FLEXIHIRE 05412 User manual

Brand
FLEXIHIRE
Model
05412
Type
User manual

FLEXIHIRE 05412 is a powerful floor sander designed for sanding and refinishing wooden floors. It features a 15-amp motor and a wide sanding head for efficient removal of old finishes and smoothing of rough surfaces. The FLEXIHIRE 05412 also comes with a dust collection system to help keep the work area clean. With its adjustable sanding depth and variable speed control, this sander is suitable for a variety of flooring projects, from delicate sanding to heavy-duty removal.

FLEXIHIRE 05412 is a powerful floor sander designed for sanding and refinishing wooden floors. It features a 15-amp motor and a wide sanding head for efficient removal of old finishes and smoothing of rough surfaces. The FLEXIHIRE 05412 also comes with a dust collection system to help keep the work area clean. With its adjustable sanding depth and variable speed control, this sander is suitable for a variety of flooring projects, from delicate sanding to heavy-duty removal.

Safe Operating Procedure
PPE Required
Operators should familiarise themselves with the equipment Only qualified personnel to perform maintenance and repairs
Never operate faulty equipment Check that the power cord does not create a trip hazard
Always turn off tools and disconnect from the power prior to making
any tool/blade changes or lead connections
Do not block airflow to machine as it can cause overheating
Do not operate under the influence of drugs or alcohol Do not use power tools in or near water
Power tools can be very powerful beware of;
•Strong forces on start up
•Very high speeds
•Blades & bits can catch and cause them to kick violently
•Debris being ejected from the work piece
Before starting ensure to;
•Position feet and body in a wide stance
•Hold the tool firmly with both hands
•Plan your cut or work prior to starting
•Ensure the work piece is well secured
Ensure belts and pieces are tightly secured and not worn. Always
disconnect from the power supply when changing belts and pads
During operation;
•Do not apply excessive force let the tool do most of the work
•If you need to apply more force the belt could worn
•Ensure you can not distracted
Do not use power tools in or near water Be careful not to overheat the work piece which could lead to worn
out tools
Do not operate unless the guards are in place Clean up the area after use and coil the lead up
Move the sander around evenly and do not leave in one place Keep both hands firmly on the sander
BEWARE – Never leave equipment unattended with a full dust bag
immediately after use. Ignition can occur from heat and start a fire
•Assess the immediate work area for any hazards
•Control or eliminate all the risks associated with the hazards
•Hazards to check for that may require risk control-
❑Overhead power lines
❑Digging
❑Confined space
❑Traffic & moving machinery
❑Stored energy – air, hydraulic, electricity, pressure
Risk Assessment
❑Working at height
❑Falling objects
❑High Voltage
❑Any stored energy
Floor Sanders & Edger's
Operating Safety Instructions
•Complete pre-start checklist
•Read Manufacturers Operation Manual (www.flexihire.com.au)
•Report any faults or damage to Flexihire 1300FLEXIHIRE
•Do not wear loose clothing or jewellery
•Do not operate equipment near pedestrians or people
•Do not operate without the appropriate PPE as detailed
•Do not operate equipment under the influence of drugs or alcohol
General Safety Instructions
•Ensure all electrical equipment has a current test tag within 3 months
•Do not operate equipment in or around water or damp environments
•It is recommended to use a safety switch to power this equipment
•Ensure the power lead is well stowed and do not present trip hazards
•Isolate the power by removing the plug prior to performing any work
on the equipment including prior to changing leads or tools or bits
General Electricity Safety
FMS10-5.1.3.9.7.2 SOP Floor Sander & Edger
Version #: FLX 3.1
Issue: October 2021
Review: October 2026
  • Page 1 1

FLEXIHIRE 05412 User manual

Brand
FLEXIHIRE
Model
05412
Type
User manual

FLEXIHIRE 05412 is a powerful floor sander designed for sanding and refinishing wooden floors. It features a 15-amp motor and a wide sanding head for efficient removal of old finishes and smoothing of rough surfaces. The FLEXIHIRE 05412 also comes with a dust collection system to help keep the work area clean. With its adjustable sanding depth and variable speed control, this sander is suitable for a variety of flooring projects, from delicate sanding to heavy-duty removal.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents