Reflex Longtherm Protect Cooling R_B-22 Owner's manual

Brand
Reflex
Model
Longtherm Protect Cooling R_B-22
Type
Owner's manual

This manual is also suitable for

Installation Instructions
Reflex Longtherm Protect Cooling
RE2022en / 9129816 / 12-20
Subject to technical modifications
Reflex Winkelmann GmbH Z Gersteinstraße 19 Z 59227 Ahlen Z
The cold insulation product is available for the following products:
ZReflex Longtherm RLB 14, 22, 31, 34, 60, 110
ZReflex Longtherm RMB 14, 22, 31, 34, 60, 110
ZReflex Longtherm RHB 14, 22, 31, 34, 60, 110
Two cold-insulation systems are required for more than
100 plates.
Reflex Longtherm Protect Cooling is a cold insulation
product for single-pass brazed Reflex Longtherm plate heat
exchangers, that work with refrigerants. It comprises soft foam
that is designed for HVAC systems and whose fire resistance
ensures reliable and safe operation of the entire system.
Technical data
Thermal conductivity
Parameter Value
Min. operating temperature - 40 °C
Max. working temperature 110 °C
Insulation material Elastomer foam
Thickness 20 mm
Temperature Thermal conductivity
0 °C 0.033 W/mK
20 °C 0.035 W/mK
40 °C 0.037 W/mK
Installation
Remove the protective film from a part of the cold
insulation. Position the part with the adhesive surface on
the plate heat exchanger and press it firmly in place.
Continue in the same way with the other parts.
1 Front panel
2 Rear panel
3 Side panel (cut away)
1
2 3
The side panel (3) must be cut dependent on
the number of heating plates.
  • Page 1 1

Reflex Longtherm Protect Cooling R_B-22 Owner's manual

Brand
Reflex
Model
Longtherm Protect Cooling R_B-22
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents