•
IMPORTANT SAFETY INSTRUCTIONS
Operating conditions
This device has been designed for indoor use
only. Keep this device away from rain and
moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Electric shock caused by short-circuit
Do not modify the mains cable or the plug.
Failure to do so could result in electric
shock/death or fire.
Electric shock caused by high voltages inside
Within the device there are areas where high
voltages may be present. Never remove any
covers. There are no user-serviceable parts
inside.
Danger to children
Keep the device away from children. Do not
operate the device unattended. Do not leave
packaging material lying around carelessly.
Intended use
• This device is a compact and portable ground fog
machine that creates a heavy ground fog by
evaporation of dry ice in hot water. The fog
dissipates without rising. Output and flow are easily
controlled, thanks to an adjustable multi-level
control arm. The housing is made of corrosion-
resistant polyethylene.
• The device is designed for professional use on
stage and is not suitable for use in households.
• This device may be used only by persons with
sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and
experience. Other persons may use this device
only if they are supervised or instructed by a
person who is responsible for their safety.
• Only use the product according to the instructions
given herein. Damages due to failure to follow
these operating instructions will void the warranty!
We do not assume any liability for any resulting
damage.
• We do not assume any liability for material and
personal damage caused by improper use or non-
compliance with the safety instructions. In such
cases, the warranty/guarantee will be null and void.
• Unauthorized rebuilds or modifications of the
product are not permitted for reasons of safety and
render the warranty invalid. Maintenance and
service operations are only to be carried out by
authorized dealers!
Danger due to electricity
• This device falls under protection class I. The
power plug must only be plugged into a protection
class I outlet. The outlet must be protected by
residual current breaker (RCD). The voltage and
frequency must exactly be the same as stated on
the device. The electric installation must be in
compliance with IEC standards. The earth has to
be connected. Failure to do so could result in
damage to the device and possibly injure the user.
• The circuit must be protected by minimum 11 A.
• Always plug in the power plug least.
• Never let the power cord come into contact with
other cables! Handle the power cord and all
connections with the mains with particular caution!
Do not touch the power cord and connectors with
wet hands as it may cause electric shock.
• Make sure that the power cord is never crimped or
damaged by sharp edges. Check the device and
the power cord from time to time.
• Always disconnect from the mains, when the
device is not in use or before cleaning it. Only
handle the power cord by the plug. Never pull out
the plug by tugging the power cord.
• Cleaning of the product is limited to the surface.
Make sure that moisture does not come into
contact with any areas of the terminal connections
or mains voltage control parts. Only wipe off the
product with a dry, lint-free cloth. Before cleaning,
disconnect the product from the mains.
• If this product is no longer working properly or is
visibly damaged, take it out of operation and
consult your local dealer. Do not attempt to repair
the product yourself.
Risk of fire
• Do not cover the device nor any ventilation slots.
Do not place the device near any direct heat
source. Keep the device away from naked flames.
• Do not operate the device unattended.