A-1
INSTALLATIONWIRE FEEDER WELDERS (125, 140)
TECHNICAL SPECIFICATIONS
125 Amp units (K2479-1, K2513-1, K2696-1, K2699-1, K2785-1)
140 Amp units (K2480-1, K2514-1, K2658-1, K2697-1)
1
If connected to a circuit protected by fuses use Time Delay Fuse marked “D”.
2
Requirements For Maximum Output
In order to utilize the maximum output capability of the machine, a branch circuit capable
of 25 amps at 120 volts, 60 Hertz is required.
INPUT – SINGLE PHASE ONLY
RATED OUTPUT
OUTPUT
Standard Voltage/Frequency
120 V / 60 Hz
Duty Cycle
20% Duty Cycle
Current
90 Amps
Voltage at Rated Amperes
19
Welding Current Range
30-125 Amps
Input Voltage / Frequence
120V 60Hz
Height
13.7 in.
347 mm
Width
10.15 in.
258 mm
Depth
17.9 in.
454 mm
Weight
49.5 lbs.
22.5 kg.
Fuse or Breaker Size
1,2
20 Amp
Input Amps
20
Power Cord
15 Amp, 125 V,
Three Prong Plug
(NEMA Type 5-15P)
Extension Cord
3 Conductor # 12 AWG
(4mm
2
) or Larger
up to 50 ft.(15.2m)
Maximum-Open Circuit Voltage
33 V
Wire Speed Range
50 - 500 in/min.
(1.3 - 12.7 m/min.)
Input Current
20 Amps @ rated output
RECOMMENDED INPUT CABLE AND FUSE SIZES
PHYSICAL DIMENSIONS
INPUT – SINGLE PHASE ONLY
RATED OUTPUT
OUTPUT
Standard Voltage/Frequency
120 V / 60 Hz
Duty Cycle
20% Duty Cycle
Current
90 Amps
Voltage at Rated Amperes
19.5
Welding Current Range
30-140 Amps
Input Voltage / Frequence
120V 60Hz
Height
13.7 in.
347 mm
Width
10.15 in.
258 mm
Depth
17.9 in.
454 mm
Weight
49.5 lbs.
22.5 kg.
Fuse or Breaker Size
1,2
20 Amp
Input Amps
20
Power Cord
15 Amp, 125 V,
Three Prong Plug
(NEMA Type 5-15P)
Extension Cord
3 Conductor # 12 AWG
(4mm
2
) or Larger
up to 50 ft.(15.2m)
Maximum-Open Circuit Voltage
33 V
Wire Speed Range
50 - 500 in/min.
(1.3 - 12.7 m/min.)
Input Current
20 Amps @ rated output
RECOMMENDED INPUT CABLE AND FUSE SIZES
PHYSICAL DIMENSIONS
A-2
INSTALLATIONWIRE FEEDER WELDERS (125, 140)
• .025” -.035”(0.6mm-0.8mm) Dual Groove Drive Roll
(Factory installed .035”(0.9mm) groove ready for flux-
cored process)
• Black Gun Nozzle (Installed on Welding Gun)
• 2”(51mm) Spindle Adapter (For 8”
(203mm) reel of wire)
• Instruction Manual
• How to Weld “DVD”
• Wire Feeder Welder
• Work Cable & Clamp
• Magnum 100L Welding Gun
• (3) .035”(0.9mm) Contact Tips (1 installed on the welding gun)
• Spool of .035”(0.9mm) diameter NR-211MP Innershield Flux-
cored Wire
IDENTIFY AND LOCATE COMPONENTS for 125 AMP UNIT
.035
.035
.035 NR-211 MP
F
L
U
X
-
C
O
R
E
D
W
I
R
E
.
0
2
5
.025 GROOVE
.035 GROOVE
IM
"INSTRUCTION
MANUAL"
DVD
2" SPINDLE ADAPTER (FOR 8" REEL OF WIRE)
OPERATOR’S MANUAL
A-3
INSTALLATIONWIRE FEEDER WELDERS (125, 140)
• Wire Feeder Welder
• Work Cable & Clamp
• Magnum 100L Welding Gun
• (3) .035”(0.9mm) Contact Tips (1 installed on the welding gun).
• (3) .025”(0.6mm) Contact Tips
• Spool of .035”(0.9mm) diameter NR-211MP
Innershield Flux-cored Wire
• Spool of .025”(0.6mm) diameter Super Arc L-56 MIG Wire
• .025” -.035”(0.6mm-0.8mm) Dual Groove Drive Roll
(Factory installed .035”(0.9mm) groove ready for
flux-cored process).
• Black Gun Nozzle (Installed on Welding Gun)
• Brass MIG Gun Nozzle for MIG welding
• 2”(51mm) Spindle Adapter for 8”(203mm) reel of
wire.
• Regulator
• Gas Hose
• Instruction Manual
• How to Weld “DVD”
.025
.025
.025
.035
.035
NR-211 MP
WIRE
L-56 MIG
NR-211 MP
WIRE
L-56 MIG
IM10049
"INSTRUCTION
MANUAL"
DVD
GAS HOSE
REGULATOR
2" SPINDLE ADAPTER (FOR 8" REEL OF WIRE)
IDENTIFY AND LOCATE COMPONENTS for 140 AMP UNIT
.
0
2
5
.025 GROOVE
.035 GROOVE
-
1
-
2
-
3
Lincoln Electric K2514-1 Installation guide
- Category
- Welding System
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Lincoln Electric K5365-2 User manual
-
-
Lincoln Electric 180 User manual
-
-
Lincoln Electric SP140-T User guide
-
-
-
-
-
