Hitachi 674 Technical Data And Service Manual

Brand: Hitachi

Model: 674

Category: Power routers

Type: Technical Data And Service Manual

This manual is also suitable for

[ NEW FEATURES ]

Lightweight and compact (5.3 kg)

Three-angle adjustable handle

Powerful 2,000 W (3-1/4 HP) motor (M 12VE)

The new M 12VE/12SE models are intended to significantly reduce the size, weight, and price relative to the

existing M 12V2/12SA2 models.

(1) Lightweight and compact (5.3 kg)

(2) Very competitive price

(3) Three-angle adjustable handle

(4) Powerful 2,000 W (3-1/4 HP) motor (M 12VE)

We aim to expand the sales of our routers with this new product.

LIST Nos.

M 12VE: 0674

M 12SE: 0673

Nov. 2009

PRODUCT NAME

Hitachi 12 mm (1/2”) Router

Models M 12VE

M 12SE

x Groove cutting, chamfering

x Window cutting, trimming

x Shaping and pattern cutting

MARKETING OBJECTIVE

APPLICATIONS

SELLING POINTS

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

Sales Division

REMARK:

• For more information about HANDLING INSTRUCTIONS, visit our website at:

http://www.hitachi-koki.com/manual_view_export/

• Throughout this TECHNICAL DATA AND SERVICE MANUAL, a symbol(s) is(are) used in the place of

company name(s) and model name(s) of our competitor(s). The symbol(s) utilized here is(are) as follows:

Competitors

Symbols Utilized

Company Name Model Name

C1 3612C

MAKITA

3612

D1 DW 625E

DEWALT

DW 624

CONTENTS

Page

SELLING POINTS -------------------------------------------------------------------------------------------------------------- 1

SPECIFICATIONS -------------------------------------------------------------------------------------------------------------- 3

1. Specifications------------------------------------------------------------------------------------------------------ 3

2. Optional Accessories -------------------------------------------------------------------------------------------3

COMPARISON WITH SIMILAR PRODUCTS---------------------------------------------------------------------------- 4

1. Comparison of Specifications

-------------------------------------------------------------------------------------------------------- 4

PRECAUTIONS ON SALES PROMOTION ------------------------------------------------------------------------------ 5

1. Safety Instructions

------------------------------------------------------------------------------------------------------------------------- 5

2. Special Precautions---------------------------------------------------------------------------------------------- 5

REPAIR GUIDE------------------------------------------------------------------------------------------------------------------ 6

1. Precautions on Disassembly and Reassembly

--------------------------------------------------------------------------- 6

STANDARD REPAIR TIME (UNIT) SCHEDULES-------------------------------------------------------------------- 12

Assembly Diagram for M 12VE

Assembly Diagram for M 12SE

-1-

[How to adjust the angle of the handle]

(1) Loosen the handle-mounting screw.

(2) Adjust the angle of the handle.

(3) Tighten the handle-mounting screw.

Lightweight and compact (5.3kg)

The Model M 12VE is designed to reduce weight and size by 1.0 kg (in mass) and 30 percent (in volume),

respectively, compared with the existing Model M 12V2.

HITACHI

New Models Present Models

Model

M 12VE M 12SE M 12V2 M 12SA2

C1 C2 D1 D2

Weight

(Measured

data)

5.3 kg

(11.7 lbs.)

5.3 kg

(11.7 lbs.)

6.3 kg

(13.9 lbs.)

6.2 kg

(13.7 lbs.)

6.0 kg

(13.2 lbs.)

5.8 kg

(12.8 lbs.)

6.0 kg

(13.2 lbs.)

6.0 kg

(13.2 lbs.)

Weight

(Catalog

data)

5.3 kg

(11.7 lbs.)

5.3 kg

(11.7 lbs.)

6.7 kg

(14.8 lbs.)

6.6 kg

(14.6 lbs.)

6.0 kg

(13.2 lbs.)

5.8 kg

(12.8 lbs.)

5.1 kg

(11.2 lbs.)

5.1 kg

(11.2 lbs.)

Three-angle adjustable handle

The handle of this product is adjustable at three tilting angles. The user can adjust the handle at an angle

that is most convenient for work.

SELLING POINTS

Handle

Handle-mounting

screw

Visible outline of existing Models M 12V2/SA2

142

(

M 12V2/SA2

)

191 (M 12V2/SA2)

166 (reduced by 25 mm)

112 (reduced by 30 mm)

320

(

M 12V2/SA2

)

300 (reduced by 20 mm)

-2-

Powerful 2,000 W (3-1/4 HP) motor (M 12VE)

In order to reduce both weight and price, the new model incorporates an armature fan made of resin, unlike

the one made of aluminum in the existing model. The use of the resin fan lowers the armature’s moment of

inertia, which is a factor in increasing cutting efficiency. Therefore, the new model is somewhat inferior to the

existing Model M 12V2 in terms of cutting efficiency for heavy cutting work as shown in the figure below.

However, the new model can provide cutting efficiency equivalent to that of the existing model and higher

than that of the C1 in the practical working range of relatively light cutting work because it adopts a motor

having the same rated power (2,000 W) as that of the existing model, while achieving a significant weight

reduction.

Hitachi

New Models

Present Models

Model

M 12VE M 12SE M 12V2 M 12SA2

C1 C2

Armature’s moment of

inertia

x 10

-3

N•m [x 10

-4

(kg-cm)]

3.0 3.0 4.6 4.6 3.6 3.6

2 2.5 3 3.5 4 4.5

Hitachi M 12V2

Hitachi M 12VE

Test conditions

Groove cutting

Workpiece:MDF

Bit used: Straight bit Dia.12 mm

Cutting depth:10mm

Cutting speed (m/min)

Feeding force N (kg)

Practical working range

Graph of usable feeding force vs cutting speed

20 (2) 20 (2)

20 (2) 25 (2.5) 30 (3) 35 (3.5) 40 (4) 45 (4.5)

-3-

1. Specifications

Model M 12VE M 12SE

Collet chuck capacity 12 mm and 8 mm (1/2” and 1/4”)

Type of power source AC single-phase 50 Hz or 60 Hz

Type of motor AC single-phase commutator motor

Voltage and input

No-load speed 8,000 to 22,000 min

-1

22,000 min

-1

Enclosure

• Housing ---------------------------------- Polycarbonate resin (15 % glass)

• Top cover -------------------------------- Polycarbonate resin

• End bracket ----------------------------- Die-cast aluminum alloy

• Base -------------------------------------- Die-cast aluminum alloy

• Handle------------------------------------ Polycarbonate resin

Type of switch Dustproof snap switch

Weight 5.3 kg (11.7 lbs.) 5.3 kg (11.7 lbs.)

Height (min.-max.)

235 mm (9-1/4”) – 300 mm (11-13/16”)

Standard accessories

2. Optional Accessories

Dust collector set Straight guide Fine ajustment knob

SPECIFICATIONS

Voltage (V) Current (A) Input (W)

110 15.0 1,570

120 15.0 1,700

127 14.2 1,700

220 9.6 2,000

230 9.2 2,000

240 8.8 2,000

Parallel guide

1 Qty.

Collet chuck

(12 mm or 1/2”) 1 Qty.

Template guide (M18)

1 Qty.

Collet chuck (1/4”)

[UK, North/Central America] 1 Qty.

Wing bolt (M6 x 15)

2 Qty.

23 mm Wrench

1 Qty.

Case

[North America] 1 Qty.

Voltage (V) Current (A) Input (W)

110 15.0 1,570

120 15.0 1,700

127 14.2 1,700

220 8.1 1,700

230 7.8 1,700

240 7.5 1,700

-4-

1. Comparison of Specifications (Superior specifications: )

Maker HITACHI

Model name M 12VE M 12SE M 12V2 M 12SA2

C1 C2 D1 D2

USA HP 3-1/4 – 3-1/4 – 3-1/4 – 3 –

Power

Others W 2,000 1,700 2,000 1,700 1,850 1,650 2,000 1,600

No-load speed min

-1

8,000 to

22,000

8,000 to

22,000

9,000 to

23,000

22,000

8,000 to

20,000

22,000

Variable speed – Yes No Yes No Yes No Yes No

Soft start – Yes No Yes No Yes No Yes No

Constant speed – Yes No Yes No Yes No Yes No

Stroke capacity mm 65 (2-9/16”) 65 (2-9/16”) 60 (2-3/8”) 62 (2-7/16”)

Quick & fine cutting

adjustment

–No Yes No Yes

Angle adjustable

handle

– Yes No No No

Speed control dial

position

– Top cover – Handle – Top cover – Top cover –

Height (Min. to Max.) mm

235 to 300

(9-1/4” to 11-13/16”)

255 to 320

(10” to 12-19/32”)

237 to 297

(9-21/64” to 11-11/16”)

231 to 295

(9” to 11-39/64”)

Weight

(measured data)

5.3

(11.7 lbs.)

5.3

(11.7 lbs.)

6.3

(13.9 lbs.)

6.2

(13.7 lbs.)

6.0

(13.2 lbs.)

5.8

(12.8 lbs.)

6.0

(13.2 lbs.)

6.0

(13.2 lbs.)

D mm 180 (7-3/32”) 180 (7-3/32”) 160.5 (6-5/16”) 170 (6-11/16”)

H mm 70 (2-3/4”) 70 (2-3/4”) – 59 (2-5/16”)

Base

configuration

COMPARISON WITH SIMILAR PRODUCTS

-5-

1. Safety Instructions

In the interest of promoting the safest and most efficient use of the Model M 12VE and M 12SE

Routers by all of our customers, it is very important when concluding a sale that the salesperson

carefully ensure that the buyer seriously recognizes the importance of the Handling Instructions,

and fully understands the precautions listed on the caution plate attached to each tool.

A. Handling instructions

Although every effort is made in each step of design, manufacture, and inspection to provide

protection against safety hazards, the dangers inherent in the use of any electric power tool cannot

be completely eliminated. Accordingly, the Handling Instructions list general precautions and

suggestions on the use of electric power tools, and specific precautions and suggestions on the use

of the Router to enhance the safe, efficient use of the tool by customers. Salespersons must

therefore be thoroughly familiar with the Handling Instructions in order to offer appropriate guidance

to customers during sales promotion activities.

B. Caution plate

(1) The following cautions are listed on the Name Plate attached to the main body.

[ For the USA and Canada ]

[ For Australia, New Zealand, Asia and South Africa ]

2. Special Precautions

The Handling Instructions and caution plate describe precautions on using this router. However,

salespersons should instruct customers to strictly observe the following precautions that require

special attention:

(1) Groove cutting (for a cutting depth of 20 mm or more) with a straight bit must be performed in

several times because the bit generates large recoil force during cutting.

(2) Excessively high feeding speed may not only damage the motor and/or the bit, but may also

roughly cut surfaces. A feeding speed too low may leave traces of burn on cut surfaces.

(3) The parallel or straight guide must be attached on the right side facing the feeding direction of

the router. Attaching the guide on the left side will increase the recoil force of the bit and may

result in sloppy cutting.

(4) The collet chuck must always be tightened after the bit is inserted. Tightening the collet chuck

without the bit being inserted may deform the collet chuck and disable bit insertion.

(5) After tightening the collet chuck, make sure that the lock pin returns to its original position. Using

the router with the lock pin engaged with the armature shaft may damage the lock pin and

armature shaft.

PRECAUTIONS ON SALES PROMOTION

-6-

Before disassembly, always disconnect the power cord from the power source. Also be sure to remove the

bit from the router to prevent personal injury and avoid damaging the cutting edge.

1. Precautions on Disassembly and Reassembly

[Bold] numbers in the description below correspond to item numbers in the Parts List and exploded view

assembly diagram for the Model M 12VE; <Bold> numbers correspond to those in the Parts List and

exploded view assembly diagram for Model M 12SE.

1. Disassembling the Base

(1) Place the main body with the Base [68] <64> positioned at the bottom.

(2) Fix Lever (A) [58] <54> in place.

(3) Remove Screw M8 [51] <47> with a 13-mm wrench.

(4) Loosen Lever (A) [58] <54>, and then remove the Base [68] <64> from the main body. Because the

Springs [41] <37> and [55] <51> are contained inside the columns on the base, firmly hold the handle to

support the main body when removing the base.

2. Disassembling the Top Cover

(1) Loosen the two Tapping Screws (W/Flange) D4 x 20 (Black) [7] <4>, and then remove the Top Cover [1] <1>.

Base [68] <64>

Screw M8 [51] <47>

Spring [55] <51>

Disassembly

REPAIR GUIDE

Lever (A)

[58] <54>

Spring [41] <37>

Fig. 1

Fig. 2

Tapping Screw

(W/Flange) D4 x 20

(Black) [7] <4>

Top Cover [1] <1>

HOUSING ASS'Y [36] <32>

-7-

3. Disassembling the Armature and End Bracket

(1) Remove the Carbon Brush [29] <25>.

(2) Loosen and remove the Tapping Screw D5 x 50 [60] <56>.

(3) While being careful to prevent the Magnet [10] from touching the Stator, remove the Armature [39] <35>

and End Bracket [45] <41> from the Housing Ass’y [36] <32>. Because the Magnet [10] (left-hand

screw) is fragile, handle it very carefully (only applicable to the Model M 12VE).

(4) Remove the Lock Piece [56] <52> located inside the End Bracket [45] <41>.

(5) While being careful not to drop the Magnet [10], remove the Magnet [10] (left-hand screw) from the

Armature [39] <35> with a 14-mm wrench. (This step only applies to the Model M 12VE.)

(6) Loosen the three Machine Screws (W/Washers) M4 x 12 (Black) [64] <60>, and then remove the Bearing

Cover [63] <59>, Pushing Button [66] <62>, and Lock Spring (A) [65] <61>.

(7) While being careful not to drop the core of the Armature [39] <35>, secure the Armature [39] <35> with a

vice.

(8) Use a wrench to turn the Thrust Nut [62] <58> counterclockwise and remove it.

(9) Use a hand press to remove the Armature [39] <35> from the End Bracket [45] <41>.

NOTE: This router is designed to minimize imbalance of the armature in order to reduce vibration.

Therefore, handle the armature very carefully.

Carbon Brush [29] <25>

Housing Ass’y

[36] <32>

Magnet [10]

rmature [39] <35>

End Bracket [45] <41>

Lock Piece [56] <52>

Thrust Nut [62] <58>

Bearing Cover [63] <59>

Lock Spring (A) [65] <61>

Pushing Button [66] <62>

Machine Screw (W/Washers)

M4 x 12 (Black) [64] <60>

Tapping Screw

D5 x 50 [60] <56>

Fan Guide [38] <34>

Fig. 3

-8-

4. Disassembling the

(1) Remove the Controller [9]. (This step only applies to the Model M12VE.)

(2) Loosen the two Tapping Screws D4 x 16 [11] (or two Tapping Screws D4 x 12 <9> [for the Model M 12SE]),

and then remove the Mp Holder [12] (only for the Model M 12VE) and Bearing Bushing [13] <10>.

(3) Remove the Brush Terminals [33] <29> of the Stator Ass’y [34] <30> from the Brush holder.

(4) Pick up the Switch Holder [24] <21> with the Switch [26] <23> mounted from the Housing Ass’y [36]

<32>, loosen the screw fixing the switch terminal, and then remove the lead wires.

(5) Loosen and remove the two Hex. Hd. Tapping Screws D5 x 70 [35] <31>.

(6) Place the Housing Ass’y [36] <32> so that the end to be fitted to the End Bracket [45] <41> faces down,

and then lightly tap the end face with a wooden or plastic hammer to remove the Stator Ass’y [34] <30>

Tapping Screw

[11] <9>

Controller [9]

Mp Holder [12]

Bearing Bushing

[13] <10>

Switch [26] <23>

Switch Holder

[24] <21>

Housing Ass’y [36] <32>

Stator Ass’y [34] <30>

Brush Terminal [33] <29>

Fig. 4

-9-

M 12SE

Precautions on reassembly: For reassembly, reverse the order of the disassembling procedures, and be

sure to follow the precautions below.

1. Internal Wiring

(1) Be careful to prevent the lead wires from being caught between the housing assembly and top cover.

(2) Perform wiring carefully to prevent the lead wires from touching the conmitator of the armature.

M 12VE

Reassembly

Switch Holder <21>

Switch <23>

Controller [9]

Magnet pickup

Dial

Switch [26]

Switch Holder [24]

Fig. 6

Fig. 5

-10-

x M 12SE

2. Wiring diagram

3. Assembling the Switch Unit

(1) When attaching the Switch [26] <23> to the

Switch Holder [24] <21>, be sure to tighten the

M12x1 lock nut with torque of 0.6 r 0.15 N•m

(6.5 r 1.5 kgf•cm).

(2) When mounting the Switch [26] <23> and

Switch Holder [24] <21>, insert the lever of the

switch correctly into the hole on the Lever [37]

<33>.

x M 12VE

Red

Switch

White

Black

Stator

rmature

Stator

Dial

Power source

Control circuit

ass’y

Switch

Stator

rmature Power source

Noise Suppressor

For UK, Europe, South Africa,

China, Taiwan

Fig. 7

Fig. 8

Fig. 9

Lever of switch

Switch [26] <23>

Lever

[37] <33>

D12 internally toothed lock washer

Switch Holder [24] <21>

M12 x 1 lock nut

Magnet

pickup

-11-

4. Parts Requiring Lubrication and Type of Lubricant

x Hitachi Motor grease No. 29

•Spring [41] <37>, Spring [55] <51>

5. Tightening Torques for Fastening Screws and Bolts

• Tapping Screw D4 x 12 (M 12SE) <9>

䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏

2.0 r 0.5 N•m (20 r 5 kgf•cm)

• Tapping Screw D4 x 16 [11] [19] <16>

䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏

2.0 r 0.5 N•m (20 r 5 kgf•cm)

• Tapping Screw (W/Flange) D4 x 20 (Black) [7] <4>

䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏

2.0 r 0.5 N•m (20 r 5 kgf•cm)

• Tapping Screw D5 x 50 [60] <56>

䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏

2.9 r 0.5 N•m (30 r 5 kgf•cm)

• Hex. Hd. Tapping Screw D5 x 70 [35] <31>

䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏

2.9 r 0.5 N•m (30 r 5 kgf•cm)

• Machine Screw (W/Washers) M4 x 8 (Black) [47] <43>

䱏䱏䱏䱏䱏䱏䱏

1.8 r 0.4 N•m (18 r 4 kgf•cm)

• Machine Screw (W/Washers) M4 x 12 (Black) [64] <60>

䱏䱏䱏䱏䱏䱏

1.8 r 0.4 N•m (18 r 4 kgf•cm)

• Machine Screw (W/Washers) M6 x 10 [59] <55>

䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏

4.9 r 1.0 N•m (50 r 10 kgf•cm)

• Machine Screw (W/Washers) M6 x 30 (Black) [42] <38>

䱏䱏䱏䱏䱏䱏

4.9 r 1.0 N•m (50 r 10 kgf•cm)

• Seal Lock Flat Hd. Screw M5 x 14 [70] <66>

䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏

3.4 r 0.7 N•m (35 r 7 kgf•cm)

• Hex. Socket Set Screw M5 x 8 [23] <20>

䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏

0.75 r 0.25 N•m (7 r 2.5 kgf•cm)

• Nut M5 (Black) [53] <49>

䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏

3.4 r 0.7 N•m (35 r 7 kgf•cm)

• Screw M8 [51] <47>

䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏

9.8 r 2.0 N•m (100 r 20 kgf•cm)

• Thrust Nut [62] <58>

䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏䱏

17.2 r 2.5 N•m (175 r 26 kgf•cm)

6. Checks after Reassembly

After reassembly, check the following:

(1) Confirm that the Lever [37] <33> and Pushing Button [66] <62> operate smoothly.

7. Insulation Tests

After an overhaul, measure the insulating resistance and test the dielectric strength.

Insulation resistance : More than 7 Mȍ using a DC 500 V megohm tester

Directric strength test : AC 4,000 V applied for one minute, with no abnormalities

220 V to 240 V (110 V for UK products)

AC 3,750 V applied for one minute, with no abnormalities

120 V for USA and Canada products

AC 3,000 V applied for one minute, with no abnormalities

110 V to 127 V (except for UK, USA and Canada products)

8. No-load Current Value

The table below lists the no-load current values measured during no-load operation for 30 minutes.

• M 12VE

Voltage (V) 110 120 127 220 230 240

Current (A) max. 6.8 7.0 7.0 4.2 4.2 4.2

• M 12SE

Voltage (V) 110 127 220 230 240

Current (A) max. 5.5 6.0 3.8 3.7 3.6

9. Product Accuracy

Bit run-out: When a test bar 12 mm in diameter is set, deflection of the bar must be 0.4 mm or less at the

position 100 mm distant from the front end of the chuck.

-12-

MODEL

Variable

Fixed

10 20 30 40 50 60 min.

Work Flow

M 12VE

M 12SE

General assembly

Top Cover

Collet Chuck

Handle (A). (B)

Set

Sub Base

Stopper Block

Lever (A)

Switch

Controller

Cord

Cord Armor

D10.1

Switch Holder

Armature

Rubber Ring

Bearing

Bushing

Ball Bearing

6200VVCMPS2L

Ball Bearing

6004VVCMPS2L

Bearing Cover

Magnet

Mp Holder

End Bracket

Base

Housing Ass’y

Stator Ass’y

STANDARD REPAIR TIME (UNIT) SCHEDULES

Model M 12VE

ROUTER

LIST NO. 0674

(E1)

2009㨯10㨯21

501

506

503

505

504

508

502

507

509

PART

M 12VE

DESCRIPTION REMARKS

1 331-809 TOP COVER 1

* 2 930-039 NOISE SUPPRESSOR 1

FOR EUROPE, AUT, GBR, FIN, DEN, SWE,

NOR, SUI, AUS, NZL, ISR, CHN, SAF

3 930-804 TERMINAL M4.0 (10 PCS.) 1

4 959-141 CONNECTOR 50092 (10 PCS.) 2

5 331-823 MARKER 1

6 325-196 STOPPER POLE (A) 1

7 301-653

TAPPING SCREW (W/FLANGE) D4 X 20 (BLACK) 2

* 8 500-234Z CORD 1 (CORD ARMOR D8.8)

* 8 500-247Z CORD 1

(CORD ARMOR D8.8) FOR AUT, FIN, DEN, SWE, NOR

* 8 500-463Z CORD 1 (CORD ARMOR D8.8) FOR GBR (110V)

* 8 500-435Z CORD 1 (CORD ARMOR 8.8) FOR GBR (230V)

* 8 500-248Z CORD 1 (CORD ARMOR 8.8) FOR SUI

* 8 500-242Z CORD 1

(CORD ARMOR D10.1) FOR USA, CAN, MEX, PAN

* 8 500-237Z CORD 1 (CORD ARMOR D8.8) FOR BRA

* 8 500-439Z CORD 1 (CORD ARMOR D8.8) FOR AUS, NZL

* 8 500-455Z CORD 1

(CORD ARMOR D8.8) FOR CHN, THA, PHI

* 8 500-423Z CORD 1 (CORD ARMOR D8.8) FOR SIN, MAL

* 8 500-234Z CORD 1 (CORD ARMOR D8.8) FOR KOR

* 8 500-474Z CORD 1 (CORD ARMOR D10.1) FOR TPE

* 9 331-810 CONTROLLER 100V-120V 1

* 9 331-811 CONTROLLER ASS'Y 220V-240V 1

10 325-475 MAGNET 1

11 954-004 TAPPING SCREW D4 X 16 2

12 331-822 MP HOLDER 1

13 325-169 BEARING BUSHING 1

14 325-184 RUBBER RING 1

* 15 331-989 INTERNAL WIRE (BLUE) 1

* 15 331-979 INTERNAL WIRE (WHITE) 1 FOR USA, CAN, MEX, PAN (120V)

16 938-307 PILLAR TERMINAL 1

17 980-063 TERMINAL 1

18 937-631 CORD CLIP 1

19 984-750 TAPPING SCREW (W/FLANGE) D4 X 16 2

* 20 953-327 CORD ARMOR D8.8 1

* 20 938-051 CORD ARMOR D10.1 1

21 NAME PLATE 1

22 620-0VV BALL BEARING 6200VVCMPS2L 1

23 938-477 HEX. SOCKET SET SCREW M5 X 8 2

24 331-813 SWITCH HOLDER 1

25 307-887 MACHINE SCREW (W/WASHER) M3.5 X 6 2

* 26 331-812 SWITCH (1P SCREW TYPE) 1

* 26 331-986 SWITCH (1P SCREW TYPE) 1

FOR GBR (110V), USA, CAN, PAN (120V)

* 27 331-820 SCALE 1

* 27 331-821 SCALE 1

FOR GBR, USA, CAN, BRL, PAN, MEX,

AUS, NZL, SAF, MAL, VIE, INA

28 945-161 BRUSH CAP 2

29 999-038 CARBON BRUSH (1 PAIR) 2

30 938-241 BRUSH HOLDER 2

31 HITACHI LABEL 1

32 331-825 LABEL 1

- 2 - 10 - 09

*ALTERNATIVE PARTS

ITEM

NO.

USED

CODE NO.

PART

M 12VE

DESCRIPTION REMARKS

33 937-623 BRUSH TERMINAL 2

* 34 340-659D STATOR ASS'Y 110V-120V 1 INCLUD. 33

* 34 340-659L STATOR ASS'Y 220V-230V 1 INCLUD. 33

* 34 340-659J STATOR ASS'Y 220V-230V 1 INCLUD. 33 FOR BRA, PAN (220V),

ISR, UAE, IND, INA, KOR, SIN, THA, PHI

* 34 340-659M STATOR ASS'Y 240V 1 INCLUD. 33

* 34 340-659K STATOR ASS'Y 240V 1 INCLUD. 33 FOR MAL

35 961-400 HEX. HD. TAPPING SCREW D5 X 70 2

36 331-814 HOUSING ASS'Y 1 INCLUD. 23, 30

37 325-960 LEVER 1

38 331-980 FAN GUIDE 1

* 39 360-886U ARMATURE ASS'Y 110V-120V 1 INCLUD. 21, 60

* 39 360-886E ARMATURE 220V-240V 1

40 325-180 SPRING GUIDE 2

41 303-316 SPRING 1

42 307-443

MACHINE SCREW (W/WASHERS) M6 X 30 (BLACK) 2

43 331-819 HANDLE (A). (B) SET 2

44 301-806 WING BOLT M6 X 15 1

45 331-817 END BRACKET 1

46 323-426 FELT 2

47 317-200

MACHINE SCREW (W/WASHERS) M4 X 8 (BLACK) 1

48 962-569 WASHER (B) 1

49 971-858 SPRING (A) 1

50 302-196 MACHINE SCREW M5 X 20 (BLACK) 1

51 331-824 SCREW M8 1

52 302-197 MACHINE SCREW M5 X 35 (BLACK) 1

53 302-012 NUT M5 (BLACK) 2

54 331-826 STOPPER BLOCK 1

55 303-317 SPRING 1

56 971-848 LOCK PIECE 1

57 325-187 LOCK SCREW M10 1

58 323-923 LEVER (A) 1

59 997-314 MACHINE SCREW (W/WASHERS) M6 X 10 1

60 307-100 TAPPING SCREW D5 X 50 4

61 600-4VV BALL BEARING 6004VVCMPS2L 1

62 325-186 THRUST NUT 1

63 325-185 BEARING COVER 1

64 935-196

MACHINE SCREW (W/WASHERS) M4 X 12 (BLACK) 3

65 325-183 LOCK SPRING (A) 1

66 325-182 PUSHING BUTTON 1

* 67 325-199 COLLET CHUCK 12MM 1

* 67 323-421 COLLET CHUCK 1/2" 1

FOR GBR, USA, CAN, BRA, MEX, PAN,

AUS, NZL, SAF, MAL, THA, INA

68 331-818 BASE 1

69 301-810 SUB BASE 1

70 992-013 SEAL LOCK FLAT HD. SCREW M5 X 14 4

10 - 09 - 3 -

*ALTERNATIVE PARTS

NO.

USED

CODE NO.

ITEM

NO.

M 12VE

DESCRIPTION REMARKS

501 331-816 PARALLEL GUIDE 1

502 301-806 WING BOLT M6 X 15 2

503 947-859 LOCK SPRING 2

* 504 956-756 TEMPLATE GUIDE ADAPTER 1 FOR USA, CAN, BRA, PAN, MEX

505 956-790 TEMPLATE GUIDE D18 1

506 323-295 WRENCH 23MM 1

507 949-234 MACHINE SCREW M5 X 6 (10 PCS.) 2

* 508 325-199 COLLET CHUCK 12MM 1 FOR GBR, USA, CAN,

* 509 331-815 CASE 1 FOR USA, CAN

DESCRIPTION REMARKS

* 601 307-801 COLLET CHUCK 1/2" 1 EXCEPT FOR GBR, USA, CAN, BRA, PAN,

MEX, AUS, NZL, VIE, SAF, MAL, THA

* 602 323-293 COLLET CHUCK 1/4" 1

EXCEPT FOR GBR, USA, CAN, BRA, PAN,

MEX, AUS, NZL, VIE, SAF, MAL, THA

603 997-466 DUST COLLECTION ADAPTER SET 1

604 956-794 TRIMMER GUIDE 1

* 605 331-815 CASE 1 EXCEPT FOR USA, CAN

- 4 - Printed in Japan 10 - 09

(091021N)

*ALTERNATIVE PARTS

OPTIONAL ACCESSORIES

STANDARD ACCESSORIES

NO.

USED

NO.

USED

CODE NO.

ITEM

NO.

ITEM

NO.

Model M 12SE

ROUTER

LIST NO. 0673

(E1)

2009㨯10㨯21

501

506

503

505

504

508

502

507

Page is loading ...

Hitachi 674 Technical Data And Service Manual

Brand: Hitachi

Model: 674

Category: Power routers

Type: Technical Data And Service Manual

This manual is also suitable for

Download PDF

report

Hitachi 674 Technical Data And Service Manual

This manual is also suitable for

Hitachi 674 Technical Data And Service Manual

Related papers

Other documents