METALLICGEAR MG-NE520G User manual

MG-NE520G
Brand
METALLICGEAR
Model
MG-NE520G
Type
User manual

METALLICGEAR MG-NE520G is a versatile PC case that supports various motherboard sizes, including E-ATX up to 280mm wide, and offers ample space for high-end components. It features extensive cooling options, accommodating multiple fans and radiators in the front, top, and rear panels. The case includes a built-in RGB lighting system with customizable colors and effects, controlled via dedicated buttons on the front panel. Front I/O ports include two USB 3.0 ports, headphone and microphone jacks, and reset and power buttons, providing easy access and connectivity.

METALLICGEAR MG-NE520G is a versatile PC case that supports various motherboard sizes, including E-ATX up to 280mm wide, and offers ample space for high-end components. It features extensive cooling options, accommodating multiple fans and radiators in the front, top, and rear panels. The case includes a built-in RGB lighting system with customizable colors and effects, controlled via dedicated buttons on the front panel. Front I/O ports include two USB 3.0 ports, headphone and microphone jacks, and reset and power buttons, providing easy access and connectivity.

INSTALLATION MANUAL
MANUAL - V1.2MG-NE520S
MG-NE520A
MG-NE520G
Thank you for choosing the MG NEO chassis. Please check your model type (NEO-G/Air / Silent) and
take your time reading this manual before installing your system.
Check www.metallicgear.com for the latest information and manual version.
FANS & RADIATOR SUPPORT:
FRONT
2x 120
2x 140
REAR
1x 120
TOP
2x 120
2x 140
FRONT RADIATOR: 240rad: max 124x320 mm
280rad: max 144x320 mm
FRONT I/0:
21x Motherboard/SSD screws
4x PSU 6-32 screws
8x Fans screws
1x Motherboard M4 stand-off
2x Long Thumb 6-32 screws
6x Zip ties
ACCESSORIES
1. Headphone
2. Microphone
3. 2x USB 3.0
4. Reset Button
5. RGB Color/Mode
6. D-RGB Mode
7. D-RGB Color
8. Power Button
CLEARANCES
CPU Cooler height: 170 mm
GPU length: 400 mm
PSU length: 250 mm
ATX Motherboard width: 280 mm
Vertical GPU ready: yes
OVERVIEW
3.
1.
8.
7.
6.
2.
3.
1.
8.
5.
4.
2.
3.
1.
8.
4.
2.
Connect to
Power Supply
Motherboard header:
9x 4x
4x
Supports:
*E-ATX, ATX, m-ATX, ITX
(*E-ATX up to 280mm width)
Use the velcro straps and zip ties to
tighten the cables.
HARDWARE INSTALLATION
MOTHERBOARD POWER SUPPLY
SSD HDD
FRONT I/O CABLES CABLE MANAGEMENT
Remove the SSD
bracket first.
3
1
2
Power LED
Reset SW
HD
AUDIO
USB 3.0
Power SW
Connect to
Motherboard
NEO-G/Air only
NEO Silent/Air only
NEO Silent only
POWER
LED
POWER
SWITCH
NOT USED
HDD
LED
RESET
SWITCH
(NEO-G and NEO AIR only)
LIGHTING CONTROLS
Daisy-chain RGB Products
Solid
Breathing
Color Cycle
Short Press to change color:
Long Press to change mode:
Press and Hold to turn off/switch
to motherboard control.
RGB-Control Button
RGB CABLES RGB CONTROL
D-RGB Color
Button
D-RGB Mode
Button
MOTHERBOARD
D-RGB HEADER
To Motherboard D-RGB Header 5V
D-RGB CABLES D-RGB CONTROL
Solid
D-RGB Color Effects
Radar
Sparkle
Breathing
Rainbow
Press and Hold the D-RGB Mode button to turn off/switch
to motherboard control.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

METALLICGEAR MG-NE520G User manual

MG-NE520G
Brand
METALLICGEAR
Model
MG-NE520G
Type
User manual

METALLICGEAR MG-NE520G is a versatile PC case that supports various motherboard sizes, including E-ATX up to 280mm wide, and offers ample space for high-end components. It features extensive cooling options, accommodating multiple fans and radiators in the front, top, and rear panels. The case includes a built-in RGB lighting system with customizable colors and effects, controlled via dedicated buttons on the front panel. Front I/O ports include two USB 3.0 ports, headphone and microphone jacks, and reset and power buttons, providing easy access and connectivity.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents