Pneumatic conversion kit for in-wall tank
K-8108
Features
•For use with the K-18829 2" x 4" in-wall tank and carrier
system
Required Products/Accessories
For wall-mount installation
K-18829 2" x 4" In-wall tank and carrier system
K-26572 Power accessory kit for touchless flush actuator
plates
Recommended Products/Accessories
K-23251-F Flush actuator plate
K-23252-F Dual-flush actuator plate
K-78041 Dual-flush touchless actuator plate
Codes/Standards
ASME A112.19.5/CSA B45.15
KOHLER® One-Year Limited
Warranty
See website for detailed warranty information.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-21-2023 01:56 - US/CA
Pneumatic conversion kit for in-wall tank
K-8108
2-3/8"
(60 mm)
4-1/2"
(114 mm)
3"
(76 mm)
15-13/16"
(402 mm)
Technical Information
All product dimensions are nominal.
Toilet type: In-wall mount
Waste Outlet: Wall
Flush type: Dual-Flush Technology
Fixture Supply Requirements
Max static pressure: 80 psi (551.6 kPa)
Notes
Install this product according to the installation
instructions.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-21-2023 01:56 - US/CA
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Kohler 6299-0 Dimensions Guide
-
Kohler K-77271-0 Dimensions Guide
-
-
-
-
-
-
Kohler K-75891-CP Dimensions Guide
-
-