aLora PD321716 User manual

Brand
aLora
Model
PD321716
Type
User manual

The aLora PD321716 is a versatile pendant light fixture designed to provide stylish and functional illumination for various indoor settings. With its pre-wired LED module, this fixture offers energy-efficient lighting and eliminates the need for bulb replacements.

Key capabilities of the aLora PD321716 include:

  • Dimming Compatibility: It supports dimming using Electronic Low Voltage (ELV), TRIAC, or 0-10V type dimmers, allowing you to adjust the brightness to suit your ambiance and needs.

  • Adjustable Mounting Options: The fixture provides both horizontal and vertical orientation options, giving you the flexibility to install it according to your desired placement and décor.

The aLora PD321716 is a versatile pendant light fixture designed to provide stylish and functional illumination for various indoor settings. With its pre-wired LED module, this fixture offers energy-efficient lighting and eliminates the need for bulb replacements.

Key capabilities of the aLora PD321716 include:

  • Dimming Compatibility: It supports dimming using Electronic Low Voltage (ELV), TRIAC, or 0-10V type dimmers, allowing you to adjust the brightness to suit your ambiance and needs.

  • Adjustable Mounting Options: The fixture provides both horizontal and vertical orientation options, giving you the flexibility to install it according to your desired placement and décor.

PD321716
Pendant
WARNINGS AND CAUTIONS
• Make sure POWER is COMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all times during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference
TECHNICAL SUPPORT
1.855.855.8926
technicalsupport@aloralighting.com
Please Note:
• This Alora LED fixture comes with pre-wired LED module(s)
• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary contact with
the module could cause permanent damage
• For dimming, an ELV (Electronic Low Voltage), TRIAC or 0-10V type of dimmer is required
• 120-277V input
Hot (Black)
Wires
Neutral (White)
Ground (Green)
Dim - (Gray): Optional
Dim + (Purple): Optional
NOTICE
• The important safeguards and instructions outlined in this sheet cannot cover
all possible conditions and situations that may occur. It must be understood
that caution and certain care factors must be followed. These instructions are
provided for your safety and we highly recommend that a licensed, trained
electrician install this unit.
ASSEMBLY INSTRUCTIONS
CANADA :
USA : 3035 E. Lone Mountain Rd - Las Vegas, NV, 89081
www.aloralighting.com
20230619
P:
1.855.855.8926
19054 28th Avenue Surrey - BC V3Z 6M3
1a.
5a.
5b.
5c.
6a.
6b.
6c.
6d.
7a.
1b.
1c.
1e.
2a.
2b.
Step 1
Remove fixture from its original package.
Step 2
Separate mounting plate (1c) from canopy (2a) by removing canopy
screws (2b).
Step 3
Attach mounting plate (1c) to electrical junction box (1a) using junction
box screws provided (1e) in hardware package.
Step 4
Make proper electrical connections (black to hot “L”, white to neutral “N”,
green to “GND”, Dim + to purple, Dim- to gray) with wire nuts provided in
hardware package.
Step 5
Attach canopy (2a) to mounting plate (1c) with canopy screws (2b).
Step 6 (For Horizontal Orientation Option)
Secure non-powered backplate (5b) to mounting surface by compressing
butterfly clips (5a) through 3/8” holes in ceiling and then use screws (5c)
to fasten. (See Illustration 1 for optional mounting option). Attach
non-powered decorative cover (6a) to non-powered backplate (5b),
followed by pivot (6b) and secure with decorative ring (6c) by threading
clockwise. Align hole in pivot (6b) and fixture end (7a) and secure with
screw (6d).
Step 7 (For Vertical Orientation Option)
Remove fixture end (7a) and cut excess wire (See Illustration 2). Secure
bead end (10a) to fixture by threading clockwise (See Illustration 3)
Step 8
Remove protective paper.
You are now ready to enjoy your fixture.
10a.
7a.
Wire
Illustration 3Illustration 2
Illustration 1: Optional Mounting Option
With Junction Box
Attach non-powered
backplate (5b) to non-
powered junction box
(8a) with screws (8b).
5b.
8a.
8b.
  • Page 1 1

aLora PD321716 User manual

Brand
aLora
Model
PD321716
Type
User manual

The aLora PD321716 is a versatile pendant light fixture designed to provide stylish and functional illumination for various indoor settings. With its pre-wired LED module, this fixture offers energy-efficient lighting and eliminates the need for bulb replacements.

Key capabilities of the aLora PD321716 include:

  • Dimming Compatibility: It supports dimming using Electronic Low Voltage (ELV), TRIAC, or 0-10V type dimmers, allowing you to adjust the brightness to suit your ambiance and needs.

  • Adjustable Mounting Options: The fixture provides both horizontal and vertical orientation options, giving you the flexibility to install it according to your desired placement and décor.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents