audio→Wide Mode→Channel→Time→Setup
When display of some menu option is gray, it indicates that
such options are not available under the current mode.
General Step for Menu Setup:
●For each main menu, first press▼ to enter the submenu.
●Press ◀▶ to select the desired adjustable option.
●Press ◀▶ to adjust to suitable value.(There is ▶ option
only following such menu, then press ▶ key only)
●After the selection of option is completed, press Menu to
be able to quit the menu.
Installation Guide
The installation guide only appear when the TV first time
turn on or reset to factory set.
1). Press the ▲▼ buttons to navigate the menu and change
the settings. Press the OK button to confirm.
Select your desired language to be displayed on the menu.
Input your password and press confirm to complete.
Note: The default password is 0000.
Home And Shop modes
2). When the unit is turn on for the very first time, it will show
Initialization set-up menu. After the OSD language is set, the
user can choose between "shop mode” and "home mode".
When the screen shows the following setting menu and the
cursor stays on the "home mode" choice, press ◀▶ to adjust,
and "OK" to enter the menu.
If "Home mode" is choosen, the following menu will displayed.
Choose “Cancel” to go back to the Initialization set-up menu.
Choose “OK”to enter the Network menu.
Source
DTV
ATV
AV
SCART
Component
HDMI1
HDMI2
HDMI3
Media
Please select an OSD language
Dutch Russian
Greek
French Italian Spanish German
Romanian
Czech
Polish
Portuguese
Hungarian
English
Arabic
Thai
Password
Please enter new password
Confirm new password
Confirm
Shop Mode
Home Mode
Select the usage mode?
Shop mode is for shop usage only.
Confirm
Are you sure to change to Home mode?
CancelOK
Network
Network
Wired
WI-FI
Confirm
Move Enter Back
OK
Not Connected
Not Connected
Not Connected
Network
Network
Press the ▲▼buttons to select network type,then press the
OK button to enter the submenu. After the Network is set ,
press the ▲▼buttons to select “Confirm” and then press the
OK button to confirm .
DVB Tuning Type
ATV
DTV
3).The following menu will display.Press the ◀ ▶ buttons to
select DTV/ATV and then press the
OK button to confirm.
13
Operation
Antenna Type
DVBC
DVBT
Press the ◀ ▶ buttons to select DVB-T/DVB-C and then press
the OK button to confirm.
a. If you select DVB-T, the next step is to select the country then
press the OK button into the country select menu.
b.If you select DVB-C, the next step is to select the country then
press the OK button into the country select menu.
Are you sure to exit DTV tuning?
YES NO
Auto Tune
Search: 0 DTV 0 Radio 0 Data
VHF CH 0 Freq 0 MHZ
0%
Start Search
Enter Back
OK
6). After tuning is complete, the channels are arranged in a
preset order. If you wish to skip channels, modify the preset
order or rename channels, select Programme Edit under the
channel menu.
Picture Audio Channel TimeWide Mode Setup
Standard VividECO User Mild
4). Channel tuning will commence. This operation may take up
to some minutes . The display will show the progress of the
tuning and the number of channels found.
5). If you want to skip the Auto tuning, press the MENU button
to interrupt the tuning half way.
A pop-up screen will be displayed, press the OK button to to
onfirm. You will then go straight to Network.
1. Picture MENU
1). Press the MENU button and then press the ◀▶ buttons
to select the Picture menu and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu
ECO/Standard/User/Mild/Vivid Mode.
●User Mode:
Picture: You can adjust picture effect here, such as
brightness, color, sharpness etc.
Picture
Contrast 50
Brightness
Color
Sharpness
Tint
Back Light
Image Noise Reduction
Color Temperature
50
50
50
50
100
Weak
Normal
Move Enter Back
OK
2. Audio MENU
1). Press the MENU button and then press the ◀▶ buttons
to select the Audio MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu.
Standard/Music/Theatre/User
Picture Audio Channel TimeWide Mode Setup
Standard Music Theatre User
Audio
Bass 50
Treble
Equilizer
AVC
Surround
SPDIF Output
Balance
50
off
off
PCM
50
Move Enter Back
OK
●User Mode:
Picture: You can adjust picture effect here, such as
brightness, color, sharpness etc.
Sound: You can adjust the sound effect here, such as bass,
treble, balance etc.
3. Wide Mode MENU
1). Press the MENU button and then press the ◀▶ buttons
to select the Wide Mode MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu.
16:9/4:3/Auto/Zoom1/Zoom2/Just Scan
Picture Audio Channel TimeWide Mode Setup
Auto16:9 4:3 Zoom1 Zoom2 Just Scan
14
Country
Iraq
Kuwait
Indonesia
Philippines
Thailand
Iran
Saudi Arabia
Israel
Nigeria
Morocco
Egypt
India Malaysia Pakistan Benin
Country
Iraq
Kuwait
Indonesia
Philippines
Thailand
Iran
Saudi Arabia
Israel
Nigeria
Morocco
Egypt
India Malaysia Pakistan Benin
Operation
4. Channel MENU
1). Press the MENU button and then press the ◀▶ buttons
to select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu.
Antenna Type/Auto Tune/Manual Tune/Program Edit/Signal
Information/CI Information.
4.1 Antenna Type
1). Press the MENU button and then press the ◀▶ buttons
to select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Antenna Type and press
OK to confirm.
3). press the ◀▶ to select Air or Cable.
Picture Audio Channel TimeWide Mode Setup
Antenna Type Auto Tune Manual Tune Program Edit Signal Information CI Information
Antenna Type
Antenna Type
Move Back
Cable
Antenna Type
Antenna Type
Move Back
Air
4.2 Auto Tune
1) press the ◀▶/▼▲ buttons to select the country where
you will operate the TV. Press the OK button to confirm.
2) If "country" is choosen, the following menu will displayed,
then press the ◀▶ buttons to select Full Scan or Quick Scan.
3) press▼ ▲ to select confirm and press OK to Confirm.
4).Channel tuning will commence. This operation may take
up to some minutes . The display will show the progress of
the tuning and the number of channels found.
5). If you want to skip the Auto tuning, press the MENU
button or OK button to interrupt the tuning half way.
A pop-up screen will be displayed, press the OK button to
confirm. You will then go back main menu.
6). After tuning is complete, the channels are arranged in a
preset order. If you wish to skip channels, modify the preset
order or rename channels, select Programme Edit under the
channel menu.
Auto Tune
Search Type Full Scan
Modulation
Symbol Rate
Network ID
Auto
Auto
0
Move Enter Back
OK
Confirm
Modulation Symbol Rate Network ID
Auto Tune
Search: 0 DTV 0 Radio 0 Data
VHF CH0 Freq 0 MHZ
0%
Start Search
Enter Back
OK
4.3 Manual Tune
1). Press the MENU button and then press the ◀▶ buttons
to select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Manual Tune and press
OK to confirm.
3).press▼▲the select Frequency, Modulation, Symbol Rate
etc.
4).press ◀▶ to adjust the value.
5).press ▼▲ to select Search button and than press OK to
Search.
Manual Tune
Frequency 113 MHZ
Modulation
Symbol Rate
Signal Strength
64 QAM
6875
Move Enter Back
OK
Search
DTV: 0 DATA: 0 RADIO: 0
Signal Quality
Program Edit
Move Enter Back
OK
Delete Edit Move Skip
5 five DTV
15 Ch 15 DTV
16 QVC DTV
4.4 Program Edit
1). Press the MENU button and then press the ◀▶ buttons
to select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Program Edit and press
OK to confirm. You can Delete, Rename, Move, Skip, favorite.
● Delete
Press teletext red button, the program is cursor will delete.
● Edit
Only can rename ATV programs.
Move the cursor to the program, press teletext green button
to rename the program.
Press ▼▲ to choose the character, press◀▶to move the
cursor.Press MENU button to exit edit, Press EXIT to exit the
menu.
● Move
Use the Arrow Buttons to select the channel you wish to move.
Then press the Yellow Button to select Move function. Once
active use the Arrow Buttons to move and then press OK to
confirm.
Favorite/
15
Country
Iraq
Kuwait
Indonesia
Philippines
Thailand
Iran
Saudi Arabia
Israel
Nigeria
Morocco
Egypt
India Malaysia Pakistan Benin
Operation
● Skip
Press ▼▲ to choose the program, press teletext blue button to
skip this program, Choose the skipped program, The will
show on the right side of the program. Choose the skipped
program, press blue button again, you can cancel the skip.
The will disappear.
● Favorite
Press ▼▲ to choose the program, press FAV button, it will show
on the side of the program. Choose the FAV program, press
FAV button again, you can cancel the FAV, the will disappear.
Once you favorite group is created, you can press the FAV key
to quickly access your favorite channel.
4.5 Signal Information
1). Press the MENU button and then press the ◀▶ buttons to
select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Signal Information and
press OK to confirm.
4.6 CI Information
1). Press the MENU button and then press the ◀▶ buttons to
select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select CI Information and press
OK to confirm.
On Time/Off Time/Advance
You can adjust Off Time, On Time, Sleep Time etc.
5. Time MENU
1). Press the MENU button and then press the ◀▶ buttons to
select the Time MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu.
Picture Audio Channel TimeWide Mode Setup
On Time Off Time Advance
On Time
On Time Off
Hour
Minute
Source
02 AM
01
Move Enter Back
OK
Channel
DTV
0
Advanced Setting
Sleep Time Off
Auto Sleep
Auto Standby (4hr)
Off
On
Move Enter Back
OK
Time: 1970-1-1 02:01 AM
Off Time
Off Time Off
Hour
Minute
02 AM
01
Move Enter Back
OK
6. Setup MENU
1). Press the MENU button and then press the ◀▶ buttons
to select the Setup MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu.
HDMI_CEC/System Lock/Advance
6.1 HDMI_CEC
1). Press the MENU button and then press the ◀▶ buttons
to select the Setup MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select HDMI_CEC and press OK
to confirm. If the HDMI_CEC is On, you can through the tv
remote control to control the blu-rayplayer. ARC is to select
the sound equipment.
Picture Audio Channel TimeWide Mode Setup
HDMI_CEC System Lock Advance
HDMI_CEC
HDMI_CEC On
ARC
System Standby
On
Off
Move Enter Back
OK
Device List
6.2 System Lock
1). Press the MENU button and then press the ◀▶ buttons
to select the Setup MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select System Lock and press OK
to confirm.
You can lock system, set password, block program and set
parental Guidance, Once you set the lock system on you can
not search the channels or change any programs.
The default pass word is 0000,if you forget the password,
you can sue the super password:9443.
Channel Lock: Press ▼▲ to select Channel Lock and press OK
to confirm.
Parental Lock: Press ◀▶ to choose rating.
System Lock
Input Password
Set Password
Lock System Off
Move Enter Back
OK
Channel Lock
Parental Lock
Parental Guidance
OFF
Move Enter Back
OK
4
5
Channel Lock
15
Move Enter Back
OK
16
17
23
25
Ch 15
DTV
QVC
DTV
bid-up.tv
DTV
TCM
DTV
UK Gold
DTV
16
Operation
6.3 Advance
1). Press the MENU button and then press the ◀▶ buttons
to select the Setup MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Advance and press OK
to confirm. Here are some of the TV set.
Advanced Setting
Menu Time 15 Seconds
Audio Language
2nd Audio Language
Move Enter Back
OK
Language
Subtitle Language
English
English
2nd Subtitle Language
English
English
AD
AD Volume
Hearing Impaired
Shop Mode
Off
35
Switch Mode
Off
Mirroring
On
Blue Screen
PVR File System
On
Restore to Default
Android Mode
Press “OK” to select.
Now you are in the Android Mode.
1) Home Menu.
Tip
Sure you want to exit TV system?
OKCancel
In Home menu you can choose a few here in some app. such
as Play store, YouTube, Twitter, Facebook, Skype,Google etc.
SMARTShare can put you on the phone’s screen shows on TV.
You can choose the System Settings to set the Android system.
Smart Share Manual
If you are in the TV Mode, you can press “BACK” buttons to
go to Android Mode. When you press the “BACK” button, the
following menu will displayed. Also, you can press “ ” button
to goto Android Mode.
Smart Share is a function that allows to share the display of variou
s consumerelectronic devices to a device suchas a N+Smart com
patible televisionwirelessly. This would allow both theN+Smart
compatibletelevision and consumerelectronic deviceto
displayconsumerelectronic device'sscreen at the same time.
Press the OK buttons to enter the Smart Share application
Pressthe▼▲◀▶buttons to select Setting
Press OK buttons and then you can change the name
of television.
Source devices will display the name of consumerelectronic
device that can connect with the television now.
Paired groups will display the consumerelectronic device
that have connected with the televisionbefore.Then you
can use your device to connect with the television.
NOTE:
Consumerelectronic device should support this function.
17
Skype
Operation
1.1 Net
You can choose the Wi-Fi to connect Wi-Fi ,Ethernet.
If you connected Wi-Fi,the Ethernet will closed.
1.2 Sound
You can press the Sound button to change the sound
volumes or close the press sounds.
1.3 Display
You can press the Display button to replace your
Wallpaper or change your Font size type, and video
settings.
1.4 Storage
You can press the Storage button to view the memory
status.
1.5 Apps
You can press the Apps button to view your install apps.
1.6 Location
You can check your local services.such as google Location
reporting.
1.7 Security
You can Make passwords visible, view or deacticate device
administrators, and allow installation of apps from
unknown sources.
1.8 Language & input
You can reset your OSD language,this functions are about
language, Keyboard etc, and you can go to your habits.
1.9 Backup & reset
You can Back up app data, Wi-Fi passwords, and other
settings to Google servers.
If you want to make your system to reset to defaults, you
can press the Factory data reset.
Warning: , please backup your personal data.evenow
18
Operation
1.10 System Update
Here you can upgrade your system by Local update or
Net update.
1.11 Add account
You can add an account at this point.
1.12 Date & time
Here is some of time Settings, you can go to your habits.
1.13 About TV
Here is some version info,such as Model number, Android
verdion, Kernel version, Build number.
2) Application Menu
There are some Apps, you can choose your like application,
and press Ok button to open it.
3) Media Menu
You can insert your USB storage device, you can browse
your pictures, music, video on TV.
N+Smart Manual
N+Smart is a function that allows various consumerelectronic
devices to share content with each other acrossa standard
home network. This would allow a device suchas aN+Smart
compatible television to play music or viewvideos or photos
stored on a desktop computer or thecompatible device.
Press the OK buttons to enter theN+Smart application.
Pressthe ▼▲ buttons to select the network N+Smart device,
then press OK buttonto confirm.
Pressthe ▼▲ buttons to select the device, then press OK
buttonto confirm.
The operate step is the same as USB Player.
NOTE:
Consumerelectronic device should support this function.
19
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
