2. Daintree
  3. WTS10 Wireless Thermostat

Daintree WTS10 Wireless Thermostat User guide

  • Hello, I've reviewed the Daintree Wireless Thermostat WTS10 Override Guide. This document provides instructions on how to override the auto program and change individual mode settings. I can help with questions about adjusting the temperature, switching between heat/cool and fan modes, and confirming changes described in the document. I am ready to help you with your questions.
  • How to activate the display?
    How to change the Heat and Cool set points?
    How to confirm the mode settings?
    How to select Heat/Cool or Fan mode?
Daintree® Wireless Controls
Wireless Thermostat (WTS10)
LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
Page 1 of 1
(Rev 06/26/2023)
DT100-Daintree-WTS10-Wireless-Thermostat-Override-Guide_R01
Override Guide
Press the or button to activate the display.
Press the to raise or button to lower both the
Heat and Cool set points.
Conrm the settings by pressing the middle button.
Press the or button to activate the display.
Press the button to select Heat/Cool mode;
press the button to select the Fan mode.
Press the or button to select the mode.
When the desired mode appears, press the middle
button to CONFIRM.
Press the button to raise or button to lower
the set point for the currently selected mode.
To change the individual Mode settings:
1
2
2
43
3
1
3
5
1
2
1
2
3
4
5
To override the Auto program:
Mode
LED.com
Phone: +1 888 694 3533
/