Stairville TinyBright IP User guide

Brand: Stairville

Model: TinyBright IP

Type: User guide

Stairville TinyBright IP: A versatile LED floodlight for decorative illumination outdoors, featuring IP65 protection against dust and water jets. With its 10W LED, it delivers vibrant colors and a wide 25° beam angle. Connect multiple fixtures via DMX-IP65 connectors for synchronized light shows. The robust aluminum housing ensures durability, while the pressure compensation valve extends the lifespan of the device. Mount it on the ground, hang it, or use the removable ground spike for easy placement.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • inf[email protected]

DocID: 505851_505852_505853_505854_505855_505856_505857_23.07.2021

Safety instructions

Intended use

This device is intended for use as an electronic lighting eect by means of LED tech-

nology. The device is designed for professional use only and is not suitable for use in

households. Any other use or use under other operating conditions is considered to

be improper and may result in personal injury or property damage. No liability will

be assumed for damages resulting from improper use.

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are

not within reach of babies and young children. Choking hazard! Ensure

that children do not detach any small parts from the product. They could

swallow the pieces and choke! Never let children unattended use electri-

cal devices.

Electric shock caused by high voltages inside

Within the device there are areas where high voltages may be present. Never remove

any covers. There are no user-serviceable parts inside. Do not use the device when

covers, safety equipment or optical components are missing or damaged.

Quick start guide

This quick start guide contains important information on the safe operation of the

product. Read and follow the safety advice and instructions given. Retain the quick

start guide for future reference. If you pass the product on to others please include

this quick start guide.

Electric shock caused by short circuit

Do not modify the mains cable or the plug. Failure to do so may result in electric

shock and lead to a re hazard and risk of death. If in doubt, seek advice from a

registered electrician.

Eye damage caused by high light intensity

Never look directly into the light source.

Risk of re

Do not block areas of ventilation. Do not install the device near any direct heat

source. Keep the device away from naked ames.

Power supply

Connect the device directly to the power grid. This device must not be conntected

to a dimmer. Before connecting the device, ensure that the input voltage (AC outlet)

matches the voltage rating of the device and that the AC outlet is protected by a

residual current circuit breaker. Failure to do so could result in damage to the device

and possibly the user. Unplug the device before electrical storms occur and when it

is unused for long periods of time to reduce the risk of electric shock or re.

Features

• LED oodlight for decorative illumination for outdoor use due to degree of

protection IP65

• Removable ground spike

• Pressure compensation valve for long lifetime

• Robust and elegant housing of aluminium

Connections

Technical specications

Light source: 1 × LED 10 W red (item no. 505851)

1 × LED 10 W green (item no. 505852)

1 × LED 10 W blue (item no. 505853)

1 × LED 10 W white (item no. 505854, 505857)

1 × LED 10 W UV (item no. 505855)

1 × LED 10 W amber (item no. 505856)

Beam angle: 25°

Colour temperature: 3000 K (item no. 505854), 5600 K (item no. 505857)

Colour rendering index: CRI 80 (item no. 505854, 505857)

For the packaging, environmentally friendly materials have been chosen that can be supplied

to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not

just dispose of these materials with your normal household waste, but make sure that they

are collected for recycling. Please follow the notes and markings on the packaging.

This product is subject to the European Waste Electrical and Electronic Equipment Directive

(WEEE) in its currently valid version. Do not dispose with your normal household waste. Dis-

pose of this device through an approved waste disposal rm or through your local waste fa-

cility. When discarding the device, comply with the rules and regulations that apply in your

country. If in doubt, consult your local waste disposal facility.

TinyBright IP

R10 / G10 / B10 / W10 3000K / UV10 / A10 / W10 5600K

Power consumption: 15 W

Supply voltage: 100 - 240 V ~ 50/60 Hz

Degree of protection: IP65

Mounting options: oor placement or hanging, ground spike

Dimensions (W×H×D): without ground spike: 122 mm × 144 mm × 136 mm

with ground spike: 122 mm × 353 mm × 136 mm

Weight: 0.95kg

Ambient conditions: Temperature range: 0 °C...40 °C

Relative humidity: 20 %...80 % (non-condensing)

ö Locking screw for the bracket

# Bracket for floor placement or hanging

$ Removable ground spike

% Power cord

& Pressure compensation valve

TinyBright IP

ö# $

Connecting the DMX IP65 connectors

Proceed as follows to connect the DMX-IP65 connectors:

ö Insert the plug completely and straight into the coupling.

# Make sure that the exible sealing ring has complete contact.

$ Turn the union nut straight onto the thread of the coupling.

Hand-tighten the union nut.

Stairville TinyBright IP User guide

Stairville TinyBright IP User guide

Stairville TinyBright IP User guide

Related papers

Other documents